My left earbud sounds like it’s got a low pass filter on it, it’s definitely lost a little brightness compared to the right earbudI'm having the same issue but for me it is the right earbud with lower volume (and perhaps recessed mids). This is my second pair (first pair was replaced under warranty when the left earbud quit working). Not sure how the warranty works with replacements. I bought directly from Sennheiser, so I will try an RMA (again).
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Exceptional in Every Detail: Say Hello to the IE 600
- Thread starter Sennheiser
- Start date
What's going on with people having one ear piece losing sound or sounding different to the other ear piece? A dynamic driver can't seem to fail so easily. Or maybe it's a problem with the connector.
opis
Head-Fier
- Joined
- Mar 9, 2014
- Posts
- 60
- Likes
- 23
So I bought the Tripowin Noire (4 core) cable for these.
It just about fits, I had to file down the prodtruding rings ever so slightly, especially on the red connector to really make it "click" in, I have read others who said theirs fit perfectly so it might just be down to the absolute details of the manufacturing, it is fractions of a millimeter after all. Everything good otherwise, so can recommend if you're willing to possibly file/chip the rings down just a tad if you have to.
It just about fits, I had to file down the prodtruding rings ever so slightly, especially on the red connector to really make it "click" in, I have read others who said theirs fit perfectly so it might just be down to the absolute details of the manufacturing, it is fractions of a millimeter after all. Everything good otherwise, so can recommend if you're willing to possibly file/chip the rings down just a tad if you have to.
I have the same cable, I also bought these little adapters to save me the hassle of cable modificationSo I bought the Tripowin Noire (4 core) cable for these.
It just about fits, I had to file down the prodtruding rings ever so slightly, especially on the red connector to really make it "click" in, I have read others who said theirs fit perfectly so it might just be down to the absolute details of the manufacturing, it is fractions of a millimeter after all. Everything good otherwise, so can recommend if you're willing to possibly file/chip the rings down just a tad if you have to.
MMCX Cable Female(Cable Side) Connector Work for MMCX Cable Connected to Sennheiser IE300 IE900 IE600(Headphone Side) Adapter Black
opis
Head-Fier
- Joined
- Mar 9, 2014
- Posts
- 60
- Likes
- 23
Ah, clever!I have the same cable, I also bought these little adapters to save me the hassle of cable modification
MMCX Cable Female(Cable Side) Connector Work for MMCX Cable Connected to Sennheiser IE300 IE900 IE600(Headphone Side) Adapter Black
ticoss
100+ Head-Fier
- Joined
- Aug 12, 2004
- Posts
- 128
- Likes
- 133
Well, 23$ just for not cutting two small plastic parts, it's a choice.
But at least you have a greater choice of cable afterwards
But at least you have a greater choice of cable afterwards
Last edited:
navii
100+ Head-Fier
- Joined
- Oct 8, 2010
- Posts
- 480
- Likes
- 158
Mmcx connectors are the worst.What's going on with people having one ear piece losing sound or sounding different to the other ear piece? A dynamic driver can't seem to fail so easily. Or maybe it's a problem with the connector.
Simon Patten
100+ Head-Fier
I had a similar problem with mine; after a few weeks (with very little cable swapping) the left bud became intermittent. I swapped the cables around and realised that it was the MMCX plug on that side of the cable so I took it back to the aforementioned Richer Sounds, reproduced it, and they ordered me in a new set. Having burned in the buds with a couple of hundred hours use I didn't want to bother with that again so I just took the cable but bought a Null Audio cable soon after and chucked the Senny cable in the box. Dreadful thing, 3rd party cables sound, feel and connect much better.
My replacement IE600 have arrived, I am impressed by how quickly and smoothly that all went, Richer Sounds couldn’t have been more helpful.
First thing I did was connect my Black Widow cable and put on the eartips I was using on my old IE600. The first thing I noticed when playing music from my Shanling M6U was just how much louder this new set felt. I generally listen at volume level 21 with my previous IE600, with this new pair I lowered that down to 19.
So now I’m wondering if it’s just due to how bright these new set are before they’ve properly burned in/aged, or maybe perhaps both buds of my old set were degrading but the left side had just begun to deteriorate ever so slightly quicker than the right and that’s what caused me to notice the shifting to the right of the stereo image - I’d describe it like instead of the snare drum being smack bang on the bridge of my nose it had shifted to my right eye.
This replacement pair were manufactured in April 2024, my old set were manufactured in June 2023. I’m hoping that if there were any manufacturing issues back then they have been addressed by now and this new pair will remain trouble free for years to come
First thing I did was connect my Black Widow cable and put on the eartips I was using on my old IE600. The first thing I noticed when playing music from my Shanling M6U was just how much louder this new set felt. I generally listen at volume level 21 with my previous IE600, with this new pair I lowered that down to 19.
So now I’m wondering if it’s just due to how bright these new set are before they’ve properly burned in/aged, or maybe perhaps both buds of my old set were degrading but the left side had just begun to deteriorate ever so slightly quicker than the right and that’s what caused me to notice the shifting to the right of the stereo image - I’d describe it like instead of the snare drum being smack bang on the bridge of my nose it had shifted to my right eye.
This replacement pair were manufactured in April 2024, my old set were manufactured in June 2023. I’m hoping that if there were any manufacturing issues back then they have been addressed by now and this new pair will remain trouble free for years to come
RADI0HEAD
100+ Head-Fier
- Joined
- Mar 8, 2011
- Posts
- 486
- Likes
- 441
Just a heads up. I noticed Sennheiser has the IE600 on sale.
Waddiewadkins
100+ Head-Fier
Damn , those ie900s... a year and a half with my 600s and still wanna know how they sound.. they're like more than twice the price!Just a heads up. I noticed Sennheiser has the IE600 on sale.
Waddiewadkins
100+ Head-Fier
I'd hate to break a nozzle grill while cleaning which I'm doing now with the supplied pick I'd be livid!It's more the mesh grills on the nozzles of the IEMs being filled up that bothers me, since you can't replace them with new ones or repair them very easily, or at least not totally. That's why I was wondering if these, the Sennheiser IE600s, were more durable in that regard.
Waddiewadkins
100+ Head-Fier
Ok I used the pick thing on one of the nozzle grills and broke at least one of the inner small pieces as my eyesight allows me to see right now. No difference in sound so I'll just move on from it lesson learned but no physically perfect left ear piece any more. So well, I'm not going to sell them I guess
Last edited:
RADI0HEAD
100+ Head-Fier
- Joined
- Mar 8, 2011
- Posts
- 486
- Likes
- 441
They should have made removable wax filters like Etymotic does. This has me a little concerned. On a positive note, I'm really enjoying the sound quality out of my Sony DAPs.
D3soLaT3
100+ Head-Fier
I just got the Flex ear tips from Kiwi ears and wow.I get a proper seal with the large ear tips so bass stays consistent. The flex also utilize a similar design as stock tips so treble stays close to what Sennheiser intended. Treble may even be better on the Flex. This may be a game changer for the IE 600 especially for those of us who are unable to use the stock large ear tips due to their wonky design. These are my initial impressions and will update if there is enough interest regarding the Kiwi ears Flex tips.
Tips cost $15 from Amazon and ship from China via Linsoul.
Tips cost $15 from Amazon and ship from China via Linsoul.