I had this issue with the connectors. I also thought that the logo would face outwards and the pin inwards. The cable still worked but I realised something was wrong when I heard a familiar song and realised that the instruments were reversed on the soundstage. I then checked out a @twister6 review (free plug) to see how the cable was connected to the IEM in one of his Plussound pictures.
Just got my bluetooth cable last night, glad to see someone else with pretty much the same impressions. I'd add that I can basically only use 1 fairly low volume setting, which is still slightly too quiet. Anything louder will blow out my eardrums and anything softer is basically off. Looking forward to the firmware updates from plussound.
Been using it during work and at home, battery life seems to be pretty good, got 8 hours on a single charge one day. But the sound will randomly stutter every 30mins or so. This happens on both my phone(ldac) and macbook(aptx) with the device a foot or two away.
Been using it during work and at home, battery life seems to be pretty good, got 8 hours on a single charge one day. But the sound will randomly stutter every 30mins or so. This happens on both my phone(ldac) and macbook(aptx) with the device a foot or two away.
Thanks for the response! If a firmware is all it takes to eliminate the white noise then this would be one of the big advantage over others. Updatable module that fixes/improves usability and somewhat futureproof.
That said, there are a few points you could consider that i hope can be included in the next firmware update:
1) As mentioned, the beep when pairing is quite loud. Hopefully able to reduce the volume for pairing mode.
2) The steps for volume increase/decrease is quite big with the volume control module. In between 2 clicks, the volume went from quite soft to audibly louder. Hope there is another 1-2 steps in between for a gradual volume increase instead of a big jump.
3) I also noticed intermittent cut offs in connection. This happened when i had paired 2 devices (iphone & ak sp1000m) together. Both devices and my iPad were in close proximity with me. Would interference happen due to that?
Thanks for the response! If a firmware is all it takes to eliminate the white noise then this would be one of the big advantage over others. Updatable module that fixes/improves usability and somewhat futureproof.
That said, there are a few points you could consider that i hope can be included in the next firmware update:
1) As mentioned, the beep when pairing is quite loud. Hopefully able to reduce the volume for pairing mode.
2) The steps for volume increase/decrease is quite big with the volume control module. In between 2 clicks, the volume went from quite soft to audibly louder. Hope there is another 1-2 steps in between for a gradual volume increase instead of a big jump.
3) I also noticed intermittent cut offs in connection. This happened when i had paired 2 devices (iphone & ak sp1000m) together. Both devices and my iPad were in close proximity with me. Would interference happen due to that?
Appreciate the suggestions! The first firmware update will be aimed at improving performance based on feedback received thus far. #1 and #2 will be in our to-do list. For #3, there can be interference if multiple devices are in close range.
Just received new Plussound BT cable and working fine with Earsonics ES3’s. Here is order info:
Echo Series Custom Bluetooth Cable
(Copper (Type 6 Litz)) Connector : 2-Pin / 0.78mm / CIEM (JH Audio / 64 Audio / Noble / etc.)
Sleeving : Black
Left Connector Heatshrink : Black (Blue Logo)
Right Connector Heatshrink : Black (Red Logo)
Cable Style : Default (Module on the right side)
Slider : Aluminum (Black)
Comments:
1. Coverage distance is slightly better than my Lear and TRN BT cables
2. Sound overall is cleaner and clearer
3.Length of cable is just right for me not too long and not too short
I wanted to point out the very good follow up from PLUSSOUND (Christian) in adapting the X16 (Cu,Ag,Au) to the MySphere 3.2
Comparing to XLR stock cable the X16 brings a very audible improvement on the richness heared for example on the pianoforte left hand.
High quality components, recommended.
I wanted to point out the very good follow up from PLUSSOUND (Christian) in adapting the X16 (Cu,Ag,Au) to the MySphere 3.2
Comparing to XLR stock cable the X16 brings a very audible improvement on the richness heared for example on the pianoforte left hand.
High quality components, recommended.
I wanted to point out the very good follow up from PLUSSOUND (Christian) in adapting the X16 (Cu,Ag,Au) to the MySphere 3.2
Comparing to XLR stock cable the X16 brings a very audible improvement on the richness heared for example on the pianoforte left hand.
High quality components, recommended.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.