Try using hesuvi but setting up a virtual 7.1 device for your DAC using HiFiCable + Asio Bridge https://sourceforge.net/p/hesuvi/discussion/general/thread/ce7c354dd7/

High resolution mode is stereo only. I think you need to change the headphone to 7.1 mode: "A three-second press of the Microphone Volume Control will toggle through the three audio resolution modes available via USB connection. Those three modes are as follows: [...]"...

This thread is a true patrimony of Head-Fi.

Thank you for the response. I'm talking about the cable input on the headphone itself. I can't see how a 2.5mm is more used by the Head-fi audience than a standard 3.5mm input? By using a 3.5mm input (preferentially without the locking mechanism), we could use a plethora of cables and easily...

The 560S is a really good headphone for gaming. Too bad I had to crack my unit open and remove the lock inside, so I could use a regular 3.5mm mic cable. Why not use a standard 3.5mm universal input jack from the start?

You need good EQ and headroom to avoid clipping.

Guys, what would be a recommended EQ setting to make the ER2SE mimic ER2XR's frequency response? Someone suggested +6db low shelf @125hz Q7.0, but I'm not sure it's right. Thanks

Did Etymotic already release the microphone cable they promised about 5 years ago?

Hello, I'm currently experimenting HeSuVi's Crossfeed implementation via EqualizerAPO. Which settings should I input to have a Jan Meier-like approach? These are the available settings: Frequency Cutoff: The frequency that is central to the gain changes set below. Direct Shelf Boost: The gain...

I got the Yaxi MSR7 Comfort pads, and they are indeed very comfortable and sound good. I'm just not 100% satisfied with the upper bass of this headphones. They sound kind of "cuppy". But I'm not afraid of a little EQ, so everything is good

Another thing: the left cup is always warm to the touch when plugged in, even if the phones weren't used for days. That signals battery and power waste.

Lol, I just discovered that the previous owner removed the felt/paper that covered the holes around the driver, right underneath the pad. I'm talking about the white part in the pic below: So I covered it back up with some tape, and oh boy, everything is way more balanced now. I believe I got...

That's very unfortunate, since I can't buy the originals anywhere. They are out of stock from ATH's website. In fact, any headphones that dont have original earpads ready for sale are essentialy disposable, unless people like to mess up with the projected sound profile. Thank you for the tip on...

I have just bought a used pair of these, with aftermarket generic earpads which are a bit deeper than the stock ones. Had to add 14db of low shelf boost for these not to sound like a small radio. Removing the felt from the driver's back didn't help much. Besides EQing, are there any tips for...

You can purchase the Waves standalone plugin for windows for very cheap. But you only get three levels of Ambience, and no custom head measures (which I don't believe do much, anyway) If your soundcard/dac doesnt have a 7.1 mode under windows' audio panel, you can make a virtual 7.1 device out...

I find the bass on my Orbit S to bee too much, very tiring and claustrophobic, even at flat/default EQ. They are really good for low volume listening, tho (fletcher-munson effect).

Very intriguing. Have you ever thought about researching this in the university?

Thanks, I'm gonna try this out. Does it approach more of the CMOY, or the Meier method? Is it anyhow different from HeSuVi's crossfeed (which also uses EqAPO)? Thanks!

IIRC, the Audeze needs battery not only to feed the amp circuit, but to make all the command buttons work, and, most importantly, to apply the DSP (EQ) via the presets. If the phone went all powerless passive, the sound would be a lot different. Even when using the 3.5mm input, the analog signal...

Thank you so much. This fixed the upper bass hump that bothered me so much!

Guys, do they sell spare pads for the k371? I can’t find it. If not, it’s not a durable headphone. The pleather will eventually wear out, and i don’t want to use brainwave pads that change the sound.

This fixes it: https://www.reddit.com/r/headphones/comments/hoz3jk/akg_k371361_headband_slippingfalling_fix/

Yes, I watched all of them when they were released. Unfortunately, I can't do anything about it, I guess. The store I bought from won't accept it as malfunctional (my free return period has expired), and I don't believe Harman would pay shipment from Brazil and then send one back because of this...

This is what I had to do to keep the hinge still. Now I can finally hold my phone without worrying about it messing up the adjustment. I can't believe someone designed such a bad hinge design for a headphone made to be used in studios. Now to think about something prettier.

Sure. The adjusting mechanism is too soft/flimsy (sorry, not a native speaker). I set the correct height of the cups for my head, but whenever I grab the phones by the headband (or even by the cups, sometimes) the weight of the cups make the adjustment “slip down”. I would prefer if the clicks...