Knowledge Zenith (KZ) impressions thread
Nov 29, 2018 at 10:52 AM Post #38,731 of 64,162
That is a crazy small and funny shaped screw head. I don't have the bit for it, so I am gaing to stick with my ghetto solution: An old ZS3 cable wih one side plugged in reversed. It has straigh-in connector, so it is easy to reverse one plug. I know that I am violating the instructions in your signature @Slater , since the connectiors are "coded" :)


Yeah, it's a 5-sided security screw called a Pentalobe. It's similar to a 6-sided Torx screw, except with 5 points instead of 6.

Thanks Apple...
 
Nov 29, 2018 at 11:12 AM Post #38,732 of 64,162
My ZSN's arrived yesterday and all is good, in phase and sounding as great as the hype proclaimed
 
Nov 29, 2018 at 11:40 AM Post #38,734 of 64,162
I C it too. :relaxed:

Hoping my husband favorably responds to the occasional subtle hints dropped his way about the new Topping NX3s.
:blush: :pray:

Best of luck on that, as far as I can tell he's got a real keeper:thumbsup:Can't tell you how many of these NX1's I gave as gifts and all are still working according to the owners:grin:

Topping It.jpg


My apologies and not to upset the thread faithful:wink:

KZ Cables Oh Boy.JPG
 
Nov 29, 2018 at 11:45 AM Post #38,735 of 64,162
Till now, the best sound I've heard is from an over ear pair of headphones I have called Superlux HD668B. They sound amazing. But I've recently been working out, and I also need some earphones I can carry around while travelling, and the Superlux are open back, so that's a no go.

I was thinking of buying the KZ AS10s, along with the official KZ Bluetooth cable. I would mostly use the IEMs wired with my smartphone (OnePlus One) or on my computer, which drives my Superlux headphones very well, and I would put on the Bluetooth cable when I work out.

Now, the questions I have are:

  1. I know it's a weird comparison, but if anyone owns both the Superlux HD668B and the KZ AS10s, could you try to differentiate between their sound quality?

  2. What's the battery life of the Bluetooth cable like with these IEMs?

  3. The cable is sweatproof, but the earphones aren't, right? Is it safe to work out with them? The only working out I do is running, and my ears do get sweaty after a while. Would that damage the IEMs?

  4. Could you recommend something better in this budget? Whatever the site, it should have cheap shipping to India.
And, that's about it. Would appreciate any helpful advice. Have a cheerful day!
 
Nov 29, 2018 at 11:50 AM Post #38,736 of 64,162
Could be a silly question. Is there any sound difference with each different cables? Just curious to know. Great zsn collection :wink:
The cables you see pictured basically renders a more balanced signature to all 3 ZSN's. The default cables that came with the Cyan/Black and Black/Black (not pictured) are stored away for safe keeping. For me, the cables you see pictured (whether the light copper or clear silver) provide the best extended sub-bass, midrange, and extended hi-end details for the ZSN.
 
Last edited:
Nov 29, 2018 at 1:05 PM Post #38,737 of 64,162
Best of luck on that, as far as I can tell he's got a real keeper:thumbsup:Can't tell you how many of these NX1's I gave as gifts and all are still working according to the owners:grin:



My apologies and not to upset the thread faithful:wink:


That flat braided cable in the top photo is beautiful
 
Nov 29, 2018 at 1:07 PM Post #38,738 of 64,162
Best of luck on that, as far as I can tell he's got a real keeper:thumbsup:Can't tell you how many of these NX1's I gave as gifts and all are still working according to the owners:grin:



My apologies and not to upset the thread faithful:wink:


I bought a Topping NX1S and i like the sound coming from my mobile phone (2017 Huawei P9 Lite), paired with the ZST Pro.
By the way, what interconnect cable (male 3.5 to 3.5) do you recommend?
 
Last edited:
Nov 29, 2018 at 1:43 PM Post #38,739 of 64,162
I bought a Topping NX1S and i like the sound coming from my mobile phone (2017 Huawei P9 Lite), paired with the ZST Pro.
By the way, what interconnect cable (male 3.5 to 3.5) do you recommend?

