fr33d0m
New Head-Fier
- Joined
- Mar 27, 2016
- Posts
- 37
- Likes
- 12
I just noticed something just now sir. It plays well upright tilt, sideways both left and right and face down. It wont play flat face up and forward downward tilt
Good day everyone!
I just want to share what happened. After 5 days with sleepless nights, i finally made my D-303 working. I have spent so many drawings and notes on the combination of the 5 pots. Now my D-303 came back to life. I am so happy!
It has been a longer time since this happened to me. I have not found a direct replacement until today. But I found a different solution. I do not have a picture from it but I will try to explain what I did. Just in front of the axle, where this gear has to be fixed, is a metallic structure. I glued some kind of foam to it and, if the thickness is sufficient, it will keep the gear on the axle.Hi everyone
I just acquired an awesome D-25 that seems to work, but has the middle gear problem...and I got pretty far with trying a repair (removed and re-lubricated said gear though I'll likely have to get a replacement off eBay as it is pretty fragile) when the tiny split washer (I've seen it called a c-clip as well) went flying into the ether, grinding progress to a halt. I can't seem to find a post or other information here and elsewhere that advises how and where to order the exact right replacement for this split washer/c-clip, and I'm not sure what kind of size, circumference, or dimension terminology to use to locate it on the marketplace. It's mentioned in dozens of places, but no actual "this is the thing that you need to order" -level guidance. Is there anyone familiar with this ubiquitous tragedy who can point the way to ordering the part from somewhere (or perhaps there's another solution to keeping the gear on the shaft)? Any and all help (especially at a layman level) would be gratefully received. Thanks for your time!
May I ask you some additional information: I have this problem with an D25. It does not recognize the CD when flat on the table. So, what I understand from your post is that the spindle motor has to be replaced.Classic symptom of the motor going bad, you need to replace it.
I have used a combination of both. Was using it via an AC adapter when the issue happened (no batteries present). Just tried putting in some batteries a couple days back and the headphone out is still dead.Weird … try removing the batteries and replacing them, or are you using an AC adapter ?
Well done. Sir.I just noticed something just now sir. It plays well upright tilt, sideways both left and right and face down. It wont play flat face up and forward downward tilt