[Shilohsjustice]

Here is a fun one for ya, finished nice single driver reshell. Small ears, this will be the tiniest pair I've done.

 

[raptor18]

To those of you who have the ed-29689. How do you get enough highs? I have the two tap version (mine doesn't have half coil possibilites). 
For you who have the ed-29689, have you tried to wire it half coil to get better highs in a multi BA system?

 

[piotrus-g]

If anyone's interested ESC210C30017 versus original TWFK30017
(IEC-60318-4 into 16mmx2mmID no damping)

I think it's pretty close, at least on the graph. I have no idea how it sounds or how the tweeter will behave if there's cap wired to it.

 

[MuZo2]

They have same names like knowles drivers, so they also have 29689

 

[Xymordos]

Wow, they also have some self designed drivers too. I wonder how they sound.

 

[cyph3r]

Hi all, 
 
I am on DIY IEM project and wondering what type of wire (material? AWG? coating?) to use inside the shell to solder BA and connectors / xovers? 

 

[ForceMajeure]

  Hi all, 
 
I am on DIY IEM project and wondering what type of wire (material? AWG? coating?) to use inside the shell to solder BA and connectors / xovers? 

You can use some spare cable from earpohnes /buds/ IEM that don't work anymore, slice them gently and use the wires from inside. Usually those wires are colored green red and brown/copper and have a thin protective layer of coating to prevent shorting. So after you cut them to the right lengths make sure when you solder them to melt the thin shielding coat.
 
Another option is to buy Estron wires (good quality but expensive) or precut wires from taobao/aliexpress.

 

[Shilohsjustice]

Finished another set today. Another UE900 reshell!







The yellow case is a pelican 1010.

 

[4ren]

Hey guys,
I need your expertise! I've got a pair of non-detachable Vsonic vsd3 that have a connection issue at the base of the ear piece housing.
 
Making the switch from wired to detachable would be a good investment. I plan to dremmel, then epoxy in a 2 pin socket, and ideally have the connection look somewhat like the pair of modded westone 4r below.
from BTG-audio
I'm not sure what kind of options i have regarding the female sockets + cable combinations. Any recommendations?
 
Thanks so much.

 

[MuZo2]

There are 2 popular options, mmcx and two pin connectors. You can find cables and connectors. I did similar thing with mmcx for westone4.

 

[MuZo2]

Finished another set today. Another UE900 reshell!
 

Nice work again, you are an expert now. Going professional ?

 

[CoiL]

Not CIEM or any molding nor fully-home-made... but... haven`t posted here about my wooden mods I think (sorry if I have):
 
Yinjw WOM-mod:

Spoiler: Pics

VE Monk NUN-mod:

Spoiler: Pics

KZ ATE FF-mod:

Spoiler: Pics

KZ EDR2 RBW-mod:

Spoiler: Pic

KZ ED9 mod:

Spoiler: Pics

KZ ANV mod:

Spoiler: Pics

 
Who knows, maybe one day going to try to make wooden CIEM ;D

 

[MuZo2]

Very impressive work, I have seen those on other threads, wanted to ask you are they hand made?

 

[CoiL]

Yes, handmade by myself (wooden parts and some metal parts) using some special tools and long-time wood-tinkering skills 

Next mods are probably going to be done to HLSX808, VE M+, VE Asura2.
 
Actually I`m getting interested in trying to make one DD+2BA woodie - any recommendations what drivers combination to use for beginner in DD+2BA setups?

 

[Xymordos]

Oh my god they're beautiful! Did they sound better after the mod?