icebear
Headphoneus Supremus
- Joined
- Jan 9, 2014
- Posts
- 1,640
- Likes
- 362
... is 12 AWG and has litz copper and personal silicone conductors to replace the stock AC cable ...
That might be a first , I guess it provides a lubed sound
... is 12 AWG and has litz copper and personal silicone conductors to replace the stock AC cable ...
I've had my HD800 for a year and a quarter now. Tried about 15 amps (mostly vintage as I collect these but also some decent hp amps from Schiit, Matrix and Audio gd) 5 dacs (including Arcam, Cambridge audio, Beresford) and I can tell you FROM EXPERIENCE (yes I did shout that bit! ) that the Senn's main characteristic is transparency.
This is once you learn their basic power requirements. And this is as simple as this (there will always be exceptions as nothing is absolute)
More power = more bass. High current/ low impedance amps will give them razor sharp speed and dymanics up top but they can sound lacking below. High impedance amps will feed them more voltage and give them more bottom end and fullness into the mids, but sometimes at the expense of sub level tightness.
Now this is where the experience part comes in. Until you have tried many amps or many dacs, you really won't know that the HD800 are extremely transparent. This is because they sound like whatever they are plugged into.
So, when experienced members give you recommendations, or are trying to persuade you to try other equipment, it is not because they are trying to persuade you - that you are wrong about this headphone. It is because they have learned themselves what is good or bad and are trying to help you.
Now if it comes down to a mistrust of others subjective liking, then you really shouldn't be on a forum that gives out headphone advice and therefore just trust your own ears and go it alone.
But I would seriously stop asking all the technical questions and listen to the experienced members advice on system matching, because knowing why an impedance curve affects this and that will not - I repeat NOT help you enjoy your 80's pop music.
There are far too many variables in any hifi component to say what will happen if you change a resistor and what change that will be or how it will affect the sound- and there can be no 'general' answer to this.
Yes. I run mine with a custom Compliment2. It has the same wire as the C2 but they have metal/kevlar shielding (the stuff used their on Spore cables).
Impressions compared to the stock cable?
Compared it to the Gungnir and while it was close, I liked the Gungnir better. These days I don't prefer the Gungnir/HD800 pairing, so I would have to reassess.
Thanks, any reason why you thought the Gungnir was better at the time?
Sorry all, after searching the thread about the gungnir dac, I feel my question was a bit redundant, but t thanks for the feedback. I feel I should save my money and see if the yggdrasil dac would be good for the HD800. Hope you all have a great day
Andrew/ Reddog.
What about the Musical Fidelity M1 DAC? Is it any good with the HD800? I'm particularly curious about how it compares against the Cambridge DacMagic Plus.
...
love to hear some of your impressions of other DACS that you feel surpass the ARCAM's performance. wink.gif