ken6217
Headphoneus Supremus
I’d have to believe they would work something out with you.
Well, this just happened tonight. The leather had been working itself out for a little bit over a period of about a month, I was gently trying to tuck it back in but was getting annoyed -- and it kept working itself out again. This is not even rotating them, they have been on the headphone untouched. Tonight it just completely fell apart. It's pretty much unusable at this point. The more I try to fix it, the worse it gets.
I emailed Abyss, hopefully they can help out with something. I doubt this is under warranty, but man, the thought of paying $400 for a replacement set for the same kind of quality doesn't sit right.
I wasn’t aware of this, but initially Joe was considering giving users the options of changing the backing of the abyss with different materials.
http://www.theaudiobeat.com/rmaf2012/rmaf2012_abyss.htm
It goes on to say “One interesting feature of the AB-1266 is the 'phones' interchangeable driver covers. Abyss will offer an array of replacements in different kinds of wood, giving owners the ability to tailor the sound of their 'phones, not to mention their looks.”
I got a bit of a discount on new pads. I'm thankful for that and the rapid response. Still kind of a bummer. Just need to be extra careful when removing them from the frame. The design of the pads could be improved IMO so that one didn't have to pull at the actual leather (thus the adhesive) to remove the pad. Would be better if the plastic ring with the holes were slightly bigger diameter so that that is what you grabbed onto instead.I’d have to believe they would work something out with you.
The magnet is pretty strong. Did you rotate/adjust the pad like crazy?
No - I think that photo was before the first AB-1266 was released.Never happened?
I got a bit of a discount on new pads. I'm thankful for that and the rapid response. Still kind of a bummer. Just need to be extra careful when removing them from the frame. The design of the pads could be improved IMO so that one didn't have to pull at the actual leather (thus the adhesive) to remove the pad. Would be better if the plastic ring with the holes were slightly bigger diameter so that that is what you grabbed onto instead.
Nope, I'd say normal amount. But over time, I would assume everyone rotates the pads a decent amount to get the right fit. They should hold up to that IMO. It is what it is.
No. It just takes some time adjusting to find the right position as you probably know. And even then, sometimes you may want to move it to get a different sound signature. However, I think I've found my ideal spot so the new set will likely be set and forget.But once you have it set to the right position for you, do you still take it off and on?
I didn't realize you were gripping it by the earpad. I only grip by the metal ring. I'd be too afraid I'd rip the leather off.
I might sell these Susvaras. The TCs, with the Super Conductor cables, through the DAVE I recently purchased, into the WA33 amp are the CLEAR winner between the two. The TCs scaled up something crazy with the addition of the DAVE (I previously had the TT2).
I tried the SC cables on my Susvaras, with an adapter, and they sounded better, but not TC levels.
I guess to be fair, I should try out the Lazuli Nirvanas on the Susvaras, which I probably will do. But, I'm skeptical
So, basically, I'm saying if you have to choose between the Susvaras and TCs, I say pick the TCs
He tows them in to the front. That worked for me as well.
Btw, so if there is more bass on one side, I need to shift the headphones left and right to even out the spacing between the ear pads and my face I assume?
I got a bit of a discount on new pads. I'm thankful for that and the rapid response. Still kind of a bummer. Just need to be extra careful when removing them from the frame. The design of the pads could be improved IMO so that one didn't have to pull at the actual leather (thus the adhesive) to remove the pad. Would be better if the plastic ring with the holes were slightly bigger diameter so that that is what you grabbed onto instead.
Nope, I'd say normal amount. But over time, I would assume everyone rotates the pads a decent amount to get the right fit. They should hold up to that IMO. It is what it is.
No. It just takes some time adjusting to find the right position as you probably know. And even then, sometimes you may want to move it to get a different sound signature. However, I think I've found my ideal spot so the new set will likely be set and forget.
I'm really not sure how the pad disintegrated so rapidly. It seemed like the glue got less adhesive over time and more sort of gummy. Then last night it seemed to just all come apart at once. I'll be very careful with this new set. Not something I want/need to spend money on!
Here's what Abyss wrote re: getting the pads off. They must have seen my post: "Note you can grab the plastic magnetic ring to remove these without pulling on the lambskin, just have to get 5 fingers around the ring and squeeze while breaking the magnet seal from one side." I'll certainly be more conscious of grabbing the ring and the ring only.
I do the same, at least I try to. Cup, grip, lift. I never just grab the leather. I don't have the biggest hands, so maybe I'm not gripping the ring as firmly as needed. As I mentioned, the leather of the pads slightly extends beyond the ring. I try to use my fingertips to just grab the ring, but I feel like it's easy to inadvertently tug on the leather slightly as well. Maybe it's just me.I personally have never removed those pads by holding the leather. I just tried to remove them naturally again to see what i do, and i do exactly as abyss descries in your post. my palm cups the entire pad, and i place my 5 fingers at the base/plastic, and i pop them off from there.
Replied to the wrong person.