any suggestions on a streamer for the holo audio stack?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Holo Audio Bliss
- Thread starter Rayon
- Start date
FOUNDERZERO
100+ Head-Fier
HoloAudio Redany suggestions on a streamer for the holo audio stack?
I bought the Bliss KTE. is it suggested I pair it with the Spring KTE? I was otherwise going to use a DMP a6
I have all three though currently the a6 is going into a two channel system via usb. I'll likely eventually move it to feed the Spring 3 KTE w/preamp and Bliss KTE for headphones.I bought the Bliss KTE. is it suggested I pair it with the Spring KTE? I was otherwise going to use a DMP a6
The Eversolo has been a great streamer especially for playing local files via the internal ssd and as a Roon endpoint. However, don't foresee it as a replacement for a good standalone dac although I haven't actually tested that either.
It was suggested that I consider a streamer with I2S like the Matrix Element S over the Eversolo.
I almost always stream music and don’t have much of my own I play using a NAS or SD card.
what are you using to feed the Spring KTE
I almost always stream music and don’t have much of my own I play using a NAS or SD card.
what are you using to feed the Spring KTE
I have all three though currently the a6 is going into a two channel system via usb. I'll likely eventually move it to feed the Spring 3 KTE w/preamp and Bliss KTE for headphones.
The Eversolo has been a great streamer especially for playing local files via the internal ssd and as a Roon endpoint. However, don't foresee it as a replacement for a good standalone dac although I haven't actually tested that either.
I would like to put one Holo Unit above the other having orders the Bliss and Spring 3.
which one can go on top and what is suggested to use for isolation between them?
and if I also want to put the DMP A6 on top what is suggested? thanks so much.
which one can go on top and what is suggested to use for isolation between them?
and if I also want to put the DMP A6 on top what is suggested? thanks so much.
https://www.head-fi.org/threads/holo-audio-bliss.964155/page-185#post-17704939I would like to put one Holo Unit above the other having orders the Bliss and Spring 3.
which one can go on top and what is suggested to use for isolation between them?
and if I also want to put the DMP A6 on top what is suggested? thanks so much.
thanks. Putting them side by side is not feasible + any suggestions on a rack which could go on a desk or would the below work?
I was checking out the isoacoustics OREA Bronze - 8 pounds (3.6 KG) / 2" x 1.1" (50 x 29mm) per isolator
it's 2" in height
They're actually 2" W x 1.1" H (50mm x 29mm)OREA Bronze - 8 pounds (3.6 KG) / 2" x 1.1" (50 x 29mm) per isolator
it's 2" in height
Hate for you to spend your money and find out after the fact.
Last edited:
any thoughts on which isolation feet to increase the height I should buy?
damascato
Member of the Trade: Marco Custom Cables
- Joined
- Dec 3, 2011
- Posts
- 569
- Likes
- 670
Isoplucks. The cheap ones.any thoughts on which isolation feet to increase the height I should buy?
I am consider
Yes, the new Lavri silvers replaced those. The TWL are fantastic cable. When you get to this level, it's just a matter of what flavor you want.
what rack is that?I like it! The colour matches almost perfectly lol, I think even if you didn't have issues with volume knob the pop of colour there increases the aesthetics which we all know is very important and indirectly improves sound
Since the usb on the Spring 3 kte is supposed to be excellent based on data compiled by Goldensound and others, I have just been using my pc with roon connected via usb to the Spring. Sounds great to my ears but never tested and compared alternative setups.It was suggested that I consider a streamer with I2S like the Matrix Element S over the Eversolo.
I almost always stream music and don’t have much of my own I play using a NAS or SD card.
what are you using to feed the Spring KTE
Even on separate shelves within a rack, both the Bliss and Spring 3 w/preamp stay pretty warm to hot in my apartment, which averages around 26-28 degrees these days. Therefore, got a separate fan (Vornado Pivot3c), which stays on 24/7 pointed at both - super cool now...I would like to put one Holo Unit above the other having orders the Bliss and Spring 3.
which one can go on top and what is suggested to use for isolation between them?
and if I also want to put the DMP A6 on top what is suggested? thanks so much.
Users who are viewing this thread
Total: 27 (members: 8, guests: 19)