[capnjack]

thanks picked up the 4" from ebay.  I like the forza cable but quite expensive.

http://forzaaudioworks.com/en/product.php?id_product=98 I bought this one, it looks and sounds excellent! However I'm not a cable builder well worth it in my opinion, got the eBay one as a spare tho
The shanling one doesn't work as otg tho which doesn't really make a lot of sense

 

[guido]

 
Bump. I'm about to order Fiio's L19 (lightning to micro USB) that has traditionally worked for users. But with the recent updates, I don't want to waste $30.

works for me..

 

[WayTooCrazy]

I'm sure those boutique cables are amazing! I actually do not like the "cheap" ones off eBay either. So... if you can "tinker" and DIY your own, you'll get a good return on time/money invested. Though, it isn't for everyone.

That cable is an OTG cable (both ends), so I can reconfigure in any way that suits me. It was built out of spare Mogami W2893 that I had lying around.

 

[karloil]

  I'm a DIY guy... I can build a Toxic Cables Silver cabled version for much, much cheaper.  I actually built my Coax cable out of Toxic Cables SPC. Works fine.

 
also DIYed a Coax cable (with full spec 75ohm cable)
 

 

[WayTooCrazy]

   
also DIYed a Coax cable (with full spec 75ohm cable)
 
 

That looks very nice! Congrats on a Great job!

 

[karloil]

  That looks very nice! Congrats on a Great job!

 
Thanks! I might need your help soon as i want to create a USB C to Micro USB soon.

 

[WayTooCrazy]

   
Thanks! I might need your help soon as i want to create a USB C to Micro USB soon.

I've not built one before, but I have the parts.  This page might be a good primer.

 

[karloil]

  I've not built one before, but I have the parts.  This page might be a good primer.

 
Thanks! was also looking at other threads and sites on pin outs. this is useful!

 

[WayTooCrazy]

Thanks! was also looking at other threads and sites on pin outs. this is useful!

I wasn't aware that USB-C also required OTG capability. I thought it was supposed to be built into the host device. I will have to continue looking to make sure (or sacrifice one of my cables to verify).

 

[harpo1]

I wasn't aware that USB-C also required OTG capability. I thought it was supposed to be built into the host device. I will have to continue looking to make sure (or sacrifice one of my cables to verify).

I know the Shanling M1 to mojo requires an OTG capable cable.

 

[Deftone]

  can anyone recommend a USB C to micro OTG cable for use with Cayin N3 to Mojo, I have had a look in the 3rd post but they all seem to be B to micro?  Id prefer very short 10cm or so and ideally silver.  I have asked pennon already but they don't do one.

 
http://www.ebay.co.uk/itm/4-Right-Angle-Micro-USB-to-Type-C-OTG-Cable-for-Portable-Digital-DAC-Amplifier/262700661665?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D2%26asc%3D40656%26meid%3D54cf987e62f4449bb8001be84b9ed1bb%26pid%3D100005%26rk%3D6%26rkt%3D6%26sd%3D262565743891
 
Your welcome.

 

[Deftone]

It seems to be pretty slow in the thread lately, possibly a mixture of those waiting for poly and hugo2 reviews.

 

[maxh22]

  It seems to be pretty slow in the thread lately, possibly a mixture of those waiting for poly and hugo2 reviews.

This ^
 
A couple more weeks and more people should have a Hugo 2 on hand (hopefully I will).

 

[WayTooCrazy]

@karloil No VooDoo Magic on the DIY USB-C to MicroUSB Cable. I just built one and it works GREAT (out of Mogami W2893)!
 
I used my LG V20 and neither side is OTG. I do not know how other USB-C devices will react though. 

 

[karloil]

@karloil
 No VooDoo Magic on the DIY USB-C to MicroUSB Cable. I just built one and it works GREAT (out of Mogami W2893)!

I used my LG V20 and neither side is OTG. I do not know how other USB-C devices will react though. 

Great! :thumbsup_tone1: I would have to ask you again in the near future as i'm still sourcing for a USB C locally

Planning to use the cable between a Cayin N3 and Mojo.