Great headphone sound? It’s in the CAN! iFi audio ZEN CAN!
Jul 27, 2020 at 6:33 PM Thread Starter Post #1 of 483
Joined
Mar 20, 2013
Posts
12,880
Likes
8,433
Location
Location: HQ in the UK, but spread far and wide.
Is it possible to make an analogue headphone amp that delivers high-end performance with all manner of headphones and bring it to every music lover at £149? If anyone can, iFi CAN!

Southport, England – In just a few short months, iFi’s first ZEN Series products – the ZEN Blue and ZEN DAC – have established themselves as undisputed champs in the sub-£200 desktop DAC category, making high-performance audio more accessible than ever. Now, iFi expands this award-winning range with the ZEN CAN – an all-analogue headphone amplifier in the same compact aluminium chassis and offering the same exceptional value-for-money.

image.jpg


With an RRP of just £149 (US$149, €165), the ZEN CAN sports many features usually reserved for high-end headphone amps at many times the price. The ability to drive tough headphone loads, the balanced circuit design, the vanishingly low levels of distortion and versatile sonic tailoring options to optimise performance are all highly unusual at such an eminently affordable price tag. By combining them in one package, iFi is once again pushing the envelope of affordable desktop audio.

As an all-analogue headphone amp, the ZEN CAN has no digital input of any kind, USB or otherwise. It connects to any audio source with an analogue output, such as the headphone output from a DAP (Digital Audio Player), a laptop, a tablet or a smartphone, or the RCA outputs from, say, a CD player or phono stage. It could be paired with the ZEN Blue to add Bluetooth reception, or combined with the ZEN DAC to upgrade the DAC’s headphone amp stage. As well as a headphone amp, it can double as a preamp to feed a power amp and speakers or a pair of active speakers.

Making the most of all kinds of cans

In common with the other ZEN Series products, the ZEN CAN sports a sturdy, smartly finished aluminium enclosure, neatly sized at 158x35x100mm (WxHxD). In the centre of the front panel is a smooth-acting rotary volume control, flanked by a range of sockets and buttons. On the left, beside the power button and input switch, resides a control for selecting the appropriate gain. Four settings in six dB steps – 0dB, 6dB, 12dB and 18db – enable the amp to precisely suit the connected headphones; unity gain (0dB) is useful to ensure low noise with sensitive in-ear monitors, while the higher gain settings make the most of tougher headphone loads, delivering excellent dynamic headroom.

1.jpg

To the left of the aluminium volume control are three buttons: power on/off, input selection and gain selection

To the right are a pair of headphone outputs – a 6.3mm output for headphones that have a standard single-ended connector (compatible with all headphones) and a 4.4 Pentaconn balanced output for headphones offering balanced connection. An increasing number of high-quality headphones and in-ear monitors either come so equipped or give the option of detaching the cable and upgrading to a 4.4mm Pentaconn connector, and this output makes the most of them (it is particularly recommended for high-impedance headphones).

Next to the headphone sockets is a button to engage the latest versions of iFi’s ‘XBass’ and ‘3D’ sonic tailoring options for headphones. XBass adjusts frequency response to enhance low frequency performance – particularly useful with open-back headphones that ‘leak’ deep bass. 3D compensates for the ‘in-head localisation’ effect that often occurs when using headphones to listen to music that was mixed using a pair of speakers, effectively widening the headphone soundstage to deliver a more speaker-like experience. Both XBass and 3D engage purely analogue processing and may be bypassed entirely if preferred.

2.jpg

On the right side of the front panel are 6.3mm single-ended and 4.4mm balanced headphone outputs, plus a button to engage XBass and 3D analogue processing

Around the back, the ZEN CAN offers stereo RCA and 3.5mm single-ended inputs, plus a balanced 4.4mm Pentaconn input. A 4.4mm balanced output is also provided, to connect to power amps and active speakers equipped with a balanced input – either a Pentaconn 4.4mm input, or XLR inputs via a 4.4mm-to-XLR cable. This balanced output can also be used for single-ended connection if no balanced input is available. All the ZEN CAN’s inputs and outputs are gold plated for optimal conductivity.

3.jpg


Circuit highlights: delivering the balance of power

The ZEN CAN’s circuitry is a balanced, symmetrical dual-mono design – a topology usually reserved for high-end headphone amps. Balanced circuits have long been championed by renowned high-end audio electronics engineer John Curl, now a technical consultant for iFi, given their ability to reduce noise within the signal path. Curl has worked closely with iFi’s in-house technical team, headed by Thorsten Loesch, to produce an analogue circuit of exceptional quality for a device of this kind.

A number of key elements have trickled down from the discrete Class A circuitry developed for iFi’s flagship headphone amplifier, the Pro iCAN, which at £1,799 is 12 times the price of the ZEN CAN. It offers prodigious drive capability for such a modestly priced headphone amp, delivering 1600mW (7.2V) into 32 ohms from the single-ended output, with 15V+ available to loads of 300 ohms or more through the balanced output, ensuring the ZEN DAC takes even current-hungry planar headphones in its stride.

