For sure one will pop upThanks, but just want to make an European Deal.
I ordered mine yesterday
Considered many others but finally that's what I had in mind
And have the C9 here already
For sure one will pop upThanks, but just want to make an European Deal.
Hello Joe,I can't generate the exact same filter without their data, but these look like the slow psychoacoustic / slow minphase and slow symmetric filters
Usually when rated, they are per channelIs the max power output of 690mw total for both channels or per channel?
Thanks!
Would be the FPGAHello Joe,
May I know if these custom Fir filters are handling by the SOC or the FPGA ? Thanks
Stay updated on HiBy at their facebook, website or email (icons below).
Stay updated on HiBy at their sponsor profile on Head-Fi.
|
Thank you! Is this FPGA implemented similarly on the R8 ? Or under a very different roleWould be the FPGA
Well the RS6 was the first R player with the Darwin architecture. The Darwin architecture is not specific to R2R and being able to use uploaded FIR filters was one of the new features of this architecture over anything before it including the R8.Thank you! Is this FPGA implemented similarly on the R8 ? Or under a very different role
Stay updated on HiBy at their facebook, website or email (icons below).
Stay updated on HiBy at their sponsor profile on Head-Fi.
|
Thank you! The reason I asked was because the R8 can also see this features as well, and I wonder if it would workWell the RS6 was the first R player with the Darwin architecture. The Darwin architecture is not specific to R2R and being able to use uploaded FIR filters was one of the new features of this architecture over anything before it including the R8.
Sorry what do you mean "can also see this feature"?Thank you! The reason I asked was because the R8 can also see this features as well, and I wonder if it would work
Stay updated on HiBy at their facebook, website or email (icons below).
Stay updated on HiBy at their sponsor profile on Head-Fi.
|
I mean would this feature work in the R8 as you mentioned that Darwin is not specific to R2R, with FPGA built in by the R8 as well. If it does , would the R8 see this feature?Sorry what do you mean "can also see this feature"?
I see. No, as far as I know the R8 would be limited to the low pass filters available as part of its built in DACI mean would this feature work in the R8 as you mentioned that Darwin is not specific to R2R, with FPGA built in by the R8 as well. If it does , would the R8 see this feature?
Stay updated on HiBy at their facebook, website or email (icons below).
Stay updated on HiBy at their sponsor profile on Head-Fi.
|
Thank you. I thought AK4497EQ can also take external LPF as well, but I understand. That is too bad. Thanks for the confirmationsI see. No, as far as I know the R8 would be limited to the low pass filters available as part of its built in DAC
Well, anything is possible. You can conceivably upsample everything to 768kHz and apply lowpass in software on everything before sending it to the DAC. But the thing is, the AK4497EQ has its own built-in post-decoding LPF of which you can choose between a few, but in any case you would be doubling up LPFs in this theoretical case.Thank you. I thought AK4497EQ can also take external LPF as well, but I understand. That is too bad. Thanks for the confirmations
Stay updated on HiBy at their facebook, website or email (icons below).
Stay updated on HiBy at their sponsor profile on Head-Fi.
|
Got it! Now I understand. Thank you so much for your detailed answerWell, anything is possible. You can conceivably upsample everything to 768kHz and apply lowpass in software on everything before sending it to the DAC. But the thing is, the AK4497EQ has its own built-in post-decoding LPF of which you can choose between a few, but in any case you would be doubling up LPFs in this theoretical case.