[H20Fidelity]

Or we could make one ourselves from Australian Kangaroo hide. 
 

 
Make one for Chris as well. Send it along with a vial of Manly beach sand.

 

[Fabi]

Only seller I could find was Amazon but the shipping was just outrageous. $137.00 AUD landed. Considering the case is just $39.95 USD could not justify it.

https://www.amazon.com/Dignis-Leather-Case-iBasso-DX90/dp/B00LI45QW4/ref=sr_1_1?ie=UTF8&qid=1478234213&sr=8-1&keywords=dignis+dx90

Now if I purchased 2 the landed cost would be $192.00. 3 seeing as you have 2 DX90's now would be $247.00 landed. $82.33 each.

So, if you want to split the cost in I'm keen. That's for the Buttero black. Only 5 left in stock so.......

Otherwise I've been looking at this one;

http://www.ebay.com.au/itm/131900250750?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

The Dignis would be the go. Just looks classier. Expensive though.

Have you checked shipping costs with shipping forwarders such as Shipito, etc ?
Never used that service myself but that's what I would do if I wanted one dignis case from US.

 

[bharat2580]

Have you checked shipping costs with shipping forwarders such as Shipito, etc ?
Never used that service myself but that's what I would do if I wanted one dignis case from US.

i just got a dignis myself recently when it was 50% off due to dx90 discontinuation. had my friend buy and ship me to the EU. 
looks great

 

[MLTKSHHBT]

Can anyone advise what's the DX90 mini coaxial out for?
I'm now using dx90's LO to link it to my stereo amp with a 3.5mm to RCA cable, is the output source exactly what we feed in the DX90, says DSD, or up to 24/192?

 

[HiFiChris]

Can anyone advise what's the DX90 mini coaxial out for?

 
To connect an external DAC to it.

 

[MLTKSHHBT]

You mean to connect it with an external DAC an then to the amp?
What's the difference with LO direct connection to the amp?

 

[HiFiChris]

You mean to connect it with an external DAC an then to the amp?
What's the difference with LO direct connection to the amp?

 
Coax out -> the dual SABRE DAC chips of the DX90 (as well as its internal amp section) will be bypassed and the external DAC (Chord Mojo, Leckerton UHA-6S.MKII, ...) will decode the signal.

Line Out: The DX90's dual SABRE DAC chips convert the digital signal to an analogue and the DX90's internal amp section is bypassed.

 

[MLTKSHHBT]

So technically, if we have a good dac(I have a Musical Fidelity V90), it's better to use the coaxial out instead of the LO? I'm talking about a stereo system here.

 

[HiFiChris]

So technically, if we have a good dac(I have a Musical Fidelity V90), it's better to use the coaxial out instead of the LO? I'm talking about a stereo system here.

 
Try both and decide yourself - if you hear a difference, it will be purely a matter of personal preference. However it might be, the DX90's Line Out signal is very clean, clear, neutral and detailed.

 

[oldmate]

 
i just got a dignis myself recently when it was 50% off due to dx90 discontinuation. had my friend buy and ship me to the EU. 
looks great

Thanks.

 

 

 

 

 

 

[oldmate]

Can highly recommend the Audio Technica ATHESW9's with the Sabre DAC. A very warm headphone that takes the edge off quite nicely.
 

 

[H20Fidelity]

  Can highly recommend the Audio Technica ATHESW9's with the Sabre DAC. A very warm headphone that takes the edge off quite nicely.
 
 

 
There's not much my DX90(s) haven't paired well with. They're particularly well behaved with low impedance (fussy) IEMs too from my experience.
 
Another upside I forgot to mention is when using a 2amp charger and USB cable capable of pulling 2amps they charge relatively quickly.
 
I can't stand waiting for devices to charge. it really STUFFS up my OCD...

 

[NealER]

So I accidentally formatted my internal storage to exFAT and now it shows up as 0.00G left/0.00G in the system info, my PC also stopped recognizing it. Anyone got any ideas on how to fix this?

 

[Paul - iBasso]

  So I accidentally formatted my internal storage to exFAT and now it shows up as 0.00G left/0.00G in the system info, my PC also stopped recognizing it. Anyone got any ideas on how to fix this?

You need to go to the 1st page of the DX80 thread and use the Batch Tool to format and load the FW. After you use the BT you will be able to use the DX90 as you have in the past. The instructions for the use of the BT are in the download. For me I had to read through them a few times and you have to follow them exactly. The BT can only be used on a Windows based computer.

 

[NealER]

It worked! Thanks.