4.jpg

Topside and underside of the ZEN CAN’s circuit board, revealing the discrete, balanced design

The ZEN CAN’s circuitry utilises many discrete, high-grade surface-mounted components to maximise sonic purity, such as TDK C0G and Panasonic ECPU capacitors, and ultra-low-distortion thin-film resistors. iFi’s custom OV4627 quad-amp stage features four independent FET op-amps using a ‘folded cascode’ design, with low-impedance feedback circuitry to optimise performance.

A further custom op-amp is used for the input stage, which features automatic level matching and feeds a TOCOS precision potentiometer, while the fully discrete, balanced, complementary bipolar output stage utilises the same Class A buffer found in the Pro iCAN. The power supply circuitry includes ‘stealth mode’ voltage conversion, again derived from the Pro iCAN, with linear regulation, noise filtering, physical isolation from sensitive audio circuits and 4,000uF capacitance to keep ample power in reserve to respond to musical transients.

Even the way the ZEN CAN switches between settings has been engineered to ensure sonic transparency. FET-based switching is handled by a microcontroller, which only ‘wakes up’ when the user changes a setting, thus eradicating any sonically deleterious interference.

All this painstaking attention to detail would be impressive in a high-end headphone amp; that fact that iFi has succeeded in implementing such high-quality circuitry in one retailing at just £149 (US$149, €165) is nothing short of remarkable. Rich detail, engaging dynamics and the ability to drive all manner of headphones with ease – the ZEN CAN further extends the reputation of iFi’s ZEN Series for delivering exceptional sound at entry-level prices.

5.jpg


The iFi ZEN CAN is available from selected retailers from tomorrow. The first 1000 units are bundled with iFi’s ultra-low noise ‘iPower’ AC/DC power adapter, which further enhances performance and costs £49 when purchased separately, at a special package price of £169 (US$169, €185). When these bundles have sold out, the ZEN CAN will be available with a standard AC/DC power adapter at £149 (US$149, €165).
 
Last edited:
iFi audio Stay updated on iFi audio at their sponsor profile on Head-Fi.
 
https://www.facebook.com/iFiAudio/ https://twitter.com/ifiaudio https://www.instagram.com/ifiaudio/ https://ifi-audio.com/ info@ifi-audio.com
Jul 28, 2020 at 5:26 PM Post #7 of 483

Lalerfy

100+ Head-Fier
Joined
Jan 8, 2020
Posts
127
Likes
95
Location
IRELAND
Your company with all it's experience - has the chance to make an Amp/Dac - so good - that no one will even bother recommending anything else.
But I'm afraid you will just make a crippled mediocre product - that's designed not compete in the same market share - as one of your other 6 year old products😔
Imagine the amount of $399 units that would sell - of a 2020 iFi Amp/Dac that way surpasses the "Micro Black Label" and sounds so good - it becomes the Go-To Hi-Fi benchmark for everybody. (Just look at the THX AAA 789)
 
Last edited:
Jul 29, 2020 at 1:02 AM Post #8 of 483

KaiFi

100+ Head-Fier
Joined
Jul 27, 2017
Posts
236
Likes
186
Location
California
Wonder if it'll be worth upgrading to from the Zen DAC... (I mean, unless it's just an amp and needs a DAC!)
 
Jul 30, 2020 at 5:24 PM Post #10 of 483
Joined
Mar 20, 2013
Posts
12,880
Likes
8,433
Location
Location: HQ in the UK, but spread far and wide.
Your company with all it's experience - has the chance to make an Amp/Dac - so good - that no one will even bother recommending anything else.
But I'm afraid you will just make a crippled mediocre product - that's designed not compete in the same market share - as one of your other 6 year old products😔

You worry too much :sunglasses:

If we release any product, there's always a reason why this happens, so we're all good as far as ZEN CAN's future goes :)
 
iFi audio Stay updated on iFi audio at their sponsor profile on Head-Fi.
 
https://www.facebook.com/iFiAudio/ https://twitter.com/ifiaudio https://www.instagram.com/ifiaudio/ https://ifi-audio.com/ info@ifi-audio.com
Jul 31, 2020 at 9:06 AM Post #11 of 483
Joined
Aug 13, 2017
Posts
356
Likes
762
Location
Bloom Audio
Bloom Audio Headphones and Personal Audio with Pitch Perfect Service. Stay updated on Bloom Audio at their sponsor profile on Head-Fi.
 
https://www.facebook.com/BloomAudioStore https://twitter.com/BloomAudioStore https://www.instagram.com/BloomAudioStore https://bloomaudio.com hello@bloomaudio.com
Jul 31, 2020 at 11:12 AM Post #12 of 483

Bazaar

100+ Head-Fier
Joined
Jul 6, 2020
Posts
212
Likes
143
Location
Boston
No mention of the Sennheisser-specific profile tuning? Reviewer obviously didn't test w/ any, but that seems to be one of the big attractions (while still appealing to non-Sennheisser users). Nice to see his enthusiasm tho'.
 
Jul 31, 2020 at 2:54 PM Post #14 of 483

Bazaar

100+ Head-Fier
Joined
Jul 6, 2020
Posts
212
Likes
143
Location
Boston
This is not the Zen Can 6XX from drop. Does not look like it has the Sennheiser EQ at all.
You're right... diff on the far right switch...Zen CAN 'XBass' & '3D', while the Drop version 'HD6xx' & 'XSpace'....gonna be interesting to read/hear about the differences.
 

Users who are viewing this thread

Top