Redcarmoose, have ever done a comparison between the 1Z and 1A somewhere here on Head-fi? I have the Z1R headphones and wondered which pairs best w/ those cans?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
SONY NW-WM1Z / WM1A
- Thread starter leylandi
- Start date
- Status
- Not open for further replies.
Tawek
500+ Head-Fier
- Joined
- Nov 18, 2015
- Posts
- 560
- Likes
- 741
Probably nwz x1060 /61Redcarmoose, have ever done a comparison between the 1Z and 1A somewhere here on Head-fi? I have the Z1R headphones and wondered which pairs best w/ those cans?
Ok, I'm confused......
meomap
Headphoneus Supremus
Hi,
1Z / Dock / Wireworld USB cable to Denafrips Terminator DAC VS
Jay Audio cdt2 mk2 transport ( CD only ) / Wireworld Coax rca to Termi DAC.
Transport outperforms 1Z miles apart.
I was very surprise as well.
Transport outperforms my Esoteric K05 CD/SACD/DAC as well.
Same DAC and same tube hp amp as baseline test. Waiting for hmdi i2s cable to replace with coax, should sound much better.
1Z / Dock / Wireworld USB cable to Denafrips Terminator DAC VS
Jay Audio cdt2 mk2 transport ( CD only ) / Wireworld Coax rca to Termi DAC.
Transport outperforms 1Z miles apart.
I was very surprise as well.
Transport outperforms my Esoteric K05 CD/SACD/DAC as well.
Same DAC and same tube hp amp as baseline test. Waiting for hmdi i2s cable to replace with coax, should sound much better.
Redcarmoose
Headphoneus Supremus
Redcarmoose, have ever done a comparison between the 1Z and 1A somewhere here on Head-fi? I have the Z1R headphones and wondered which pairs best w/ those cans?
I have not, though I do have an upcoming review concentrating on three Sony headphones and how they compare. Maybe it will be posted in a couple days, maybe? It talks about the use of Sony gear and the synergy between it all. Nothing is bad, though some combinations seem a little better. IMO
But for some reason I like the 1Z with the Z1R, also the Sony/Kimber Cable is big change from stock, in this use! But again I like authority sounding replay, so maybe that’s why? There is a good chance someone would like the IA better. I wish my statements could be more defined but this stuff is all so good and all goes together so well. It’s not like there are any big mistakes to be made, like combining other gear. IMO
But the 1A is still super nice and adequate. My thing is if I find stuff musicality engaging then it passes. But in my humble opinion the TA desktop is really the best combo with the Z1R. It’s probably because the slight extra power gets a better damping factor for making the bass response slightly more clear?
Redcarmoose
Headphoneus Supremus
The only thing that I always talk about when comparing the 1A and 1Z (that I have not read about here) is SOUNDSTAGE.
Beyond simply the more flat tone of the 1A, the soundstage is way way different. The 1Z brings the elements way more forward and 3D. Yes the 1Z has a bass kick, but it also has a treble spike too. But the soundstage is thicker and more front to back and side to side.
Maybe this is something that would not be noticed right off in a shop also it may be more of an IEM thing? But it’s a huge reality when going over to the 1Z. This is especially noticeable if you use your 1A for two weeks then go back to the 1Z. This thickness is physicality of sound. It’s a different dynamic which brings a whole different experience especially when mixed with the extra bass and treble.
Thus 1Z supremacy in physicality.
And......1A marginalized physicality but still amazing sounding.
Beyond simply the more flat tone of the 1A, the soundstage is way way different. The 1Z brings the elements way more forward and 3D. Yes the 1Z has a bass kick, but it also has a treble spike too. But the soundstage is thicker and more front to back and side to side.
Maybe this is something that would not be noticed right off in a shop also it may be more of an IEM thing? But it’s a huge reality when going over to the 1Z. This is especially noticeable if you use your 1A for two weeks then go back to the 1Z. This thickness is physicality of sound. It’s a different dynamic which brings a whole different experience especially when mixed with the extra bass and treble.
Thus 1Z supremacy in physicality.
And......1A marginalized physicality but still amazing sounding.
Last edited:
Mathieulh
100+ Head-Fier
The 1A does because the Z1R are already warm cans, that said despite the low reported impedance, the Z1R scale really well with more powerful amp and I found the WM1A/Z lacks the power to drive the Z1R efficiency. They will still sound good, but nowhere near as exceptional as they would on more powerful equipment.Redcarmoose, have ever done a comparison between the 1Z and 1A somewhere here on Head-fi? I have the Z1R headphones and wondered which pairs best w/ those cans?
Redcarmoose
Headphoneus Supremus
The 1A does because the Z1R are already warm cans, that said despite the low reported impedance, the Z1R scale really well with more powerful amp and I found the WM1A/Z lacks the power to drive the Z1R efficiency. They will still sound good, but nowhere near as exceptional as they would on more powerful equipment.
Agree that in case someone simply wanted the 1Z for portable use.....OK ....but, there is better desktop solutions for less. The 1Z your paying a premium for size.
Redcarmoose
Headphoneus Supremus
Hi,
1Z / Dock / Wireworld USB cable to Denafrips Terminator DAC VS
Jay Audio cdt2 mk2 transport ( CD only ) / Wireworld Coax rca to Termi DAC.
Transport outperforms 1Z miles apart.
I was very surprise as well.
Transport outperforms my Esoteric K05 CD/SACD/DAC as well.
Same DAC and same tube hp amp as baseline test. Waiting for hmdi i2s cable to replace with coax, should sound much better.
Amazing! I like reading about a transport winning out over the dock as for me it does not.
Last edited:
nc8000
Headphoneus Supremus
Received my A45 today and as I expected I’m unable to hear any difference between it and the 1Z when feeding the 1000XM3 over BT with LDAC. The gui and userexperience is identical. The A45 lacks BT receiver but has FM receiver. The A45 fits nicely in the case for the XM3.
Mindstorms
Formerly known as Midnstorms
- Joined
- Oct 24, 2016
- Posts
- 1,055
- Likes
- 842
when you recharge your walkman when last bar its shown or when flasshing?? thanks...
auronthas
500+ Head-Fier
- Joined
- May 19, 2017
- Posts
- 587
- Likes
- 371
Most of the time i recharge walkman at last bar, only "one" time, i tested it until it's flashing. Not sure what's the battery percentage when it flashes, charging at too low , may not good for battery life. I think charging from 20-90% is good for battery endurance . Let's hear what others say...when you recharge your walkman when last bar its shown or when flasshing?? thanks...
Redcarmoose
Headphoneus Supremus
If you ever see the Walkmans go to 0% power, there is actually a unique screen message right before they turn off. Only saw it one time but was amazed at the use of red!
blazinblazin
1000+ Head-Fier
- Joined
- Nov 19, 2015
- Posts
- 1,120
- Likes
- 466
I charge 2 times per week. Did not notice anything.
- Status
- Not open for further replies.
Users who are viewing this thread
Total: 16 (members: 0, guests: 16)