Chord Mojo(1) DAC-amp ☆★►FAQ in 3rd post!◄★☆

[Mython]

For any newcomers who are unsure what to make of the past page or so of discussion, please be aware that there are two different discussions going on simultaneously, about different 3.5mm connector types (and associated adapter options), for 2 entirely different purposes.
 
 

1. One discussion relates to a cable to digitally connect a Fiio X3mk2 or X5mk2 DAP to Mojo, via co-axial

 
 

1. The other discussion relates to an analogue cable to connect a headphone with a 'balanced' TRRS connector to Mojos non-balanced TRS socket.

 
 
 
 
If anyone is confused about this, don't be afraid to ask, but please be clear about the exact nature of your own equipment and situation, to avoid any further confusion.
 
 

 

 

[x RELIC x]

i haven't seen anyone try such a thing

Not uncommon for using balanced headphones with a SE amp.

 

[EagleWings]

  Remember be very careful about connection compatibility with the gen 2 Fiio DAPs. They really do have an illogical signal path, so I would personally avoid trying to use adapters and the like - far better to get a cable wired specifically for the purpose:
 
www.head-fi.org/t/784602/chord-mojo-the-official-thread-please-read-the-3rd-post/16320#post_12518193
 

 
Please let me know if what I posted in this link here would work. If not, I need to remove the links so that people are not misguided..
 
http://www.head-fi.org/t/784602/chord-mojo-the-official-thread-please-read-the-3rd-post/17985#post_12600647

 

[Painful Chafe]

  For any newcomers who are unsure what to make of the past page or so of discussion, please be aware that there are two different discussions going on simultaneously, about different 3.5mm connector types (and associated adapter options), for 2 entirely different purposes.
 
 

1. One discussion relates to a cable to digitally connect a Fiio X3mk2 or X5mk2 DAP to Mojo, via co-axial

 
 

1. The other discussion relates to an analogue cable to connect a headphone with a 'balanced' TRRS connector to Mojos non-balanced TRS socket.

 
 
 
 
If anyone is confused about this, don't be afraid to ask, but please be clear about the exact nature of your own equipment and situation, to avoid any further confusion.
 
 

 

Ok, exactly what cable do I need to connect an X3 II DIGITALLY to a Mojo?

 

[gnarlsagan]

Ok, exactly what cable do I need to connect an X3 II DIGITALLY to a Mojo?

Would also like to know this.

 

[jmills8]

Would also like to know this.

X3 has a coaxl and a seperate line out while the X3 has both in one.

 

[VerBla]

Would also like to know this.

 
 

  Ok, exactly what cable do I need to connect an X3 II DIGITALLY to a Mojo?

You will need a Coax cable that has a 4 pole side for the Fiio X3II or X5II and a 2 pole side to use with the Mojo.
Like this one for example: 

 

[Mython]

 

  Remember be very careful about connection compatibility with the gen 2 Fiio DAPs. They really do have an illogical signal path, so I would personally avoid trying to use adapters and the like - far better to get a cable wired specifically for the purpose:
 
www.head-fi.org/t/784602/chord-mojo-the-official-thread-please-read-the-3rd-post/16320#post_12518193
 

 
Please let me know if what I posted in this link here would work. If not, I need to remove the links so that people are not misguided..
 
http://www.head-fi.org/t/784602/chord-mojo-the-official-thread-please-read-the-3rd-post/17985#post_12600647

 
 
 
Personally, I would prefer not to use an adapter, but, as long as the centre pin of the L21 RCA is used as the 'signal', and not the 'ground', then yes, the combination you propose could work successfully, with X3ii, X5ii, and X7.
 
 
 
Post #3 contains some links and pics :
 
 
Fiio x3ii, X5ii, and X7 owners, please note: www.head-fi.org/t/784602/chord-mojo-the-official-thread-please-read-the-3rd-post/14070#post_12442957
MoonAudio offer suitable cables
Custom-Cable also offer suitable cables

 
 
'Dyson' Co-Axial cable for Fiio X3ii, X5ii & X7

 


 
'Uranus' Co-Axial cable for Fiio X3ii, X5ii, & X7

(image credit: 'noobandroid')
 

 
 
Here are the signal paths for an appropriate Co-Axial cable to connect Fiio X3ii, X5ii, & X7 DAPs to Mojos Co-Axial digital input:
 

(pin-out identities based upon these: www.head-fi.org/t/784602/14985#post_12467535 )
 
 
 
 
Just to be clear - if anyone reading this has an original Mk1 version of the X3 or X5, then they need a different digital connection cable. The above information is for X3 Mk2, X5 Mk2, and X7
 
 
.

 

[EagleWings]

Post Deleted.

 

[Mython]

Thanks - yes; one of the problems with eBay is that the listings go out of date, periodically. However, even if I update now, it'll inevitably go out of date again and again

 
Please let me know how you get on with your L21 + adapter

 

[EagleWings]

Post Deleted.

 

[essentiale]

Just to clarify... What is the adaptor for? Is it a female TRRS to male TRS for headphones? If yes then it will work.

Like this?

Nah it's just a simple wywires 4pin XLR female to 3.5mm TRRS male adapter. I guess it can't be used with the mojo

 

[Tympan]

Has anyone tried the mojo with Zen 2.0? I feel like the match is on the darker/laid back side and might not be as good as the Zen can be. 
 
... What would be really good match with mojo? (aside from Shozy Zero)

 

[vapman]

  Has anyone tried the mojo with Zen 2.0? I feel like the match is on the darker/laid back side and might not be as good as the Zen can be. 
 
... What would be really good match with mojo? (aside from Shozy Zero)

It's good. It's really, really good. They complement each other very well.

 

[Tympan]

just wondering if VE RA is even better