purplegoat
100+ Head-Fier
- Joined
- Apr 26, 2014
- Posts
- 133
- Likes
- 13
Hopefully people will chime in beyond this but my experience has been with a HE-adapter that was modified by another HeadFier with a 10ohm Mills and a 27ohm Takman. It's my understanding that the big ones are the 10 ohm and the small ones are the 25ohm by default. Somehow (and here's where it gets beyond my knowledge) the 10 and 27 ohm resistors make a circuit and I think create a resistance lower than 10 ohms? That I'm not sure about.
I would imagine if you want to make it bare you would just take the resistors out and solder the wire each input to each output. I've heard that having better resistors in there allows it to not degrade the SQ and that the stock resistors do degrade the SQ, but I have never tried the stock ones.
I would imagine if you want to make it bare you would just take the resistors out and solder the wire each input to each output. I've heard that having better resistors in there allows it to not degrade the SQ and that the stock resistors do degrade the SQ, but I have never tried the stock ones.