Crypt Keeper
500+ Head-Fier
I'm using Cybershaft clock that gets to: below 3.0E-13 (0.00030ppb/s) / -119.6 dBc @ 1Hz in just 72 Hrs ...I saw the clock crystal. How low is the ppb?
I ordered the spdif2 which should have a better clock.
I'm using Cybershaft clock that gets to: below 3.0E-13 (0.00030ppb/s) / -119.6 dBc @ 1Hz in just 72 Hrs ...I saw the clock crystal. How low is the ppb?
I ordered the spdif2 which should have a better clock.
You have a Triple Crown power cord? It is over 700 usd. What do you use it on?Agree... The Dragon (source/current) is the best AC cable (price wise) I was able to find on Ali...
Wow thats impressive. Is that a master clock?I'm using Cybershaft clock that gets to: below 3.0E-13 (0.00030ppb/s) / -119.6 dBc @ 1Hz in just 72 Hrs ...
master clock means like. You can bypass the clock on that Etherregen and use the Cybershaft instead?I'm using Cybershaft clock that gets to: below 3.0E-13 (0.00030ppb/s) / -119.6 dBc @ 1Hz in just 72 Hrs ...
Yes. Different clock signal with different frequency may be required inside the device. The device is able to derive them from the connected master clock signal. If all chained devices are fed by the same clock, you can say they are synched. Phase noise of low frequency gets also drastically reduced. All to the benefit of sound quality.master clock means like. You can bypass the clock on that Etherregen and use the Cybershaft instead?
I am very new to clock.
Ok thanksYes. Different clock signal with different frequency may by required inside the device. The device is able to derive them from the connected master clock signal. If all chained devices are fed by the same clock, you can say they are synched. Phase noise of low frequency gets also drastically reduced. All to the benefit of sound quality.
Yes, this cord is expensive, but I was able to make a deal with the vendor (Cheap shop store) and get 15% off /no tax … I also purchased my triple crown speaker cables & XLRs from this guy. This power cable would be an upgrade for any device: Amp, Preamp, DAC or DDC. That’s why I want / need more of these Siltech triple crown pwr cables. I own both Dragons, but for me this one beats them all …You have a Triple Crown power cord? It is over 700 usd. What do you use it on?
Yes !Wow thats impressive. Is that a master clock?
Yes, good master clock + heavy grounding box +Isolation transformer = Magic…Ok thanks
Those cybershaft looks serious. I want it
…If my Chord TT2 could do this I would buy a master clock.
I have a Hagerman Frycleaner. Have used one and a Audioharma for years. Hagerman works well but has limitations on the cables that can be hooked up to it. The one I have can only burn in line level cables.Is this Hagerman FryCorder burn in box really worth it ? Is it good ? / your experience using this box compared to the "traditional burn-in" process ?
Thanks
Thanks !I have a Hagerman Frycleaner. Have used one and a Audioharma for years. Hagerman works well but has limitations on the cables that can be hooked up to it. The one I have can only burn in line level cables.
Not cheap but works. So does Hagerman but again only useful for line level cables. Hagerman will allow the cable to perform better than just burning in on a system. I have burned in at least 50 cables on my Hagerman.Thanks !
Yes, I have looked into the Audioharma, awesome device but not cheap at all
Just placed my order for FryCorder2 - Power Cord Burn-In Generator ... Damn addictionNot cheap but works. So does Hagerman but again only useful for line level cables. Hagerman will allow the cable to perform better than just burning in on a system. I have burned in at least 50 cables on my Hagerman.
This came in today.. (First impression) was insanely good even without burn-in. Let's wait for 500hrs n see how it performs