[Shanling]

It's been 4 months, has this issue been fixed? Also, when will the Shanling Controller app be available again on the iOS App Store?

Shanling Controller app was discontinued. All developments and updates are now coming out in our Eddict Player app.

Please test the Eddict player app with your UP2, if it works correctly.

 

[ozthegweat]

Shanling Controller app was discontinued. All developments and updates are now coming out in our Eddict Player app.

Please test the Eddict player app with your UP2, if it works correctly.

Ah, didn't know there was a new app. I tried the Eddict app, but there is no toggle for remembering the last volume setting (I have the UP2 with version 1.7.5).

I have an old Android device lying around where I installed the Shanling Controllor app and changed the setting there. Now it works like it should, the last volume setting is remembered when turning the device on

You/Shanling make great hardware, but the software is lacking.

 

[crabdog]

I posted my UP4 2022 review recently for those interested. Functionality is as solid as the original but the upgraded dual DACs make an audible difference and the golden wheel just looks sweet.

 

[Ufasas]

Will there be a shanling UP or UA product, which supports and headphones signal and microphone signal? For now i mostly see just headphones signal supported

 

[Mellowship]

Will there be a shanling UP or UA product, which supports and headphones signal and microphone signal? For now i mostly see just headphones signal supported

The UP2 and UP4 have their own microphones. Therefore there is no need for them to support cable microphone.
As for the UA line, I'm not sure.

 

[Shanling]

Will there be a shanling UP or UA product, which supports and headphones signal and microphone signal? For now i mostly see just headphones signal supported

UP5 supports in-line microphones when used as Bluetooth Receiver.

 

[holsen]

Hello @Shanling or fellow Head-fier. Quick question about the UP4/UP4 2022: Do either of these support car mode? I've got an UP2 out in my car and I'm really happy with the sound, but man I sure would like to tap into Auto On, Auto Connect and and dont really want to take my UP5 to the car.

 

[Shanling]

Hello @Shanling or fellow Head-fier. Quick question about the UP4/UP4 2022: Do either of these support car mode? I've got an UP2 out in my car and I'm really happy with the sound, but man I sure would like to tap into Auto On, Auto Connect and and dont really want to take my UP5 to the car.

Both UP4 and UP2 received Car mode with older firmware update:

https://en.shanling.com/article-UP2UP4MW200Update.html

 

[benoitb]

Just bought a 2nd hand Shanling UP2.

When trying to use the Shanling UP2 as a USB DAC on my phone I cannot get it to work with a USB-C to USB-C cable. It only works with a USB-C to USB-A dongle, and then a USB-A to USB-C cable. Is there any reason for this behavior ?

Another troublesome thing is the volume wheel. Turning it to decrease the volume works reasonably well but trying to increase the volume, most of the time it stagnates or decreases instead. Is there a way to correct that ?

 

[Shanling]

Just bought a 2nd hand Shanling UP2.

When trying to use the Shanling UP2 as a USB DAC on my phone I cannot get it to work with a USB-C to USB-C cable. It only works with a USB-C to USB-A dongle, and then a USB-A to USB-C cable. Is there any reason for this behavior ?

Another troublesome thing is the volume wheel. Turning it to decrease the volume works reasonably well but trying to increase the volume, most of the time it stagnates or decreases instead. Is there a way to correct that ?

UP2/UP4 do not support USB-C to USB-C cables, it's due to their USB input hardware.

If the wheel is misbehaving, it should be exchanged. You could buy new wheel mechanism from Linsoul: https://www.linsoul.com/blogs/announcements/shanling-audio-repair-services-at-linsoul-audio

 

[benoitb]

UP2/UP4 do not support USB-C to USB-C cables, it's due to their USB input hardware.

If the wheel is misbehaving, it should be exchanged. You could buy new wheel mechanism from Linsoul: https://www.linsoul.com/blogs/announcements/shanling-audio-repair-services-at-linsoul-audio

Thank you for this information. I contacted Linsoul by email as they do not seem to list replacement parts on their website.

Is the Shanling UP2 also not charging from a modern USB-C port ? I have a modern 65w GaN charger, and the Shanling seems to charge from the USB-A ports but not from the USB-C ports.

 

[Ufasas]

Will we have shanling UP device with usb-c-to-usb-c audio transfer/charging option in the future?

 

[Shanling]

Thank you for this information. I contacted Linsoul by email as they do not seem to list replacement parts on their website.

Is the Shanling UP2 also not charging from a modern USB-C port ? I have a modern 65w GaN charger, and the Shanling seems to charge from the USB-A ports but not from the USB-C ports.

Correct, UP2/UP4 are unable to charge from USB-C chargers.

Will we have shanling UP device with usb-c-to-usb-c audio transfer/charging option in the future?

UP5 can be charged through USB-C ports.

 

[ronaldlcm]

Dear all,
I am using shanling UP4(22) with Samsung Note10, for connecting koss Kph40/PP/kph30i or shp9500. I found once I turned on wavelet and set auto EQ for the selected model, it will have big distortion/crapping on sound. (Especially in the bass portion..) It never happened when direct connect with small dongles likes jcally jm6 or HTC one for the same song, same auto EQ in wavelet).

May I know any setting issue?

 

[Dobrescu George]

Dear all,
I am using shanling UP4(22) with Samsung Note10, for connecting koss Kph40/PP/kph30i or shp9500. I found once I turned on wavelet and set auto EQ for the selected model, it will have big distortion/crapping on sound. (Especially in the bass portion..) It never happened when direct connect with small dongles likes jcally jm6 or HTC one for the same song, same auto EQ in wavelet).

May I know any setting issue?

What app are you using to set the EQ?

I found that on Motorola, if I don't enable the EQ mode it has (DTS something something), there will be heavy disotrtions with most bluetooth dac amps