FLTWS
Headphoneus Supremus
Jason, you are missing the B in remember, hopefully you can fix it before it prints!
Maybe that's part of the joke!
Jason, you are missing the B in remember, hopefully you can fix it before it prints!
I taped them together and used Velcro tape to stick them to the shelf.As I tested it... yes. it does and the costs are probably equal
When my Yggy arrives I will need to feed its balanced output to two different amplifiers. Is a device like the Emotive XBAL 1x2 a superior solution to a simple good quality Y-splitter XLR cable?
As I tested it... yes. it does and the costs are probably equal
I taped them together and used Velcro tape to stick them to the shelf.
I bought a pair (on Cozzi's recommendation) and they worked fine for me to drive both Ragnarok and Mjolnir 2. The only issue I ran into is they are very light weight and depending on the IC's you use they may not want to sit still wherever you place them unless you put a weight on them, which is what I did. A larger all in one box with a knob (and 2 or 3 way switching ability) would have been nicer, but for the money...
You'll need 2, one for each channel split.
Vidar listening impression (all 16/44). Becoming acquainted with Schiit audio products is getting to be expensive, even at the bargain prices.
However, my experience heretofore with Schiit has be quite good (Joty balanced), and the prices are quite good, so I decided to try the Vidar. Well, out of the box it was clear that it was quick and powerful, front-row, but (to me) not very musical and not something I wanted to listen to. After 24 hours of burn-in, I still did not want to listen to it. (Fortunately I have other equipment in a different room.) After two days I had some hope. After three days: this thing is a jewel!
If $700 strains you budget and you can find an Adcom 535 II used at a nice price, that would be a good choice. If $700 fits your budget, grab the Vidar!
Google only showed these...I found much better picture on schiity leaks
Y split will double the load on output stage of Yggy as the impedence is in parallel is cut in half ,double the current, but I see 0 problem
When my Yggy arrives I will need to feed its balanced output to two different amplifiers. Is a device like the Emotive XBAL 1x2 a superior solution to a simple good quality Y-splitter XLR cable?
The first is thru which makes the second utterly nonsense.There is no reason why the Emotive XBAL should be any better than a well made Y-splitter. In fact, the Y-splitter should have a chance at being better as it cuts down on the number of connections made.
Do you use them at the same time?I use Y splitters with my Gumby; does increasing the load on the output stage have any really observable consequences?