You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
iBasso DX300 Qualcomm Snapdragon 660 Octa-core 6GB RAM ******NEW Firmware 2.00 Android 11******
- Thread starter Paul - iBasso
- Start date
It's okay, I have a set like that too. Did the Amp card come with one?@whitiger help!
I have one of these sets
its a small starry one ( i suck
Cheers and Thanks!
-HK sends
It was naked, alone and powerful. Looking for something to cover its delicates.It's okay, I have a set like that too. Did the Amp card come with one?
Cheers and Thanks!
-HK sends
like The Terminator...
*Probably a screwdriver will come with the official amp module releases - ala DX200, DX150, DX220.
Last edited:
- Joined
- Oct 14, 2013
- Posts
- 28,353
- Likes
- 32,192
Yes, that is the one. You can buy a set as @ExpatinJapan to make sure you got it covered.I can't read it well, is that a CRV T4 Torx? Thanks in advance!
Cheers!
-HK sends
the amp module comes as is with the bottom chassis attached, and spare screws, but no driver! You better make sure to state the color of your Dx300amp to get sent the right color. In the event where you got sent a different bottom chassis, you can easily unscrew the one you currently have, and lifting the 3.5mm connection then pull it out and replace
Thanks for the info, and I did specify the color. It's on the way!Yes, that is the one. You can buy a set as @ExpatinJapan to make sure you got it covered.
the amp module comes as is with the bottom chassis attached, and spare screws, but no driver! You better make sure to state the color of your Dx300amp to get sent the right color. In the event where you got sent a different bottom chassis, you can easily unscrew the one you currently have, and lifting the 3.5mm connection then pull it out and replace
Cheers and All the Best!
-HK sends
FooFighter
Headphoneus Supremus
Am joining team DX300 again
Have just ordered DX300 in black from local distributor
Have just ordered DX300 in black from local distributor
I'm also considering joining in. The DX300 looks like a great investment especially with the new LO board on the way. Love the large display and will also match up nicely in sound and size with my C9. Would love to see and hear the comparisons with the N6ii with A02 for myself. Roll on payday!
You are listening to music with your DX300 as you are working at your computer and want to control your DX300 from your computer with mouse and keyboard without having to fiddle with the screen of your DAP? Then there is scrcpy:
Last edited:
That is slick. Thanks for the pro tip @DarginMahkum!You are listening to music with your DX300 as you are working at your computer and want to control your DX300 from your computer with mouse and keyboard without having to fiddle with the screen of your DAP? Then there is scrcpy:
You're welcome. I haven't tried it on Windows or Mac but I hope it works without any issues.That is slick. Thanks for the pro tip @DarginMahkum!
I will pull that repo and do some sciencing when time permits. That is cool and I wasn't even aware it existed before your post.You're welcome. I haven't tried it on Windows or Mac but I hope it works without any issues.
xand
500+ Head-Fier
- Joined
- Mar 1, 2004
- Posts
- 909
- Likes
- 650
@Paul - iBasso If it's not too late in the amp card with dedicated LO design process - would it be possible to set a preferred voltage level for the dedicated LO?
I think you should be aware that one obvious paring is with the Cayin C9, and that seems to accept up to a 6V line input ...
Also if you could publish the specifications for voltage in L/M/H LO mode for AMP 11 that would be great too!
I think you should be aware that one obvious paring is with the Cayin C9, and that seems to accept up to a 6V line input ...
Also if you could publish the specifications for voltage in L/M/H LO mode for AMP 11 that would be great too!
Last edited:
FooFighter
Headphoneus Supremus
@DarginMahkumI will pull that repo and do some sciencing when time permits. That is cool and I wasn't even aware it existed before your post.
Great suggestion!
Once my DX300 arrives next week I will try it on Mac.
Do I understand correctly that you connect DX300 via wifi and then remote control it?
Don't remember but I think DX300 cannot decode MQA in DAC mode, right?
So besides this being a wonderful remote control in general it can be a nice DAC alternative playing Tidal over UApp and remote control from your PC/Mac getting full 8x unfold better than in connected in DAC mode.
What's the resolution of the shared screen?
Same as DX300?
That'll be great.
I used it always over USB but according to here it should be possible also over the WIFI. I am not sure about the MQA, most probably not, maybe someone else knows better. Yes it is the same resolution and you can scale it.@DarginMahkum
Great suggestion!
Once my DX300 arrives next week I will try it on Mac.
Do I understand correctly that you connect DX300 via wifi and then remote control it?
Don't remember but I think DX300 cannot decode MQA in DAC mode, right?
So besides this being a wonderful remote control in general it can be a nice DAC alternative playing Tidal over UApp and remote control from your PC/Mac getting full 8x unfold better than in connected in DAC mode.
What's the resolution of the shared screen?
Same as DX300?
That'll be great.
WiseRooster
100+ Head-Fier
Don't know if I'm suggesting this to my brain but connected via USB C/B Input on the SONY ZH1ES it seems next Level Resolution and signature with DENON 9200 & Black Dragon.
Really Brainshaking
Really Brainshaking
Users who are viewing this thread
Total: 9 (members: 0, guests: 9)