Are these will fit DQ6 and it is suitable? https://www.aliexpress.com/item/32736006455.html
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Best IEM tips?
- Thread starter lilboozy
- Start date
Barusu Lamperouge
Headphoneus Supremus
They're like Sony Hybrid tips and they will add some energy across all the frequencies. If you find DQ6 little mellow for your tastes then they're perfect. Also, they help in taming mid-bass so if you find bloat in that region they'll help you. Also, if you are purchasing them, try on eBay they're way cheaper over there, not sure if they're still in stock though.Are these will fit DQ6 and it is suitable? https://www.aliexpress.com/item/32736006455.html
Last edited:
zacca113
New Head-Fier
Do you need to downsize for Spiral Dots like Xelastec or should you go true to size? My friend wears MS for Xelastec but doesn't know what size Spiral Dots to get.
Gavern
New Head-Fier
- Joined
- Jan 24, 2013
- Posts
- 38
- Likes
- 41
Hi! Any chance someone knows where/what this tip is from? Found them in my pile of tips and it fits nicely with my IEMs. Or any tip similiar to it?
May have come from one of my Iems :
Moondrop Aria
Sony MH1C
Tin T2
Vsonic Vsd 5S
Philips SH3580
Looks the small size Acoustune AET07
Hi! Any chance someone knows where/what this tip is from? Found them in my pile of tips and it fits nicely with my IEMs. Or any tip similiar to it?
May have come from one of my Iems :
Moondrop Aria
Sony MH1C
Tin T2
Vsonic Vsd 5S
Philips SH3580
cappuchino
Previously known as sub30
Anyone have silicone ear tip recommendations for T100/3mm sized nozzles?
The only one I can find are the Spinfit CP800. Double and triple flange is okay, as well. Preferably
"cheap" at less than 5 USD. IEM to use it will be the Lypertek Bevi 2.
The only one I can find are the Spinfit CP800. Double and triple flange is okay, as well. Preferably
"cheap" at less than 5 USD. IEM to use it will be the Lypertek Bevi 2.
Dinche
100+ Head-Fier
Except for smooth/shiny metal nozzles, where they easily slide off.Structural integrity I think. The cores of the Final E tips are really quite firm/rigid, and they really grip tightly to the IEM nozzles.
Regards
Barusu Lamperouge
Headphoneus Supremus
BGVP have one for $0.70 you can check their store on AliExpress or Shoppee. They're comfortable and of good quality.Anyone have silicone ear tip recommendations for T100/3mm sized nozzles?
The only one I can find are the Spinfit CP800. Double and triple flange is okay, as well. Preferably
"cheap" at less than 5 USD. IEM to use it will be the Lypertek Bevi 2.
cappuchino
Previously known as sub30
I don't think they have one for 3mm nozzlesBGVP have one for $0.70 you can check their store on AliExpress or Shoppee. They're comfortable and of good quality.
Barusu Lamperouge
Headphoneus Supremus
The one with maroon bore E01 should ideally fit. It is very small bore and I doubt it is exactly 3.5mm. I'll insert one earphone jack and check. But I feel they should fit your 3mm IEMs as well.I don't think they have one for 3mm nozzles
Sundavor
New Head-Fier
- Joined
- Apr 25, 2016
- Posts
- 23
- Likes
- 19
I've bought a set of 3 Comply ear tips years ago and my last ones have started to disintegrate. I'm looking for something new to try as they were never quite right for me.
Does anyone have any tips?
Does anyone have any tips?
assassin10000
Headphoneus Supremus
Tennmak foams. They have a smooth skin and can be cleaned with soap and water.I've bought a set of 3 Comply ear tips years ago and my last ones have started to disintegrate. I'm looking for something new to try as they were never quite right for me.
Does anyone have any tips?
bk123
500+ Head-Fier
- Joined
- Nov 15, 2015
- Posts
- 761
- Likes
- 1,067
It's normal in size. no need to downgrade. you can refer this thread: https://www.head-fi.org/threads/comply-vs-spiral-dot-vs-spinfit.795683/page-2#post-13100356Do you need to downsize for Spiral Dots like Xelastec or should you go true to size? My friend wears MS for Xelastec but doesn't know what size Spiral Dots to get.
for size.
PowerCycles
Head-Fier
- Joined
- Jan 9, 2014
- Posts
- 50
- Likes
- 36
Hi! I've read a few pages and I've found that the most recommended tips here are the Final E (clear) and Radius Deep Mount.
I am planning to get both for my JVC HA-FDX1. Right now I'm using the MS size (?), what Final and Radius tips size should I get?
I am planning to get both for my JVC HA-FDX1. Right now I'm using the MS size (?), what Final and Radius tips size should I get?