what a good idea you have. I would have liked such a meetingI wish I lived closer towards you guys just so I could join in, it would be cool to have a meet, see each others stuff
Hey, if you guys get the 500ohm, grab the one marked graphene, I don't know about the Berry 500ohm
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
DIY Earbuds
- Thread starter gwompki
- Start date
BTW @furyossa just another new arrival tickle for you Jietu also added the 19-21 bery and composite in the inventory, for quite a bit cheaper than what I remember up until this point. Here both of these cost less than 10usd
https://www.aliexpress.com/item/1005002765718710.html
https://www.aliexpress.com/item/1005002765676834.html
Haha, and I could bring the same but we call it Pálinka here in Hungary. I live near Budapest, so it's a bit far unfortunately.
https://www.aliexpress.com/item/1005002765718710.html
https://www.aliexpress.com/item/1005002765676834.html
When you stop by, I'll give you something even stronger. Also traditionally called Palincă . Or I'm waiting for you in Turnu Severin, which is close to Serbia
Haha, and I could bring the same but we call it Pálinka here in Hungary. I live near Budapest, so it's a bit far unfortunately.
Themilkman46290
1000+ Head-Fier
Well, the truth is I didn't have a lot of luck with the metal shells, they sound good, but I didn't like the fit, I am using either the wood shells or mx500 shells, I specially liked the 400ohm in wood, then I played around with the size of the holes in the back, added some cloth bandage tape on the inside and different tuning filtersI have 130 and 400 ohms in the mx500 shell. Do you recommend replacing the shells with the metal ones? And put the 500 ohm one in the MX500?
Mx500 just seem to work better in many cases, so I started to focus on them
Themilkman46290
1000+ Head-Fier
After further tuning I like the 130ohm in the mx500, but I really like the 400 in the wood shells. I didn't love the metal shells.I have 130 and 400 ohms in the mx500 shell. Do you recommend replacing the shells with the metal ones? And put the 500 ohm one in the MX500?
But I am thinking of trying the metal open shells
Perfect! One more reason to see each otherBTW @furyossa just another new arrival tickle for you Jietu also added the 19-21 bery and composite in the inventory, for quite a bit cheaper than what I remember up until this point. Here both of these cost less than 10usd
https://www.aliexpress.com/item/1005002765718710.html
https://www.aliexpress.com/item/1005002765676834.html
Haha, and I could bring the same but we call it Pálinka here in Hungary. I live near Budapest, so it's a bit far unfortunately.
Attachments
I think we already talked about it, 500ohm driver is graphene coated only, they made a typoif you guys get the 500ohm, grab the one marked graphene, I don't know about the Berry 500ohm
You will get probably MX500 shells with 500ohm driver. If you notice distortion or resonance then go with metal shells.I have 130 and 400 ohms in the mx500 shell. Do you recommend replacing the shells with the metal ones? And put the 500 ohm one in the MX500?
If you have problem with fit, metal shells with short stem you can wear in two-way straight up or over ear
Yup. Then you better prepare a barrel of Palincă I think Mr. @robar will come also to quench his thirst with uswhat a good idea you have. I would have liked such a meeting
In my country we call it Šljivovica.BTW @furyossa just another new arrival tickle for you Jietu also added the 19-21 bery and composite in the inventory, for quite a bit cheaper than what I remember up until this point. Here both of these cost less than 10usd
https://www.aliexpress.com/item/1005002765718710.html
https://www.aliexpress.com/item/1005002765676834.html
Haha, and I could bring the same but we call it Pálinka here in Hungary. I live near Budapest, so it's a bit far unfortunately.
Haha. You didn't manage to surprise me this time, I've seen them before. You have to try a little harder next time and try with some new shell
I suggest listening this song before you again
Well, the truth is I didn't have a lot of luck with the metal shells, they sound good, but I didn't like the fit, I am using either the wood shells or mx500 shells, I specially liked the 400ohm in wood, then I played around with the size of the holes in the back, added some cloth bandage tape on the inside and different tuning filters
Mx500 just seem to work better in many cases, so I started to focus on them
@jeejackAfter further tuning I like the 130ohm in the mx500, but I really like the 400 in the wood shells. I didn't love the metal shells.
But I am thinking of trying the metal open shells
You see, it's all about personal preference. We all have different ear shell, and we also hear different.
It all comes down to subjective thinking so until you try it yourself you will never know what is ok, i.e. what suits you best
@Themilkman46290
Or maybe 600ohm sounds better than 500ohm. Who knows
Yay You're right, the linked drivers are not 19-21, I just got confused because externally they look the same as the 19-21 red dot. Do these have names in this group, has anyone tried them?Perfect! One more reason to see each other
In my country we call it Šljivovica.
Haha. You didn't manage to surprise me this time, I've seen them before. You have to try a little harder next time and try with some new shell
I suggest listening this song before you again
Haha okay boss. Yes I know, I linked them first a few months ago but then these were available only at Chitty for 2-3x prices, now they are quite affordable, this is the first time I've seen them below 10usd.
I don't need to prepare anything. We have plenty. Only you guys are missingYup. Then you better prepare a barrel of Palincă I think Mr. @robar will come also to quench his thirst with us
I don't need to prepare anything. We have plenty. Only you guys are missing
Last edited:
Haha okay boss. Yes I know, I linked them first a few months ago but then these were available only at Chitty for 2-3x prices, now they are quite affordable, this is the first time I've seen them below 10usd.
Chitty alway do that. They tried with a higher price but without success, now there are probably some in other stores, so they had to lower the price
Last edited:
I don't know if you've noticed how fashionable it is now for each new pair to cost over $300.
Few days ago new Yinman came out on Taobao and guess what, this is the all info that they have. Like they selling a pair of $5 dollars.
It's important that they did a lot of photos in some "supposedly" retro style
Few days ago new Yinman came out on Taobao and guess what, this is the all info that they have. Like they selling a pair of $5 dollars.
It's important that they did a lot of photos in some "supposedly" retro style