Darkvoice 336i & 336SE Tuberolling PartII
Sep 5, 2011 at 9:05 PM Post #226 of 14,511
Hey DV336ers,
 
Happy to have just gotten a DV336se from a fellow head-fier. The sad thing is that FedEx dropped the box (which broke a 6AS7), and now, unbelievably, the right channel is dead and buzzing. I want to rule out a bad 6AS7 as the source of the dead channel problem, but given that one has been broken I've got only one remaining. (I've already tried two different 6SN7's, so swapping input tubes does not affect the problem.)
 
I'm hoping that one of you with a big collection of DV336 output tubes might be willing to spare a crappy sounding but working tube and mail it to me. I'd happily pay you via paypal for postage and your time and something, of course, for the crappy sounding but working tube. Let me know.
 
Best,
cws5
 
Oct 8, 2011 at 3:51 PM Post #227 of 14,511
Hi, I am a new 336C owner here. I have been using a LD MKIII for a couple years and I must say the Figaro does sound fuller.
 
When I first powered on there was some hum. After couple of hours the hum went away. So I guess there is no need to do the FITZ mod immediately if you encounter hum issue with new tubes. It might go away.
 
I put on a Sylvania 6SB7GTB and it sounds better. I am getting a RCA black plate and will try it soon.
 
Jan 23, 2012 at 8:19 PM Post #230 of 14,511
I'm going to buy the 336SE very soon but i'm also interested in changing the tubes to something better but don't want to spend too much money figuring out which one is the best combo.
 
So can people tell me what tube combo they found best with the 336SE?
 
Thanks a lot in advance.
 
Jan 24, 2012 at 3:35 AM Post #231 of 14,511
Just bought the Darkvoice 336SE tube amp :D
 
Looking around for some 6AS7/6080 tubes as i just realised my dad actually has a large collection of 6SN7 tubes for this Leak tube amp. I'll also be changing the coupling to paper oil caps later.
 
Jan 25, 2012 at 2:31 AM Post #232 of 14,511
I liked the Tung Sol 5998 in the rear with the RCA grey glass 6SN7 in front (or Sylvania Bad Boy).  Sold the amp ages ago for my maxed WA6, which is a good step up, but the 336i was still pretty darn good for the price.
 
Jan 26, 2012 at 10:56 PM Post #234 of 14,511
I did just order a GEC 2523 should do mighty fine in the 336. I sold the 336se but my woo3+modified uses the same power tube.
 
Jan 27, 2012 at 3:20 AM Post #235 of 14,511
 
Quote:
 6AS7, 6080, 5998, ECC32 etc can all be used on the back socket but does it require any changes on the circuit?


ECC32 won't do, otherwise no changes required. Also 6520, ECC230, 6N13S, 421A, ...
 
Quote:
I did just order a GEC 2523 should do mighty fine in the 336. I sold the 336se but my woo3+modified uses the same power tube.


Please don't drop the CV part. GEC CV2523 = GEC A1834 = GEC 6AS7G.
 
 
Jan 27, 2012 at 7:30 PM Post #238 of 14,511

tongue.gif
oops, most peeps I hang with just use the numbers. Forgot where I was at.........
wink.gif

Quote:
 
Please don't drop the CV part. GEC CV2523 = GEC A1834 = GEC 6AS7G.

 



 
 
 
Feb 6, 2012 at 11:14 PM Post #239 of 14,511
Received my 336SE today but the tubes that were provided had rust in them and only 1 channel worked :frowning2: So now i have to wait for my 6as7 tubes to arrive.
 
Will ask the seller to give me a partial refund or replace the tubes. Not sure which one at this stage but most likely partial refund.
 
Feb 10, 2012 at 7:37 PM Post #240 of 14,511
Unrelated to tubes but related to 336SE.
 
Does anyone know what the ratings are for the coupling caps?
 
I want to change from 6 to 2 paper oil cap but i'm not sure what the voltage and uF is on the red caps.
 

Users who are viewing this thread

Back
Top