[Jeff Y]

  Putting pressure on pleather pads may stretch and deform it over time.
Velour or soft fabric pads suffer much less from this kind of treatment.
 
It's especially bad to put pressure on the pads or headband for long term storage (months).

I was afraid so. I guess it may be less aesthetically pleasing but a gun box would do a better job for storage then. 
Thank you for the response.

 

[acain]

Laser cut mesh screen painted flat black with gold.
 

 

[enkidu]

  It's just prototype, made of zink plated steel sheet 0.9mm thick.
Don't like the design, something wrong, but can't get what exactly!
Need to redraw and re-cut. All bends completed with benders. I mean we have many of them, for metal sheets bending.

Gotcha. I think it looks pretty good but seeing it in person is always different. Perhaps a bead or two along the main stem would add visual interest and add some stiffness?

 

[aylmert]

Old routers...

 

[Suraki]

I'm happy to found this topic!
Here is one of my older prototype:
[IMG=http://thingiverse-production-new.s3.amazonaws.com/renders/b8/b3/9a/94/c1/Photo_2014._12._02._22_05_26_preview_featured.jpg]http://thingiverse-production-new.s3.amazonaws.com/renders/b8/b3/9a/94/c1/Photo_2014._12._02._22_05_26_preview_featured.jpg[/IMG]
The 3d printable files are available from Thingiverse

And another one from other topic: Voronoi pattern headphone stand

 

[acain]

Very nice what is 3d printed the base?

 

[Suraki]

I printed with the same FDM technology the lower and the upper part also. Then covered by wooden and chrome like adhesive foils.

 

[WAAM]

Went through the whole thread picture gallery and found those to be most interesting/cool/beautiful/practical ones:
 
http://cdn.head-fi.org/3/32/900x900px-LL-327ca137_MD-6886_20150416110832_8286f49a2c45a218.jpeg
 
http://cdn.head-fi.org/e/e9/900x900px-LL-e9437146_DSC04238.jpeg
 
http://cdn.head-fi.org/2/27/900x900px-LL-272fc48c_c36020121115004823.jpeg
 
http://cdn.head-fi.org/1/1a/900x900px-LL-1acc1ca6_IMG_6913.jpeg
 
http://cdn.head-fi.org/2/2f/900x900px-LL-2f2f1e78_3.png

 

[Dimon Hell]

Done!
With some kinda wire organizer!

 

[acain]

Nicely done

 

[WAAM]

Nice Dimon. Nvm, about posting into different threads. Didn`t think about that all ppl don`t keep eye on all sub-forums. Sorry

 

[Dimon Hell]

My fault. 

 

[BassFanatic]

@WAAM Do you know how the third stand in those pictures you linked too was created? looking to make my first stand and i'm just not sure where to start...

 

[i luvmusic 2]

(I made this based off of @towert7's original design)
I started with wooden dowels and a cedar base (not pictured) purchased from Lowe's for about $5.

After sizing, shaping, sanding, and staining.
I drilled holes and put pegs and glue into the connecting pieces. This is the final product.

 
 

  Me again.
New concept, just prototype, maybe this one goes "in world".
   
And here's with my first hp - Takstar Pro80:
   

 
 

  Laser cut mesh screen painted flat black with gold.
 

 
 

  Done!
With some kinda wire organizer!

I was away for a while these are the things that i've missed,Good Job Guys

 

[sp3llv3xit]

  Laser cut mesh screen painted flat black with gold.
 

 
 
When are you going to start taking orders?