[llamaluv]

Has anyone attempted to make EQ settings that will give a 1Z the tonality of a 1A or vice-versa?

 

[auronthas]

I would recommend just running it nonstop, for a few days, till it hits 200hrs. Burn-in sounds ridiculous sometimes, but it does make quite a difference on this device.

I would rather enjoying the evolution of sound during the burn-in stage, currently 180 hours .

 

[auronthas]

Thanks for your input. I also picked up a ALO Reference 8 cable, a beautiful built and sounding cable. My WM1Z has about 20hrs.

I picked up ALO Ref. 8 too, to replace defective (loose connection) Sony Kimber Kable muc-m12sb1, very welll matching with my Andros

 

[gerelmx1986]

I've tried connecting both outputs and the 4.4mm takes no. 1 priority, that means that 3.5mm is muted

 

[ryaneagon]

I picked up ALO Ref. 8 too, to replace defective (loose connection) Sony Kimber Kable muc-m12sb1, very welll matching with my Andros

Great. I love the cable, unfortunately it doesn't snap as secure as the stock Shure 846's thus can cut in and out if I move a lot. Seems to work great with campfire and DM6. ALO was gracious enough to send me a replacement as I thought it was a cable problem, turns out it's the IEM not the cable. Even though I don't have any problems with other aftermarket cables I own ( fiio LC3.5 and a Linsoul 4.4 cable) I'm thinking its because Shure uses tighter tolerances, maybe?

 

[OG10]

I have my wm1z playing in loop now, up to 15hrs.. hopefully I can tell a little bit of difference after the 50hr mark this week

Shall keep it on till I get 200hrs on Balanced for now.

 

[linux4ever]

At the 100hr mark, I noticed good difference and at 200. Then at 400.

Keep them playing at night too.

 

[480126]

 

[-TheWanderer-]

Please tell me where can I download firmware 1.00? Found only 1.01 ...

 

[kubig123]

Please tell me where can I download firmware 1.00? Found only 1.01 ...

Firmware 1.00 came installed in the first units, the 1.01 wa the first upgrade available.

 

[-TheWanderer-]

Firmware 1.00 came installed in the first units, the 1.01 wa the first upgrade available.

So you can download 1.00?

 

[nc8000]

So you can download 1.00?

No it can not be downloaded, only the upgrades

 

[gerelmx1986]

Using the 3.5 output , with a TRRS cable

 

[Mal Waldron]

Is your case from Valentinum? I'm thinking getting one...

 

[480126]

Is your case from Valentinum? I'm thinking getting one...

Yes, it is from Valentinum. He made great Cases!