The 1s is really sweet and such a nice form factor, I really like my NX2 as well, for IC cables I use this connector alot:

https://www.aliexpress.com/item/Fre...4.0&pvid=5276707c-7d73-4333-b3da-a9ee84f6d01d

I also have these but the Moon is very stiff, the second one is nice for the price and more pliable and the black and blue one may be too long for your application but all work well:wink: I'd not go longer than 55mm if possible and if you really need a short one I love the little black "Pig Tail" from JDS Labs for $4.99, works great when rigs are strapped together and are the same length units:thumbsup:

https://www.aliexpress.com/item/Fre...5.0&pvid=147836b3-f1c1-4f77-ad18-f6c68384cb4c

https://www.aliexpress.com/item/Fre...6.0&pvid=c74a7abe-58be-4ae0-999b-14d8dc758b0a

https://www.aliexpress.com/item/HIF...5.0&pvid=a345d2e2-1696-417b-b9d8-ad655264ea66

@Slater , now I remember buying that cable from NiceHCK back in March of last year, his current iteration of it is here:

https://www.aliexpress.com/item/NIC...4.0&pvid=e70e199e-5266-4b30-8278-3731c94f50e4

Here's the one I call the Pig Tail from JDS Labs:grin:

A Little Blues.JPG
 
Nov 29, 2018 at 1:44 PM Post #38,740 of 64,162
Just to get an idea about Your two input about IT01 vs. ZSN:
1) What tips are You using with IT01?
2) What is Your source gear and amping with both IEMs?
3) What tips are You using with ZSN?
4) How much playtime has Your IT01 had?

After about 150-200h playtime my IT01 didn`t sound slightly boomy (which I also thought at beginning) and ultra-wide-bore silicone tips improve sound noticeably.
If You still find IT01 somewhat "boomy", then I recommend littlebit amping (they can take a lot of power).

But it`s good to know that KZ has achieved such good sound for so little money (especially compared against IT01) ;P
I hope I get my 2 ZSN`s soon and hear what they can do against modded IT01.

1. newbee foams on both
2. I am using trn bt3 on both mostly or using my pc with cavalli liquid carbon v1
3. same newbee foam
4. about 100 hours or so, maybe I should give it more playing time as it is my substitute if my trn bt3 for ZSN ran out of battery

maybe I should rephrase myself when saying it01 boomy, but it is more bassy than ZSN when I do my comparison. Both sounds good and has different sound presentation.
 
Nov 29, 2018 at 2:09 PM Post #38,741 of 64,162
That flat braided cable in the top photo is beautiful

So I found my original order page for that gray cable and it's only a 8 core compared to the new 16 but it's a really nice cable and I wish they could still get it:disappointed:

https://www.aliexpress.com/snapshot...&orderId=82909618523424&productId=32763788227

Speaking of nice cables and the Pig Tail again this sweet cable will set you back a penny or two:scream:

A4 Walnuts.JPG


To be honest I always thought the KZ Tr-Braid cable was based off that gray one:rolling_eyes:

AK Super Jr.JPG


Had to also get a KZ back into the mix here:stuck_out_tongue_winking_eye:
 
Nov 29, 2018 at 4:33 PM Post #38,743 of 64,162
Should I cancel my ZS10 order? I already have ZSN and AS10 coming and own EDR1, ZS3, ZST, ES4, ED16, ED7 (I think)... etc.

Imho.
The AS10 is quite analytical compared to the ZS10, if it's a badly encoded track or simply a badly produced track you hear it.
My ZS10 I find to be more forgiving and musical and still very enjoyable to listen to, with a slightly bloated bass
But, I love the placement, soundstage and clear bass that the AS10 gives you, albeit tonally slightly brighter than the ZS10.

If you can afford both...get them. I cant, but glad I got both.
 
Nov 29, 2018 at 4:54 PM Post #38,744 of 64,162
ZTE Axon (the glass is cracked, but everything works perfectly) and KZ ZSN with New Bee silicone tips.I take my chi-fi seriously.
IMG_20181129_125154_643.jpg

the ZSN look and feel so much more premium than their actual cost.

47217928_10215164815847949_3493331114993385472_o.jpg
 
Last edited:
Nov 29, 2018 at 4:54 PM Post #38,745 of 64,162
The AS10 is quite analytical compared to the ZS10, if it's a badly encoded track or simply a badly produced track you hear it.
My ZS10 I find to be more forgiving and musical and still very enjoyable to listen to, with a slightly bloated bass
But, I love the placement, soundstage and clear bass that the AS10 gives you, albeit tonally slightly brighter than the ZS10.

If you can afford both...get them. I cant, but glad I got both.
I told Penon Audio to cancel my ZS10 order already. Oh well, maybe he has done so.

I must have made the order as a guest cause I can't see it in my account so can't message him there canceling my request to cancel. I'll try e-mail.

PS: He e-mailed me about the cancel so I assume it's done. I will wait till the next AE sale to get one again. I don't care about waiting longer to hear it.
 
Last edited:

Users who are viewing this thread

Back
Top