Hello and thank you for your angagemang!
I've checked and all components are correctly fitted
Since
I have found a bad solder on a cable that goes to the right channel filter capacitors fixture that includes:
10000uF63V Elna for Audio
1000uF63V Elna
220uF63V Elna
100uF63V Elna
10uF63V Ero MKT
4,7uF63V Ero MKC
2.2uF100V Ero MKT
1uF63V Wima FMD
0.22uF 63V MKT
But wonder if it can burn
both R21 and R22 resistor.
R21 to steady done "little" hole in the PCB
R22 is only burns
More info
Changed blown Logitech speakers with sub Pioneer TS-W261D4 is two spolig 4ohm and brygat out between the plus and minus!
PreAmp panel I have changed ceramic capacitors with
K73-160.22uF 160V is it ok?
The residue was used
1 pc. 4700UF 63V ELNA KENWOOD
13 pcs. 22UF 50V Elna Silmic II
6st. 47uF 50V Elna Silmic II
1st. 10uF 16V Elna Silmic II
12st. 0.22uF 63V MKT
1st. 1uF63V Wima MKS
2st | TEXAS INSTRUMENTS - OPA1602AID - OP AMP, AUDIO, BIPOLAR, 8MS...
|
Kontrol pod, I purchased components not modat than
It was not cheap can not stop now and throw everything
SINCERELY
Cmiky