official ej07 graph by shuoer, ba driver is dual sonion 2389
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Shuoer impressions thread
- Thread starter SciOC
- Start date
-
- Tags
- ej07 shuoer shuoer s10 shuoer tape tape
sensible
New Head-Fier
- Joined
- Feb 13, 2012
- Posts
- 17
- Likes
- 27
Was having trouble finding a dissection photo for the Tape to modify so here it is.
I was quite certain this thing is glued in but after using the hair dryer for half an hour, it wasn't hot enough to melt the glue.
You see where this is going.
A little grinding and viola the centerpiece. At this point I do need to point out that this thing is mostly glued on.
Here's the back plate, everything is glued on and with the heat from the grinding, things began to fall apart by itself.
Not fully glued down, the image below shows where the glue stops. The black rubbery thing in the image above is a port.
That's it, the driver 94RA. From what I can tell it's 2 drivers facing each other. The tiny ports in the image above is where all the sound is coming out from. Which means it's now really tricky to do what I wanted in the first place.
The tips is screw on and glued together. The metal grille is just a metal grille. The mesh is mostly for dust/wax control, I removed it before dismantling and there wasn't any audible differences.
Big fail... Will need to add additional drivers to make it sound listenable. For now the V shape is incredible obvious, I will add the Knowles GV 32830 Quad BA into it and see how it goes. If you guys know how to play with Zobel network, please do share. Thanks
Hope this dissection series is useful to you.
I was quite certain this thing is glued in but after using the hair dryer for half an hour, it wasn't hot enough to melt the glue.
You see where this is going.
A little grinding and viola the centerpiece. At this point I do need to point out that this thing is mostly glued on.
Here's the back plate, everything is glued on and with the heat from the grinding, things began to fall apart by itself.
Not fully glued down, the image below shows where the glue stops. The black rubbery thing in the image above is a port.
That's it, the driver 94RA. From what I can tell it's 2 drivers facing each other. The tiny ports in the image above is where all the sound is coming out from. Which means it's now really tricky to do what I wanted in the first place.
The tips is screw on and glued together. The metal grille is just a metal grille. The mesh is mostly for dust/wax control, I removed it before dismantling and there wasn't any audible differences.
Big fail... Will need to add additional drivers to make it sound listenable. For now the V shape is incredible obvious, I will add the Knowles GV 32830 Quad BA into it and see how it goes. If you guys know how to play with Zobel network, please do share. Thanks
Hope this dissection series is useful to you.
joeexp
500+ Head-Fier
- Joined
- Aug 5, 2014
- Posts
- 654
- Likes
- 261
I was quite certain this thing is glued in but after using the hair dryer for half an hour, it wasn't hot enough to melt the glue.
Hope this dissection series is useful to you.
I heat gun would have done the trick.
forestitalia
100+ Head-Fier
- Joined
- Feb 21, 2014
- Posts
- 494
- Likes
- 249
Joined the club of Tapers, these tiny electrostatic buds are impressive. Let's see how long they last
Last edited:
gonzovision
New Head-Fier
Joined the club of Tapers, these tiny electrostatic buds are impressive. Let's see how long they last
Best of luck. Unfortunately mine lasted a whole seven days Volume, completely dropped off in the right driver.
The detail and clarity is outstanding though, really enjoyed them while they lasted. Personally the only downside I found were the mids being slightly thin, but the pros more than made up for it.
I did't try fix them myself, even though seems others have had some success, just couldn't accept that after a week.
I'm hoping these issues are resolved for a v2, and I'll happily purchase again.
Until then I said I'd give the Dunu dk 2001 a try.
eclein
1000+ Head-Fier
I received mine several months back and they are still going strong! Enjoy!
forestitalia
100+ Head-Fier
- Joined
- Feb 21, 2014
- Posts
- 494
- Likes
- 249
Sorry to hear that lasted so little, if mine have problem I will ask replacement.Best of luck. Unfortunately mine lasted a whole seven days Volume, completely dropped off in the right driver.
The detail and clarity is outstanding though, really enjoyed them while they lasted. Personally the only downside I found were the mids being slightly thin, but the pros more than made up for it.
I did't try fix them myself, even though seems others have had some success, just couldn't accept that after a week.
I'm hoping these issues are resolved for a v2, and I'll happily purchase again.
Until then I said I'd give the Dunu dk 2001 a try.
Agree with you about the mids, sound shape is clearly V, but not dramatic, enjoyable with almost everything.
Stax 001 are the opposite, mids are forward and prefer the stax for vocal music like opera, but need the dedicated amp with those.
GlobalJ
New Head-Fier
- Joined
- Oct 20, 2010
- Posts
- 20
- Likes
- 22
I've been rockin' the Tapes for about a month now. No QC issues yet.
I noticed they took a really long time to fully burn in (100hrs).
I'm using them with the BGVP DM6 stock cable with Spiral Dot++ tops, running it through my Hiby R6 Pro on the reference tonality and on high gain.
These things are addictive. The more I listen to them the more I love them. They do something different from any other hybrid I've used. Hard to put my finger on it. Might be the electrostat driver.
Decent instrument seperation. Pretty wide soundstage.
Great bass, though not basshead level, it is well controlled.
Mids seem a bit recessed/thin but still have a ton of detail. I'd call them slight V shape sound. The presentation is very unique in this region for me.
Highs also very nice. They extend where they need to without being overly emphasized. I feel like they have some roll off on the upper highs.
Overall these are some of my favs at the moment.
I noticed they took a really long time to fully burn in (100hrs).
I'm using them with the BGVP DM6 stock cable with Spiral Dot++ tops, running it through my Hiby R6 Pro on the reference tonality and on high gain.
These things are addictive. The more I listen to them the more I love them. They do something different from any other hybrid I've used. Hard to put my finger on it. Might be the electrostat driver.
Decent instrument seperation. Pretty wide soundstage.
Great bass, though not basshead level, it is well controlled.
Mids seem a bit recessed/thin but still have a ton of detail. I'd call them slight V shape sound. The presentation is very unique in this region for me.
Highs also very nice. They extend where they need to without being overly emphasized. I feel like they have some roll off on the upper highs.
Overall these are some of my favs at the moment.
eclein
1000+ Head-Fier
I love the Tapes and they are habit forming...lol. I’m also a huge Shuoer H27 fan, They are 3 driver hybrid with 2 Knowles on each side and tuned perfectly for me. Balanced sound with excellent low end and more detail I think then the tapes.
I wish I had the money for the EJ07 I think, the $800+ model but will try Tri I3 next I think. Has anybody heard the Singer and love it?
I wish I had the money for the EJ07 I think, the $800+ model but will try Tri I3 next I think. Has anybody heard the Singer and love it?
The Singer is a really good iem, pretty tiny but pack a great punch.
ulus
Head-Fier
Check this:I wish I had the money for the EJ07
I got mine for $509 on 11.11
forestitalia
100+ Head-Fier
- Joined
- Feb 21, 2014
- Posts
- 494
- Likes
- 249
Boyz, this are so good for the money. With progressive rock such as King Crimson I do not remember better unless put 00000000$
Tapes or EJ07?Boyz, this are so good for the money. With progressive such as king crimsono I do not remeber better unless put 00000000$
Edit - I went back a few posts and saw you had tapes.
Yeah I’m still loving mine. I think they are great value still.
Last edited:
forestitalia
100+ Head-Fier
- Joined
- Feb 21, 2014
- Posts
- 494
- Likes
- 249
Tape. EJ07. could be even better....
Users who are viewing this thread
Total: 10 (members: 0, guests: 10)