DR650SE
500+ Head-Fier
- Joined
- Sep 7, 2013
- Posts
- 567
- Likes
- 88
Rog
Sent from XT912 / CM10.2
Sent from XT912 / CM10.2
I would (and did for some time) supply fully bypassed modifications (DAC to Pins) for a fraction of the price.
And that included internal caps..
About 7 months ago bought: http://www.ebay.co.uk/itm/MUNDORF-Silver-Gold-LOD-for-IPOD-IPHONE-/281206005481?pt=UK_MP3_Player_Accessories_Cables_Adapters&hash=item41792f1ee9
Now I can make this (with Wima 4.7uF 63V 5% inside) for around than £15
Got some Mundorf silver/gold wire thinking... well, not much
A few days later found: http://eandt.theiet.org/magazine/2011/11/believe-in-better.cfm
Anybody here A/B the 7G with 5G iMod, lossless files?
Hi,
Do you think i could get away with the following Kemet caps?
http://uk.rs-online.com/web/p/polyester-film-capacitors/0191979/
They are rated at 63 volts not the 50v that were recommended on the link below but are 4.7uF:
http://uk.mouser.com/ProductDetail/Kemet/MMK5475K50J06L165TR18/?qs=sGAEpiMZZMv1cc3ydrPrF4Cr/vHpDzYXwcNVe015xcs=
Thanks for your help!
I have both. The 5G DIY imod in my case blows the 7G out of water. In fact, it may blow out many other high-end daps out of water. I know many won't believe.
The voltage is fine, whether 50 or 63. It's the size of the caps you want to make sure they will fit. With the Tarkan card, you can easily fit the pair of the 50V caps inside ipod (with the fat back plate). With the 63V caps, you will need trim the Tarkan aggressively in order to fit the caps. Trim the Tarkan at your own risk.
In terms of a LOD connector, where do you get the ones I see that are big and can accommodate also the caps inside?
Thanks