[FiiO]

Is it possible to rename the 3 different custom EQ´s?

Dear friend,

We will report to the engineer again for assessing.

Best regards

 

[FiiO]

@FiiO Will you be able to add a 3rd option for the volume buttons? An Volume only mode with no tittle switching would be nice in my use case.

Dear friend,

You would prefer no switching songs function for volume buttons? And are you afraid of clicking by mistake?

Best regards

 

[FiiO]

Enjoy FiiO FH15+Q11+BTR7

 

[theElk]

Dear friend,

You would prefer no switching songs function for volume buttons? And are you afraid of clicking by mistake?

Best regards

I had that problem some times. Holding for Volume gets loud very fast if the IEM is very sensitive (SR5 as example)

 

[FiiO]

I had that problem some times. Holding for Volume gets loud very fast if the IEM is very sensitive (SR5 as example)

Dear friend,

What operation mode would you prefer for your case? Thank you for sharing.

Best regards

 

[dgnzcn]

Dear friend,

What operation mode would you prefer for your case? Thank you for sharing.

Best regards

Will there be new software for btr7 that includes parametric equalizer corrections similar to Qudelix - 5K?

btr7's parametric equalizer is very, very amateur compared to Qudelix - 5K.

 

[FiiO]

Will there be new software for btr7 that includes parametric equalizer corrections similar to Qudelix - 5K?

btr7's parametric equalizer is very, very amateur compared to Qudelix - 5K.

Dear friend,

No, but we are assessing for adding the High shelf and Low shelf for BTR7.

Best regards

 

[anmolkakkar]

@FiiO Reporting a bug (if not already reported previously). The 3rd Custom EQ has a spelling mistake as it says "USE3" instead of "USER3".

Also, wanted to raise 3 feature requests (if possible)
1. To enable "Battery Saver" mode as the battery life is pretty short in the PCM mode.

2. To enable "Battery Percentage" as the current gauge is very unreliable as to how much battery is left. (My majority of the use-case is using C-to-C cable with my smartphone and not using FiiO app. I don't want to rely on an app that gives battery percentages that too in mere 20% increments, which is not helpful at all; Hence the request/ask). Imagine, I have to disconnect first, sync it via Bluetooth, open the app, check the battery (which is very unrealistic in the first place) and then plug everything back. Not a good user experience. Hope it helps explains why everyone is asking for this feature for quite a long time.

3. When an EQ is applied/ON, it might be good to see some notification at the top notification bar indicating that an EQ is applied.

I hope these are not too difficult to develop or unrealistic. Would request you to atleast share with Engg and check if they can develop it. Appreciate it. Thanks!

 

[FiiO]

@FiiO Reporting a bug (if not already reported previously). The 3rd Custom EQ has a spelling mistake as it says "USE3" instead of "USER3".


Also, wanted to raise 3 feature requests (if possible)
1. To enable "Battery Saver" mode as the battery life is pretty short in the PCM mode.

2. To enable "Battery Percentage" as the current gauge is very unreliable as to how much battery is left. (My majority of the use-case is using C-to-C cable with my smartphone and not using FiiO app. I don't want to rely on an app that gives battery percentages that too in mere 20% increments, which is not helpful at all; Hence the request/ask). Imagine, I have to disconnect first, sync it via Bluetooth, open the app, check the battery (which is very unrealistic in the first place) and then plug everything back. Not a good user experience. Hope it helps explains why everyone is asking for this feature for quite a long time.

3. When an EQ is applied/ON, it might be good to see some notification at the top notification bar indicating that an EQ is applied.

I hope these are not too difficult to develop or unrealistic. Would request you to atleast share with Engg and check if they can develop it. Appreciate it. Thanks!

Dear friend,

Thanks for your kind feedback.
1. What 'Battery saver' mode would you prefer?
2. We have reported this to the engineer. But they are still assessing since the percentage accuracy could not meet our requirement currently.
3. We will report to the engineer for check as well.

Best regards

 

[rael67]

Hello,
I got my FiiO BTR7 today and I use it with my iMac. In the Audio-MIDI-Setup I have 22 possibilities to choose (see Picture). But how can I get the right setting, for example, when I play a 24bit/192kHz song?

 

[rlw6534]

Hello,
I got my FiiO BTR7 today and I use it with my iMac. In the Audio-MIDI-Setup I have 22 possibilities to choose (see Picture). But how can I get the right setting, for example, when I play a 24bit/192kHz song?

Use 32/192...

 

[TooPoorForHiFi]

@FiiO

Does the BTR7 have this feature(Like Qudelix5K) where you enter in the Spec of the IEM / Headphone, The App Displays how Loud (dB) you're currently Listening at?

I think this is a very useful / beneficial Tool to Have.

 

[FiiO]

@FiiO

Does the BTR7 have this feature(Like Qudelix5K) where you enter in the Spec of the IEM / Headphone, The App Displays how Loud (dB) you're currently Listening at?

I think this is a very useful / beneficial Tool to Have.

Dear friend,

It does't have this feature. We will report to the engineer for assessing first.

Best regards

 

[rael67]

The audio format is not displayed correctly when used as a USB DAC on the iPhone 13. Instead of 16Bit or 24Bit, 32Bit is always displayed. The kHz number is given correctly. I have already tried various cables and factory resets. Software version is V 1.88. For Input Priority, UAC is selected.

 

[jsmiller58]

The audio format is not displayed correctly when used as a USB DAC on the iPhone 13. Instead of 16Bit or 24Bit, 32Bit is always displayed. The kHz number is given correctly. I have already tried various cables and factory resets. Software version is V 1.88. For Input Priority, UAC is selected.

I wonder if it is displaying 32-bit because it is padding the remaining bits with 0s… This is a practice among some DACs and does not change the sound in any way. If I’m right it is not a bug, rather a design decision with no negative effects.