[Cutty]

What dampers would make the ED sound neutralish and analytical?

 

[tomekk]

  Would you recommend a single ED or BK for making a single BA universal?

 
Each driver is best to do the first project 

 
 

  What dampers would make the ED sound neutralish and analytical?

 
No dampers.  or try white.

 

[Xymordos]

Depends on which ED you use, and no dampers on it probably wouldn't sound too good...

 

[Xymordos]

  Well the 30120 would appear to be one.

 
Just realized this has no center tap, was hoping to test out a config I had in mind using the center tap  

 

[Shilohsjustice]

I'm cooking up some investments in the kitchen tonight, I'm off tomorrow and plan on building all day long. I just got some fresh Krystaloid today and I'm excited !!

 

[piotrus-g]

Just realized this has no center tap, was hoping to test out a config I had in mind using the center tap  

i feel you my friend. I already asked KA but there's no 3tap version of this driver.

 

[Xymordos]

i feel you my friend. I already asked KA but there's no 3tap version of this driver.

 
Darn. I tried the center tap of the 22955 but it doesn't seem to work too well. I guess I'll have to settle with fiddling around with the 22955 then

 

[piotrus-g]

   
Darn. I tried the center tap of the 22955 but it doesn't seem to work too well. I guess I'll have to settle with fiddling around with the 22955 then

How do you mean? CI via center tap sounds virtually the same, you just decrease its impedance

 

[Xymordos]

 
How do you mean? CI via center tap sounds virtually the same, you just decrease its impedance

 
Was trying to do a similar config to the UERM, using 2 CI22955 through center taps, but as a universal the bass is too tight. I was able to adjust this using 1 CI22955 but with 2, it was more difficult. 

 

[Squirg]

  Can you add 30120 to GK-31732-000?

I added a CI-30120 to a GK and it is deffinately a "warm" sound !  All I did was solder 30120 leads (same polarity) to the GK an added a 4400 ohm damper.  I little muddy but totally works...

 

[UNOE]

 
Can you add 30120 to GK-31732-000?

I added a CI-30120 to a GK and it is deffinately a "warm" sound !  All I did was solder 30120 leads (same polarity) to the GK an added a 4400 ohm damper.  I little muddy but totally works...

Your using 4400 on CI? What dampers are you using on the GK highs and lows. I might build just what you recommended here if you say it improves the GK lows, but remains clear.

 

[piotrus-g]

  I added a CI-30120 to a GK and it is deffinately a "warm" sound !  All I did was solder 30120 leads (same polarity) to the GK an added a 4400 ohm damper.  I little muddy but totally works...

Cool! Add some resistor to fix muddiness. 30120 is only 16 ohms.

 

[UNOE]

Can you all help me with a recipe this will be my first build I want to use theses 2 together. I don't know what dampers to use or resisters.

 

[UNOE]

 

  I added a CI-30120 to a GK and it is deffinately a "warm" sound !  All I did was solder 30120 leads (same polarity) to the GK an added a 4400 ohm damper.  I little muddy but totally works...

Cool! Add some resistor to fix muddiness. 30120 is only 16 ohms.

What resistor would you recommend?

 

[piotrus-g]

What resistor would you recommend?

10-20 Ohm should be enough