Good to know, I can now zero in on the size to get. Thanks!No changes in outer diameter. But why inverse? To increase the diameter of the output nozzle, Epros have that distinct Horn pofiled section that significantly impact the sound output. Better than the typical straight profiled sections found in all tips. The "sounding" result says it all...
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
The PENON official thread
- Thread starter Dsnuts
- Start date
I believe you have the 3DT too, right? Can you give a comparison?Penon Globe has landed! I initially thought it was meh. On first listen they were kinda dark sounding. I put them down, let the DAP play for a few hours. Well, surprise surprise. No, they're not dark. Not sure if the fit wasn't good the first time, but these sound fantastic now! Sound profile is reminiscent of the ISN H40; intimate whilst having that holographic vibe, encapsulating music throughout, thumpy midbass. Only difference probably would be the better depth and richer mids here on the Globe. It's too early to tell actually. I need to let these burn in for some more hours. Good thing the addictive vocals and nicely textured bass from Orb are still here. More sparkles up top make these better of course. This is a winner! More impressions soon.
ehjie
Headphoneus Supremus
- Joined
- Apr 7, 2009
- Posts
- 3,564
- Likes
- 6,470
You're welcome. i'm buying some stuff next month, i'm ordering maybe 2 more Epros. i'm getting the hang of fitting them properly and get a very decent seal...Good to know, I can now zero in on the size to get. Thanks!
Say, are the M size sufficient? Somehow the M size looks thinner even though the flange size is 12 mm.You're welcome. i'm buying some stuff next month, i'm ordering maybe 2 more Epros. i'm getting the hang of fitting them properly and get a very decent seal...
pr0b3r
Headphoneus Supremus
- Joined
- Mar 18, 2016
- Posts
- 1,501
- Likes
- 1,274
I believe you have the 3DT too, right? Can you give a comparison?
That's another person, not me. I don't have the 3DT unfortunately.
ehjie
Headphoneus Supremus
- Joined
- Apr 7, 2009
- Posts
- 3,564
- Likes
- 6,470
Sufficient - yes, Thin, yes they're not only thin, they're very soft, too. fixing them to the ear canals take some practice & memorising in the "correct" placement. They can only sit just outside the ear canals w/o deforming the inverted tips.Say, are the M size sufficient? Somehow the M size looks thinner even though the flange size is 12 mm.
In time, i managed to do just that...
Dang...so many familiar persons that I tend to jumble them up between different threads. My badThat's another person, not me. I don't have the 3DT unfortunately.
ehjie
Headphoneus Supremus
- Joined
- Apr 7, 2009
- Posts
- 3,564
- Likes
- 6,470
The size M as shown is @ 12, 12.3mm. @ most
Whilst the size S IS NO larger than 11mm.
(pls excuse the micro dust particles, that virtually cannot be seen thro' the naked eye)
... & this is what we're trying to achieve, the largest diameter possible nozzle extenion. Even the size S inverted Epros are larger to the stock large diameter SD ++!
Can you show me a pic of the M epro horn tips and a M spiral dots++ side by side? need to understand the width,and also the length of the stem if possible.... & this is what we're trying to achieve, the largest diameter possible nozzle extenion. Even the size S inverted Epros are larger to the stock large diameter SD ++!
ehjie
Headphoneus Supremus
- Joined
- Apr 7, 2009
- Posts
- 3,564
- Likes
- 6,470
Can you show me a pic of the M epro horn tips and a M spiral dots++ side by side? need to understand the width,and also the length of the stem if possible.
With the same photo but labeled
View from the side, the Epros got longer stem...
You're welcome. i'm buying some stuff next month, i'm ordering maybe 2 more Epros. i'm getting the hang of fitting them properly and get a very decent seal...
I haven’t had much luck with tips measuring 12mm or smaller, I find the fit iffy. Luckily in stock form the mediums are 12.3mm which is just about right.
I’m also getting some accessories from them next month
I wanted to see the Original epro horn, not inverted, to get an idea of the diameter...but anyway, this will do too. Thanks!With the same photo but labeled
View from the side, the Epros got longer stem...
ehjie
Headphoneus Supremus
- Joined
- Apr 7, 2009
- Posts
- 3,564
- Likes
- 6,470
the highlighted is the uninvertedI wanted to see the Original epro horn, not inverted, to get an idea of the diameter...but anyway, this will do too. Thanks!
This is M size uninverted?the highlighted is the uninverted
ehjie
Headphoneus Supremus
- Joined
- Apr 7, 2009
- Posts
- 3,564
- Likes
- 6,470
Size S bothThis is M size uninverted?
Users who are viewing this thread
Total: 48 (members: 22, guests: 26)