jamato8
Headphoneus Supremus
Depends on the caps used. ESR can increase with time and uf can decrease.Being over 20 years old, do u think it need recapping?
Depends on the caps used. ESR can increase with time and uf can decrease.Being over 20 years old, do u think it need recapping?
That's so pointless. Balance into non balance doesn't make it balanceCan be worth it to use this cable instead re-terminate the R10?
https://www.ta-hifi.de/en/accessories/ad-4-4-6-3/
You still don’t get a balanced drive on the R10 so I don’t see the point. Reterminating isn’t too difficult and you can use better 4.4 mm than stock. Nobunaga and Pentaconn do make 4.4 mm jack.Can be worth it to use this cable instead re-terminate the R10?
https://www.ta-hifi.de/en/accessories/ad-4-4-6-3/
But allow me to use dacThat's so pointless. Balance into non balance doesn't make it balance
My intention was to use the balance Input from my ibasso,not for make my r10 balancedYou still don’t get a balanced drive on the R10 so I don’t see the point. Reterminating isn’t too difficult and you can use better 4.4 mm than stock. Nobunaga and Pentaconn do make 4.4 mm jack.
I get that, but why not just reterminate it? Those OFC 4.4 can improve the sound compared to stock 1/4” from Sony. I may shorten the cord on my R10 this weekend.But allow me to use dac
My intention was to use the balance Input from my ibasso,not for make my r10 balance
It is easy to determinate. I use an adapter as I do all of my phones so I can use any plug I want to on the R-10.I get that, but why not just reterminate it? Those OFC 4.4 can improve the sound compared to stock 1/4” from Sony. I may shorten the cord on my R10 this weekend.
never do so, you may damage drivers.Can be worth it to use this cable instead re-terminate the R10?
https://www.ta-hifi.de/en/accessories/ad-4-4-6-3/
I have the furutech 4.4 mm on mine but the length is the cable length is about the same as original. I bought Nobunaga OFC 4.4 mm jack recently for around $75 and may shorten the cable to around 5-ft and use this 4.4 mm plug instead for a slight upgrade in sound quality. Do you use 4.4 mm on yours or 4 pin XLR? I have reterminated pretty all my headphones cables to 4.4 mm. Even installed Pentaconn 4.4 mm female jacks on most my amps too.It is easy to determinate. I use an adapter as I do all of my phones so I can use any plug I want to on the R-10.
With the adapter I can use any plug I want to. I use 4.4, 3.5, 4 pin balanced etc.I have the furutech 4.4 mm on mine but the length is the cable length is about the same as original. I bought Nobunaga OFC 4.4 mm jack recently for around $75 and may shorten the cable to around 5-ft and use this 4.4 mm plug instead for a slight upgrade in sound quality. Do you use 4.4 mm on yours or 4 pin XLR? I have reterminated pretty all my headphones cables to 4.4 mm. Even installed Pentaconn 4.4 mm female jacks on most my amps too.
Here is my Headroom BUDA with a 4.4 mm headphone socket.
Yup, done that on one and will not do that ever again.never do so, you may damage drivers.
4.4 mm and female 4.4 mm to others?With the adapter I can use any plug I want to. I use 4.4, 3.5, 4 pin balanced etc.
No, the 4 pin that RSA used for everything and then Whiplash also used it. No degradation of sound. A simple inexpensive connector made in Japan. I have used it for years.4.4 mm and female 4.4 mm to others?