[ai03]

Great result.

can you please tell me your braiding technique?

i have to a similar cable soon.

thanks

I used this guide for braiding.

 

[BucketInABucket]

looks good!

your friend will be happy.

i cannot see any Y split.. ?

Cause I didn't include one. It's a simple split from the braid to two twisted cables per channel.

 

[esteboune]

a new cable for my B&W P7
 

 

[Athur126]

Been awhile since I've made a cable

Oyaide gold-plated right angle, westone pins and Oyaide cable I got from Japan. Its a coaxial cable with 7n copper for both shield and signal



Rean/Neutrik gold-plated straight, westone pins and 7n 26 awg copper. It's got black parahord below the Y-split and brown cotton shoe lace without the internals above

 

[esteboune]

Been awhile since I've made a cable

Oyaide gold-plated right angle, westone pins and Oyaide cable I got from Japan. Its a coaxial cable with 7n copper for both shield and signal



Rean/Neutrik gold-plated straight, westone pins and 7n 26 awg copper. It's got black parahord below the Y-split and brown cotton shoe lace without the internals above

 
2 very nice cables.
the Oyaide yellow cable looks great, I really like the products of this company.

 

[esteboune]

My first step in digital cable!
 
OTG cable, micro USB B to micro USB B.
 

 

 

[Eddie C]

 

 

 

 
Made two cables with mogami neglex quad for friends, one 4ft 3.5mm to 3.5mm and the other terminated with mmcx for iem, they look sweet!

 

[P7T3B]

Hello All,
If anyone knows where I can find some (6) of these I would be very grateful!!
I'm going to be making my own speaker cables & want to finish the ends off with these "Y splitters" or whatever they are called.. anyone know they are called? They are made by Acrolink, the only places I have found them are on websites I'm NOT about to use.. they are "available" on eBay, but they are overseas & take 1-2 months delivery.. I recently got burned on eBay buying from Hong Kong so. . .
I really would prefer the carbon fiber, but either would work!?
If anyone knows a U.S. based, or quick shipping, TRUSTED overseas store where these can be had I would be very happy!!
Thanks, Phil B.
 
http://i179.photobucket.com/albums/w300/DELTA_73/Electronics/Acrolink%204Pc%20Carbon%20fiber%20Speaker%20Cable%20Audio%20Cable%20Wire%20Pants%20Boot%20Y%20splitter%20004_zpsmi14wcbr.jpg~original
 
http://i179.photobucket.com/albums/w300/DELTA_73/Electronics/Acrolink%204Pc%20Carbon%20fiber%20Speaker%20Cable%20Audio%20Cable%20Wire%20Pants%20Boot%20Y%20splitter%20002_zpsiovfcuz7.jpg
 
http://i179.photobucket.com/albums/w300/DELTA_73/Electronics/Acrolink%204Pc%20Carbon%20fiber%20Speaker%20Cable%20Audio%20Cable%20Wire%20Pants%20Boot%20Y%20splitter%20003_zpsnewzqwqy.jpg~original
 
http://i179.photobucket.com/albums/w300/DELTA_73/Electronics/Acrolink%204Pc%20Carbon%20fiber%20Speaker%20Cable%20Audio%20Cable%20Wire%20Pants%20Boot%20Y%20splitter%20001_zpsiijz63xt.jpg
 
http://i179.photobucket.com/albums/w300/DELTA_73/Electronics/4-pcs-solid-steel-font-b-Speaker-b-font-font-b-Cable-b-font-Audio-font%20000_zpsgj7riqn5.jpg~original
 
http://i179.photobucket.com/albums/w300/DELTA_73/Electronics/4-pcs-solid-steel-font-b-Speaker-b-font-font-b-Cable-b-font-Audio-font%20001_zpsgfe2kryp.jpg~original
 
http://i179.photobucket.com/albums/w300/DELTA_73/Electronics/4-pcs-solid-steel-font-b-Speaker-b-font-font-b-Cable-b-font-Audio-font%20002_zpsexosrev6.jpg~original

 

[BucketInABucket]

3-pin mini XLR to 3.5mm trs cable for my friend's AKG K240. W2534 sleeved with techflex.

 

[BobG55]

I have a question concerning converting a SE HP cable into XLR connector  male & female w/ SE part.   I have two pairs of Grados PS500e & 1000e both SE.  Both have 15' extension cable due to the shortness of the HP cable on both models.  
 
My question is the following : do I have to change the SE to male XLR on at the end of the cable connected to the HP ?  or can I plug the SE of the cable connected to the HP into the extension cable an convert the SE of the extension cable to XLR ?   I would keep approx. 5" of the SE extension cable and install the female XLR where the cable has been cut in order to plug female and male xlrs when I want to use the HPs SE.
 
In other words the fact that the end of the cable connected to the HP itself remains SE and is inserted into the SE input of the extension cable would that interfere with the conversion further on to xlr with the extension cable ?
 
I know this looks somewhat confusing at first glance but if someone does understand what I'm asking I would greatly appreciate feedback on this.  
 
Thank you all in advance.

 

[liquidzoo]

Hello All,

If anyone knows where I can find some (6) of these I would be very grateful!!

I'm going to be making my own speaker cables & want to finish the ends off with these "Y splitters" or whatever they are called.. anyone know they are called? They are made by Acrolink, the only places I have found them are on websites I'm NOT about to use.. they are "available" on eBay, but they are overseas & take 1-2 months delivery.. I recently got burned on eBay buying from Hong Kong so. . .
I really would prefer the carbon fiber, but either would work!?
If anyone knows a U.S. based, or quick shipping, TRUSTED overseas store where these can be had I would be very happy!!
Thanks, Phil B.

Might want to fix those links, looks like it's the same url multiple times in each block. Should be a single url surrounded by {img} {/img} (with the right braces), no need for the url= part.

 

[alanchanxd]

Re-cabled Etymotic HF5 (26 AWG OCC Cyro Treated 7N Copper cable) connected to my Rock-Boxed clip zip

 

[P7T3B]

Thanks, not sure what happened.. still doesn't work, made them links!?
 
Later, Phil B.

 

[P7T3B]

Hello all,
   Here's an idea I had for some cable I made, they are cable dividers/splitters.. one about every foot or so to separate the wires & give the cables a WOW factor! These could be machined/cast from aluminum & anodized to color match the cables.
Later, Phil B.
 
What do you think?
 
http://i179.photobucket.com/albums/w300/DELTA_73/Electronics/P7T3B_DIY_Audio_Cables_04-20-2013_zps130833ec.jpg~original
 
http://i179.photobucket.com/albums/w300/DELTA_73/Electronics/P7T3B_DIY_Audio_Cables_Explained_04-20-2013_zps193e074c.jpg~original

 

[WalterQ04]

Hello, carbon cables are very difficult to solder > Van den Hul cables. Every good OFC cable works fine, but thats your choice. Best Regards