Audeze LCD-4
Oct 28, 2023 at 7:11 AM Post #11,536 of 12,053
Never found a stand that I liked, so mine go back in the box when I'm done. Annoying having to get them out, but maybe it eliminates headband wear/stretching.
 
Oct 28, 2023 at 3:00 PM Post #11,537 of 12,053
Anyone have any idea what the size and model screws are used on the LCD-4 to attach the grills?

I'm looking to replace them with chrome versions but want to ensure I have the correct size and spec.
 
Oct 28, 2023 at 3:43 PM Post #11,538 of 12,053
Anyone else using the Oratory EQ? It made a massive difference to the stock tuning.

I left 12000Hz at 0db as I like that treble extension and 4db instead of 6db gain at 4400Hz.
 
Oct 28, 2023 at 3:51 PM Post #11,539 of 12,053
Anyone else using the Oratory EQ? It made a massive difference to the stock tuning.

I left 12000Hz at 0db as I like that treble extension and 4db instead of 6db gain at 4400Hz.
Is it better than metals? Could you share these?

EqualizerAPO EQ Preset:


Channel: all
Preamp: -4 dB
Filter 5: ON LS Fc 100 Hz Gain 2 dB
Filter 6: ON PK Fc 1000 Hz Gain -3 dB Q 1.41
Filter 8: ON PK Fc 4500 Hz Gain 4.5 dB Q 1.41
Filter 9: ON PK Fc 6000 Hz Gain -2 dB Q 3
Filter 10: ON PK Fc 11000 Hz Gain -2 dB Q 2
Filter 11: ON HS Fc 10000 Hz Gain -4 dB

they are from Metal571
 
Oct 28, 2023 at 3:57 PM Post #11,540 of 12,053
Is it better than metals? Could you share these?

EqualizerAPO EQ Preset:


Channel: all
Preamp: -4 dB
Filter 5: ON LS Fc 100 Hz Gain 2 dB
Filter 6: ON PK Fc 1000 Hz Gain -3 dB Q 1.41
Filter 8: ON PK Fc 4500 Hz Gain 4.5 dB Q 1.41
Filter 9: ON PK Fc 6000 Hz Gain -2 dB Q 3
Filter 10: ON PK Fc 11000 Hz Gain -2 dB Q 2
Filter 11: ON HS Fc 10000 Hz Gain -4 dB

they are from Metal571
Yes I prefer it over Metals EQ but I made the amendments as stated in my previous post. Oratory states a -10db at 12000Hz which just kills the treble clarity and airiness.

EQ preset in link below;

https://www.dropbox.com/s/nm18lctf4xwh7cg/Audeze LCD-4.pdf?dl=0
 
Last edited:
Oct 28, 2023 at 4:13 PM Post #11,541 of 12,053
I used Metal571's for a long time. I've been A/B'ing Metal571's against a profile that was inspired by dfiled. It's purely subtractive, so it doesn't require any preamp change.

LS 70 Hz -1
PK 300 Hz -3 Q1
PK 1k Hz -9 Q1.1
PK 4k Hz +1 Q1.1
HS 10k Hz -7 Q0.8

This profile is a similar shape to Metal571's, but increases the delta between 1k and 4k. I think I prefer it.

Here's Metal571's:

1698523695644.png


Here's mine:
1698523727152.png


And here's a smoothed version of defiled's profile that I based it on. I didn't find that the plateau from 2k to 3k made a difference to my ears, but the flattened area between 200h and 1k made a big difference.

1698523874974.png
 
Oct 30, 2023 at 2:18 PM Post #11,543 of 12,053
Same here, the headband stretches over the time.
Specially if you hang the ‘phones on it for storage.

Did some new holes at the bands mounting part too, and it’s fine again.
Hang it on the rigid part now.
That's so infuriatingly Audeze. Don't use an omega stand, because you'll flatten the pads!! Also, don't hang them, you'll stretch the suspension strap!
 
Oct 30, 2023 at 4:52 PM Post #11,544 of 12,053
That's so infuriatingly Audeze. Don't use an omega stand, because you'll flatten the pads!! Also, don't hang them, you'll stretch the suspension strap!
In my experience, all suspension straps are stretchable if hung on too narrow a ledge. Audeze's issue is just that the headband is designed to be very close suspension strap. Any stretch becomes immediately noticeable.

As for the pads, it is the same reason they insist on glue. The material they use sounds the best in their opinion. Thus. it is a worthy tradeoff. Better seal, better bass, convenience be damned.
 
Oct 30, 2023 at 5:27 PM Post #11,545 of 12,053
That's so infuriatingly Audeze. Don't use an omega stand, because you'll flatten the pads!! Also, don't hang them, you'll stretch the suspension strap!


Here's how I hang LCDs without any issues at all:

lcd3hang.jpg
 
Oct 30, 2023 at 5:42 PM Post #11,546 of 12,053
I have owned a LCD-2f, X, 4, and currently a 5. Every one the strap sat flat on my head. Not one had any "suspension" in the suspension headband. So it goes.
 
Oct 30, 2023 at 6:43 PM Post #11,547 of 12,053
I have owned a LCD-2f, X, 4, and currently a 5. Every one the strap sat flat on my head. Not one had any "suspension" in the suspension headband. So it goes.
My LCD-4 is the same way, I guess because I have it in the lowest possible position. Fortunately, it doesn't bother me at all. Just love these headphones : )
 
Oct 30, 2023 at 6:57 PM Post #11,548 of 12,053
That's so infuriatingly Audeze. Don't use an omega stand, because you'll flatten the pads!! Also, don't hang them, you'll stretch the suspension strap!
Oh…. the Audezeity !! 😵‍💫😤
 
Oct 31, 2023 at 4:29 PM Post #11,549 of 12,053
Anyone else using the Oratory EQ? It made a massive difference to the stock tuning.

I left 12000Hz at 0db as I like that treble extension and 4db instead of 6db gain at 4400Hz.

I will give it a try, thanks for sharing.
Oratory preamp is -9,7 dB, whats your preamp volume?
 
Oct 31, 2023 at 5:47 PM Post #11,550 of 12,053
I will give it a try, thanks for sharing.
Oratory preamp is -9,7 dB, whats your preamp volume?
-13 dB preamp because I add 8.5 dB at 105hz instead of 5.5 dB
 
Last edited:

Users who are viewing this thread

Back
Top