- Joined
- Oct 10, 2002
- Posts
- 2,941
- Likes
- 1,422
Run a cable from the 3.5mm jack to the 3.5mm jack on the Carbon. This will connect the grounds of both boxes together and should solve any noise issues.
However, this also means that the 3.5mm output is going into the Carbon's SE input. this won't harm anything except that you won't be able to connect another source to the RCA jacks when things are wired this way.
An alternative is to contact WyWires for a cable that will connect the grounds, but not use up the SE input to do it.
However, this also means that the 3.5mm output is going into the Carbon's SE input. this won't harm anything except that you won't be able to connect another source to the RCA jacks when things are wired this way.
An alternative is to contact WyWires for a cable that will connect the grounds, but not use up the SE input to do it.