[Shanling]

Если карта 32gb тоже форматировать в ЕxFAT?

Standard for Head-Fi is to use English.

But otherwise, I format even our 16GB cards into exfat and they work flawlessly.

Sorry if this was answered previously... do I need to do anything on the M3s in order for it to use aptX when connecting to earphones? Do I just need to make sure that System Settings -> Bluetooth -> High Quality is turned on? How can I tell if aptX is actually being used?

My M3s is on v1.5 firmware and the IEMs I plan on using are Soundcore Liberty 2.

Thanks!

Yes, just turn on high quality in settings. And if you see A in status bar, it's connected over aptX, if S shows up, it's just SBC.

Whats the latest FW ver for these? the 3.5 on mine really is behaving weirdly, somtimes it come out completely imbalanced on one side, i plug off the jack and plug it in again and it changed to different side, againa nd its less prominent, but still leaning a tad to a side, then soemtimes nothing at all and completely fine.
it's super weird, as nothing really happened when i put it into LO mode, and i also tried doing the same with the 2.5 bal, plugging it off-on a couple times and it doesn't happen either... meaning it aint the amp, so now I'm stuck thinking there might ebs omething very weird going on with the 3.5mm female, like one fo the solder coming off and on randomly with movement or something... or its software thing. so thus I ask, where can i download the latest? clicking the download link on Shanling's page for M3s lead me nowhere
that link lead me to: http://jogm-taste.interserver.toplives.cn/download/55
i pick it from http://en.shanling.com/product/225

Seems link on product page is broken. You can find M3s downloads in Download section of our website http://en.shanling.com/download/55

For your problem, few things to try.

On software side, factory reset or downgrading/updating firmware, to rule out any software glitch.
On hardware side, clean out 3.5mm jack from any debris or take your M3s to some repair guy, who could check contacts inside.

 

[Sp12er3]

Then mine is actually the latest... Hmm is there a way for me to download& install older firmware?

Tho so far... I haven't been meeting that imbalance problem again. It mostly on happens on specific headphone (yes, but of which I've tested on other gears with no similar symptoms).
I've already brought them to two of experienced headphone modder and they mostly think it's something about the solder on the female connector, so with after trying out the 2.5 bal it sounds fine, thankfully not the amp.

 

[Shanling]

Then mine is actually the latest... Hmm is there a way for me to download& install older firmware?

Tho so far... I haven't been meeting that imbalance problem again. It mostly on happens on specific headphone (yes, but of which I've tested on other gears with no similar symptoms).
I've already brought them to two of experienced headphone modder and they mostly think it's something about the solder on the female connector, so and, if you thankfully not the amp as nothing such happening with the bal H/O

You can download older firmware from link I posted. Just proceed as if it was normal firmware update.

 

[Sp12er3]

Is there a way to add more than 10 playlist?
I love how there's a preset on naming the playlist but I wish I can add more than just 10.
If there's a way to keep them saved in the SD card? So that when I change SD card it changes according to them?
Can I edit the playlist from outside the player/hiby link?
Edit: yeah, tried and I do able to add more from 10 by Hiby Link... Thankfully~
Still will the playlist stay when I change SD card?

 

[Shanling]

Is there a way to add more than 10 playlist?
I love how there's a preset on naming the playlist but I wish I can add more than just 10.
If there's a way to keep them saved in the SD card? So that when I change SD card it changes according to them?
Can I edit the playlist from outside the player/hiby link?
Edit: yeah, tried and I do able to add more from 10 by Hiby Link... Thankfully~
Still will the playlist stay when I change SD card?

Playlists are saved in internal memory of the player, so changing SD card will not delete them.

 

[Sp12er3]

So does that mean if I change SD card, as long as the music is kept in the same directory addresses the playlist would still be working?

 

[Shanling]

So does that mean if I change SD card, as long as the music is kept in the same directory addresses the playlist would still be working?

In theory yes, but didn't test it.

 

[RogerThat67]

In theory yes, but didn't test it.

Would you mind sharing what options are available to create and update playlists? I confess I am lost trying to do so.
I love the sound of the player!

 

[Sp12er3]

The easiest really is using Hiby Link. You can add more than the player limit of 10 playlist and you can name & manage the list easily with it too.

 

[kvint230209]

Good day. If I drop music onto the player through the cable so that the files appear I need to restart the player, very often it happens, is this normal or some kind of glitch?

 

[Shanling]

Good day. If I drop music onto the player through the cable so that the files appear I need to restart the player, very often it happens, is this normal or some kind of glitch?

You mean your player is freezing? Right when you disconnect it from computer, when you are trying to update library or when you try to play new files?

 

[kvint230209]

No, it does not freeze, it just does not see the files that are on the flash drive, you need to turn the player on and off so that they appear in the list. Update included.

 

[Shanling]

No, it does not freeze, it just does not see the files that are on the flash drive, you need to turn the player on and off so that they appear in the list. Update included.

To update new files into player's library, you can go to settings and click on "Update my music immediately" for manual update, no need to restart device.

 

[kvint230209]

That's the whole point, I do it all, but only rebooting helps.

 

[kvint230209]

I'm sorry to bother you. Understood what was the matter. The player is not to blame, he switched the cord to another port and everything fell into place, the files are copied and deleted as expected and everything is displayed in the player even without updating the library.