CHIFI LOVE Thread-A never ending IEM-Heaphones-DAP-Dongles Sound Value Quest
Jul 9, 2020 at 10:18 AM Post #25,051 of 31,833
That’s still only 10 per side. Where the C36?!

https://www.aliexpress.com/item/32929300978.html

HTB1nz8vXJfvK1RjSszhq6AcGFXau.jpg

HTB1lykNcQPoK1RjSZKbq6x1IXXaA.jpg


CTZ 42BA is here!!!

Actually these CHIFI manufacturers like to exaggerate the driver count by adding both sides' worth of drivers in the naming convention, this set is actually 21 BA per side. Still in the driver's seat (no pun intended) in the driver nuclear race, mind you.
 
Jul 9, 2020 at 10:19 AM Post #25,052 of 31,833
https://www.aliexpress.com/item/32929300978.html

HTB1nz8vXJfvK1RjSszhq6AcGFXau.jpg
HTB1lykNcQPoK1RjSZKbq6x1IXXaA.jpg

CTZ 42BA is here!!!

Actually these CHIFI manufacturers like to exaggerate the driver count by adding both sides' worth of drivers in the naming convention, this set is actually 21 BA per side. Still in the driver's seat (no pun intended) in the driver nuclear race, mind you.
How they even fit in all of them is beyond me lol. Are they perhaps using super oversized shells made for elephant ears? :grin:
 
Jul 9, 2020 at 11:58 AM Post #25,053 of 31,833
There was supposed to be a C20 (10 BA) and then a C18 (9BA) but they never appeared.
Well I actually meant 1DD, 8BA if it wasn't immediately obvious so maybe add an extra 30095 for a smoother treble response so it would have the dynamic for bass, 4 mids and 4 tweeters, again like the Legacy 9, 8+1 or the NCM Bella(although this one is 4 way woofer, 4 mids, 2 tweeters and 2 super tweeters apparently and I can't find the crossover information for the 2 others)... To which i wonder if there's any point in a subwoofer, woofer, mid, tweeter and super tweeter configuration. And what's the point of a super tweeter anyway?
 
Jul 9, 2020 at 12:06 PM Post #25,054 of 31,833
Well I actually meant 1DD, 8BA if it wasn't immediately obvious so maybe add an extra 30095 for a smoother treble response so it would have the dynamic for bass, 4 mids and 4 tweeters, again like the Legacy 9, 8+1 or the NCM Bella(although this one is 4 way woofer, 4 mids, 2 tweeters and 2 super tweeters apparently and I can't find the crossover information for the 2 others)... To which i wonder if there's any point in a subwoofer, woofer, mid, tweeter and super tweeter configuration. And what's the point of a super tweeter anyway?
Dude, it’s SUPER!! What else matters?

Actually, I think it’s specifically meant to extend treble response, especially above 10KHz, like the supertweeter in the IER-ZIR.
 
Jul 9, 2020 at 12:31 PM Post #25,055 of 31,833
Well I actually meant 1DD, 8BA if it wasn't immediately obvious so maybe add an extra 30095 for a smoother treble response so it would have the dynamic for bass, 4 mids and 4 tweeters, again like the Legacy 9, 8+1 or the NCM Bella(although this one is 4 way woofer, 4 mids, 2 tweeters and 2 super tweeters apparently and I can't find the crossover information for the 2 others)... To which i wonder if there's any point in a subwoofer, woofer, mid, tweeter and super tweeter configuration. And what's the point of a super tweeter anyway?
The KZ ZS7 and BA10 are both 4-way designs. ZS7: 1DD + 29869, 31005 and 2x 30095. BA10 has 22955 bass BA instead of the DD.
 
Jul 9, 2020 at 12:40 PM Post #25,056 of 31,833
Dude, it’s SUPER!! What else matters?

Actually, I think it’s specifically meant to extend treble response, especially above 10KHz, like the supertweeter in the IER-ZIR.
Well I always though super tweeters were for 20kHz and over... IEMs for audiophile bats?

... I wonder if anyone has also mated a single full range BA to a DD to cover the point where the BA rolls off in the bass (60Hz and under?).

Edit: Double post?
 
Jul 9, 2020 at 12:55 PM Post #25,057 of 31,833
These arrived today. They are really good lookers... Let's hope they sound good as well!
IMG_20200709_165439.jpg
 
Jul 9, 2020 at 3:49 PM Post #25,062 of 31,833
Well I always though super tweeters were for 20kHz and over... IEMs for audiophile bats?

... I wonder if anyone has also mated a single full range BA to a DD to cover the point where the BA rolls off in the bass (60Hz and under?).

Edit: Double post?
If I’m not mistaken, I think that supertweeters in the loudspeaker realm typically cover the ultra high frequencies, 20-40KHz, to allegedly add “ambience”. With IEMs it seems the challenge is to get treble extension, at a good level, above 10KHz. To me, supertweeters in speakers didn’t make sense, but I don’t have any.

I think the Penon Orb is a full-range BA with a DD. Though I’m not certain if there is a x-over.
 
Jul 9, 2020 at 5:07 PM Post #25,063 of 31,833
Well I always though super tweeters were for 20kHz and over... IEMs for audiophile bats?

... I wonder if anyone has also mated a single full range BA to a DD to cover the point where the BA rolls off in the bass (60Hz and under?).

Edit: Double post?
The extra treble extension of a super tweeter reproduces upper harmonics which modulate lower frequencies and produce accurate timbre in frequencies we can hear.
 

Users who are viewing this thread

Back
Top