1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.

    Dismiss Notice

FiiO M9 , Android based Hi-Res smart DAP with 3.5/2.5 powerful output|AKM4490 X2 |WiFi|aptX/aptX HD/LDAC/HWA(LHDC)|USB DAC|USB AUDIO OUT

Discussion in 'Portable Source Gear' started by JamesFiiO, Aug 10, 2018.
First
 
Back
2 3 4 5 6 7 8 9 10 11
13 14 15 16 17 18 19 20 21 22
Next
 
Last
  1. kgs51
    In USD how much will the FiiO M9 cost and when will it be available in US. Thanks
     
  2. Soham Sengupta
  3. davidcotton
  4. Sven2015
    @FiiO
    Please tell me the difference between the M7 and M9. Thanks
     
  5. Music Enthusiast
    Hi Seanwee. As the Fiio M9 appears to uses the same DACs as the Shanling M3S - I'm curious if you happen to have heard the Shanling M3S and, if so, how it compares sound quality wise?
     
  6. seanwee
    It's been a while since I heard the M3S but I do believe that the M9 is better.

    The M3S is coloured while the M9 is more neutral. The M3S should also be darker sounding if I'm not mistaken.
     
  7. FiiO
    1. FiiO M9 Portable High-Resolution Audio Player丨The Ultimate in Versatility

    The two AK4490EN DACs employed in the M9 feature a high signal-to-noise ratio, exceptional dynamic range, and low distortion – making for a precise yet exciting sound signature.
    1 (1).jpg 1 (2).jpg 1 (3).jpg
     
    FiiO Stay updated on FiiO at their sponsor page on Head-Fi.
     
    https://www.facebook.com/FiiOAUDIO https://twitter.com/FiiO_official https://www.instagram.com/fiioofficial/ https://www.fiio.com http://fiio.udesk.cn/im_client/?web_plugin_id=24494&group_id=47899&language=en-us
  8. seanwee
    It actually looks even better in real life :)
     
  9. crabdog
    That is one beautiful device.:yum:
     
  10. Tsukuyomi
    Its physically very attractive for a DAP, however the specs are less than desired. the power output for both 3.5 and 2.5 are very weak. even my X5 III has more output power than the M9... :frowning2: sad, seems i wont be picking this DAP up after all.
     
  11. stenog
    I am not sure it's fair to look at it that way. The X5 has a lot of power for it's small size, if I don't remember wrong it has more power in SE than the X7II. But power output is not all :).

    And i would assume that the M9 is made for iems and easy to drive headphones on the go. And most importantly how is the sound quality? :)
     
    seanwee and zhubajie like this.
  12. seanwee
    If you want lots of driving power you may want to consider the Opus 1S.
     
  13. Oncisounds
    What's the power out of the new Fiio M9 are talking able to drive 150ohm headphones or more like 32ohm? I was looking at comparing this to the Pioneer XDP-300R and which was the better choice?
     
  14. FiiO
    2. FiiO M9 Portable High-Resolution Audio Player丨The Ultimate in Versatility

    The TI OPA1612 is used as the LPF, while the TI OPA1622 serves as the BUF. To achieve single-ended and balanced output, there are 2 OPA1622 op-amps used that provide up to 77mW of power @ 300Ω load.

    2 (1).jpg 2 (2).jpg 2 (3).jpg
     
    FiiO Stay updated on FiiO at their sponsor page on Head-Fi.
     
    https://www.facebook.com/FiiOAUDIO https://twitter.com/FiiO_official https://www.instagram.com/fiioofficial/ https://www.fiio.com http://fiio.udesk.cn/im_client/?web_plugin_id=24494&group_id=47899&language=en-us
    trellus likes this.
  15. Tsukuyomi
    Headphone out specifications 1(3.5mm port)
    Output power 1 ≥125mW(16Ω / THD+N<1%) Output impedance <2Ω
    Output power 2 ≥170mW(32Ω /THD+N<1%) THD+N <0.002%(1kHz/32Ω)
    Output power 3 ≥19mW(300Ω / THD+N<1%) Separation >72dB
    Frequency response 5Hz~80 kHz(-3dB) Peak output voltage 6.5Vp-p
    SNR ≥118dB (A-weighted) Noise floor <5uV
    Headphone out specifications 2(2.5mm port)
    Output power 1 ≥125mW(16Ω / THD+N<1%) Output impedance <2Ω
    Output power 2 ≥195mW(32Ω /THD+N<1%,balanced turbo off)
    ≥220mW(32Ω /THD+N<1%,balanced turbo on) THD+N <0.002%(1kHz/32Ω)
    Output power 3 ≥24mW(300Ω / THD+N<1%,balanced turbo off)
    ≥77mW(300Ω / THD+N<1%,balanced turbo on) Separation >98dB
    Frequency response 5Hz~80 kHz(-3dB) Peak output voltage 7.07Vp-p
    SNR ≥113dB (A-weighted) Noise floor <10uV
     
    trellus and stenog like this.
First
 
Back
2 3 4 5 6 7 8 9 10 11
13 14 15 16 17 18 19 20 21 22
Next
 
Last

Share This Page