BadgerMcBadger
Head-Fier
will beeswax work for dipping?
Sorta. i dont think beeswax will dry to hardshell. I could be wrongwill beeswax work for dipping?
When I say slowly must also not go like a snail I said slowly not to say to remove it very quickly at once, the videos do not miss to see the good executionI tried slowly removing the impressions from the wax for a REALLY long time. It always made rings.
I had to just experiment with temperatures to find the right degree that I could naturally remove it without a problem.When I say slowly must also not go like a snail I said slowly not to say to remove it very quickly at once, the videos do not miss to see the good execution
I’ve never had a problem with this method.
Now this is nice... Do these two driver share tube or are in different lenghts?
I have made 2 of above for tunning 4 set of drivers in series and parallel instantly, its really saving a lot of efforts and times to set the driver to the desire FR, I'm late , I know lot of DIYers' in here have this already.
I'm now playing around the Sonion e50dt with Knowles 31736. The above is the combine FR of Sonion e50dt with Knowles 31736.
Below is e50dt FR in green and the orange is 31736. e50dt have a dip at 6.5k. I use the peak of 31736 at 6k to 8k to fill up the dip at 6.5K, shorter tube lenght of 31736 will move the peak to the right.
No, not share tube. e50dt use longer and 31736 use shorter tube length.Now this is nice... Do these two driver share tube or are in different lenghts?
I just ordered 10 pcs of RAU-34832 , no stock for RDU. Hope to be received on coming Sunday.Has anyone tried Knowles RDU? Seems to be a dual version of RAU. Would two RAUs be beneficial or is one good enough?
I have. Great drivers, but hard to tune tho. Dual has higher output, different impedance, and lower THD but the overall sound is similar.Has anyone tried Knowles RDU? Seems to be a dual version of RAU. Would two RAUs be beneficial or is one good enough?
Stay updated on Craft Ears at their sponsor profile on Head-Fi.
|