FLTWS
Headphoneus Supremus
Shouldn't replacement parts be the same as for HD800S?
Yes, I think Sennheiser is avoiding a lot of duplicate part numbers by listing the HD800S only.Shouldn't replacement parts be the same as for HD800S?
Those metal grill covers (#020 if this is what you are referring to) are p/n 533369 and the last time I checked the price it was ≈ $14 each.
I have 2 sets that I have removed from my 800's, so if you want a set let me know and we can work out the details.
But I'd also suggest as a possibility, if SQ is high on your priority list , to remove them and see if there is any change for the better, or not.
JJ
I usually have to call Sennheiser and talk to the repair/parts department to order the parts I need for the 800's.
I've never been able to order them online.
What I noticed after removing the grills was a less veiled acoustic presentation.
Less added resonances that makes for a 'cleaner' experience.
It is (relatively) easy to remove them and then put them back in, to determine if this is an improvement, or not, for you, assuming you have the tools and know what you are doing, etc.
It is one of 3 basic mods I have performed on my 800's.
JJ
No I don't have a write up, but perhaps there is a you-tube video.
It's really not that hard, assuming you are familiar with performing such delicate tear downs, not to mention putting it all back together, as there are only 6 tiny torx screws.
Just make sure you don't slip with the torx bits and don't force anything.
These 800's are designed very well for being repaired/modified/taken apart and re-assembled, multiple times.
JJ
Changing the center grill with felt would alternate the sound significantly wouldn’t it ? What effects have u observed by far ? Thank youSure, here you go.
Note: I have changed the small mesh screens to felt, in the very center of the driver as well
JJ
Interesting info and experience, thanks. The felt insert reminds me of the SuperDupont Resonator (SDR) that is so popular among many HD800 owners.I didn't notice much, if any, change at all.
I even tried with it being completely open with the same results.
And yeah I thought I had really messed up and might need all new drivers etc.
I mean that is the center of the driver and the 'back wave port' so to speak, so I was in 'unknown territory' so to speak.
Until I listened, and listened some more as I continued to fuss with this 'change'…
The only reason I changed them was because I inadvertently collapsed one of them, so I pulled it all the way out and listened, then pulled the other side and listened again etc.
All the way until I had installed the felt inserts and have left it that way ever since.
They aren't even glued in…
JJ