DIY Earbuds
Jun 7, 2021 at 6:24 AM Post #3,542 of 4,683
BTW @furyossa just another new arrival tickle for you :D Jietu also added the 19-21 bery and composite in the inventory, for quite a bit cheaper than what I remember up until this point. Here both of these cost less than 10usd
https://www.aliexpress.com/item/1005002765718710.html
https://www.aliexpress.com/item/1005002765676834.html
When you stop by, I'll give you something even stronger. Also traditionally called Palincă 😉. Or I'm waiting for you in Turnu Severin, which is close to Serbia

Haha, and I could bring the same but we call it Pálinka here in Hungary. :D I live near Budapest, so it's a bit far unfortunately.
 
Jun 7, 2021 at 6:59 AM Post #3,543 of 4,683
I have 130 and 400 ohms in the mx500 shell. Do you recommend replacing the shells with the metal ones? And put the 500 ohm one in the MX500?
Well, the truth is I didn't have a lot of luck with the metal shells, they sound good, but I didn't like the fit, I am using either the wood shells or mx500 shells, I specially liked the 400ohm in wood, then I played around with the size of the holes in the back, added some cloth bandage tape on the inside and different tuning filters

Mx500 just seem to work better in many cases, so I started to focus on them
 
Jun 7, 2021 at 7:01 AM Post #3,544 of 4,683
I have 130 and 400 ohms in the mx500 shell. Do you recommend replacing the shells with the metal ones? And put the 500 ohm one in the MX500?
After further tuning I like the 130ohm in the mx500, but I really like the 400 in the wood shells. I didn't love the metal shells.

But I am thinking of trying the metal open shells
 
Jun 7, 2021 at 7:02 AM Post #3,545 of 4,683
BTW @furyossa just another new arrival tickle for you :D Jietu also added the 19-21 bery and composite in the inventory, for quite a bit cheaper than what I remember up until this point. Here both of these cost less than 10usd
https://www.aliexpress.com/item/1005002765718710.html
https://www.aliexpress.com/item/1005002765676834.html


Haha, and I could bring the same but we call it Pálinka here in Hungary. :D I live near Budapest, so it's a bit far unfortunately.
Perfect! One more reason to see each other 🥳
 

Attachments

  • Screenshot_20210607-140136_AliExpress.jpg
    Screenshot_20210607-140136_AliExpress.jpg
    499.8 KB · Views: 0
Jun 7, 2021 at 7:34 AM Post #3,546 of 4,683
if you guys get the 500ohm, grab the one marked graphene, I don't know about the Berry 500ohm
I think we already talked about it, 500ohm driver is graphene coated only, they made a typo
 
Jun 7, 2021 at 7:41 AM Post #3,547 of 4,683
I have 130 and 400 ohms in the mx500 shell. Do you recommend replacing the shells with the metal ones? And put the 500 ohm one in the MX500?
You will get probably MX500 shells with 500ohm driver. If you notice distortion or resonance then go with metal shells.
If you have problem with fit, metal shells with short stem you can wear in two-way straight up or over ear
 
Jun 7, 2021 at 7:49 AM Post #3,548 of 4,683
what a good idea you have. I would have liked such a meeting
Yup. Then you better prepare a barrel of Palincă :wink: I think Mr. @robar will come also to quench his thirst with us :stuck_out_tongue_winking_eye:
 
Jun 7, 2021 at 8:04 AM Post #3,549 of 4,683
BTW @furyossa just another new arrival tickle for you :D Jietu also added the 19-21 bery and composite in the inventory, for quite a bit cheaper than what I remember up until this point. Here both of these cost less than 10usd
https://www.aliexpress.com/item/1005002765718710.html
https://www.aliexpress.com/item/1005002765676834.html


Haha, and I could bring the same but we call it Pálinka here in Hungary. :D I live near Budapest, so it's a bit far unfortunately.
In my country we call it Šljivovica.

Haha. You didn't manage to surprise me this time, I've seen them before. You have to try a little harder next time and try with some new shell:stuck_out_tongue_winking_eye:
I suggest listening this song before you again
 
Jun 7, 2021 at 8:12 AM Post #3,550 of 4,683
Well, the truth is I didn't have a lot of luck with the metal shells, they sound good, but I didn't like the fit, I am using either the wood shells or mx500 shells, I specially liked the 400ohm in wood, then I played around with the size of the holes in the back, added some cloth bandage tape on the inside and different tuning filters

Mx500 just seem to work better in many cases, so I started to focus on them

After further tuning I like the 130ohm in the mx500, but I really like the 400 in the wood shells. I didn't love the metal shells.

But I am thinking of trying the metal open shells
@jeejack
You see, it's all about personal preference. We all have different ear shell, and we also hear different.
It all comes down to subjective thinking so until you try it yourself you will never know what is ok, i.e. what suits you best

@Themilkman46290
Or maybe 600ohm sounds better than 500ohm. Who knows :wink:
 
Jun 7, 2021 at 8:19 AM Post #3,551 of 4,683
Perfect! One more reason to see each other 🥳
Yay :D You're right, the linked drivers are not 19-21, I just got confused because externally they look the same as the 19-21 red dot. Do these have names in this group, has anyone tried them?
In my country we call it Šljivovica.

Haha. You didn't manage to surprise me this time, I've seen them before. You have to try a little harder next time and try with some new shell:stuck_out_tongue_winking_eye:
I suggest listening this song before you again

Haha okay boss. Yes I know, I linked them first a few months ago but then these were available only at Chitty for 2-3x prices, now they are quite affordable, this is the first time I've seen them below 10usd. :wink:
 
Jun 7, 2021 at 8:49 AM Post #3,553 of 4,683
Last edited:
Jun 7, 2021 at 8:52 AM Post #3,554 of 4,683
Haha okay boss. Yes I know, I linked them first a few months ago but then these were available only at Chitty for 2-3x prices, now they are quite affordable, this is the first time I've seen them below 10usd. :wink:

Chitty alway do that. They tried with a higher price but without success, now there are probably some in other stores, so they had to lower the price
 
Last edited:
Jun 7, 2021 at 9:04 AM Post #3,555 of 4,683
I don't know if you've noticed how fashionable it is now for each new pair to cost over $300.
Few days ago new Yinman came out on Taobao and guess what, this is the all info that they have. Like they selling a pair of $5 dollars.
It's important that they did a lot of photos in some "supposedly" retro style
 

Users who are viewing this thread

Back
Top