Search results for query: *
  1. Miiksu

    iFi Audio Pro iESL - The Official Thread

    @etc6849 In terms of sound quality, what do you think is the best: Power tube amplifier or Benchmark? And do u hear any hiss through iESL when using tube amps?
  2. Miiksu

    Schiit Magni Unity - Impressions Thread

    I'm starting to like electrostatics more. I tried a different Ohm setting from the iESL. The good thing is that I can control tonality with it. Every setting sounds so different. 24 Ohm was best for dynamic and electrostatic headphones. Very good clarity without being too harsh. 16 ohm was too...
  3. Miiksu

    iFi Audio Pro iESL - The Official Thread

    @BassicScience Ah now understand. I'm using a tube power amp. I agree that too much current at lower ohms makes a volume pot difficult to use. I have triode mode also that gives half the power and can use pre-amp at high gain. But I prefer the ultralinear sound. It has a more warmier relaxed...
  4. Miiksu

    iFi Audio Pro iESL - The Official Thread

    Thank you. I didn't clearly understand the question. But on my system 24 ohm setting is best. But I don't understand how the bass degrades when you use headphone output. Have you tested all the ohm settings? Distortion with different frequencies may get your brain to think otherwise.
  5. Miiksu

    iFi Audio Pro iESL - The Official Thread

    Probably it does not? Because you can still change the ohm setting and you get different results every setting. Best is to test each setting. It has a big impact on tonality. I just did measurement not long ago and every setting behaved differently and I also heard it very differently. It kinda...
  6. Miiksu

    Schiit Magni Unity - Impressions Thread

    Interestingly it sounded so much different with electostatic. It had less metallic sound and more warminesh or smoothed treble. Not sure if I liked this one the best combo for electostatics. I need to go to the second or third round for e-stats only :)
  7. Miiksu

    Schiit Magni Unity - Impressions Thread

    My good and bad. I'm quite impressed how much I enjoy this little amp. I would say it's better sounding than L30 II. It's not that peaky and I listen to the songs rather than trying to over analyze. There are clear differences between Topping and Schiit. But nothing too big that both would be...
  8. Miiksu

    Topping DX7 Pro - DAC and balanced headphone AMP with ES9038pro and Bluetooth 5.0

    For me: 1) Burson Audio 2) Sparkos 3) Any other cheap op-amp
  9. Miiksu

    Schiit Magni Unity - Impressions Thread

    First impressions. No clipping at high gain! L30II did clip when very low frequencies played. Device is running very cool. It's prettier than the L30 and volume control is better. Gain is little less than L30 but I don't mind that. Also the sound seems more robust with air between the chords...
  10. Miiksu

    Schiit Magni Unity - Impressions Thread

    My Magni Unity (without DAC) coming today. I'm going to use pre-amp feature only. I have already perfect DAC. I want to see if I can hear any differences to L30II and how it perform. I'll do impression on this week.
  11. Miiksu

    TOPPING EHA5 on Apos Audio: Unlock the True Potential of Your Electrostatic Headphones🎧

    @Svperstar I haven't heard or experienced any problems with Ifi iESL. Fully transparent too. It gets expensive also because you need a good stereo amp. My system cost about the same as Phantom. But you get Balanced IN>OUT and can use dynamic headphones. If I could just find used EHA5 somewhere...
  12. Miiksu

    TOPPING EHA5 on Apos Audio: Unlock the True Potential of Your Electrostatic Headphones🎧

    @Svperstar Interesting find. Other Topping offers have some issues and bass heavy situations protection may kick in. You can try this: https://onlinetonegenerator.com/frequency-sweep-generator.html . Sweep 1-20 Hz and see where the problem starts and then use continuous tone for the cause...
  13. Miiksu

    Ambrosia headphone from Nectar Sound

    What amp? Cheap aliexpress perforated angled leather pads have more U-shaped sound. More bass and less midrange.
  14. Miiksu

    NITSCH x Schiit Pietus Maximus Release/Impressions Thread

    Is this amp too veiled and lush sounding with a tube amp? I have quite perfect synergy with Topping DX7 Pro (BA V6 Classic op-amps) > L30 II > Muzishare X7.
  15. Miiksu

    iFi audio's SilentPower Collection: GND Defender, DC Blocker, Nova, and SupaNova!

    @stuck limo @TheAbyss2022 I would like to see measurements that the hum has decreased.
  16. Miiksu

    Ambrosia headphone from Nectar Sound

    Honestly I think the subbass is only slightly rolled off. Treble only when modding but then it's easier for ears. I still love my HiveX but it's very precise and piercing. It has less slam on the bass and a very clean sound, that sometimes I feel it's too light and I just want to crank the...
  17. Miiksu

    Topping DX7 Pro - DAC and balanced headphone AMP with ES9038pro and Bluetooth 5.0

    Samsung QE55Q64RA. I don't know but it only happens with this DX7 Pro. Maybe a bug. Otherwise I'm happy with the DX7 Pro. It's easier to tune sound ur liking when u can do op-amp swap easily. Only the hp output is bad. Not worth ur money. Even L30 II is alot better and only 150eur. Edit. Safe...
  18. Miiksu

    Topping DX7 Pro - DAC and balanced headphone AMP with ES9038pro and Bluetooth 5.0

    My unit does not work well on my Samsung tv via spdif. Audio stutters every second in broadcasts. But Netflix works.
  19. Miiksu

    What should my first Estat be?

    And my measurement. I have made own measurement rig.
  20. Miiksu

    What should my first Estat be?

    Correct. My next hp was better balanced. He got better at making them.
  21. Miiksu

    What should my first Estat be?

    Hive is an older model of the HiveX but Hive has more deep bass, better midrange than SR-L500 but a slightly sharper treble. I have Hive and HiveX. They are about the same but HiveX is a bit smoother at upper frequency and maybe better balanced (At Least my unit was). Also I just noticed that...
  22. Miiksu

    What should my first Estat be?

    It's both. SRM-313 was weaker than my current setup. I can get more volume than SRM-313 with my tube amp. That is just a limitation for some really bass heavy songs. My current tube amp is around 50W. But tubes help soften sharp treble. Of course they never sound clean and dry as solid state...
  23. Miiksu

    What should my first Estat be?

    You can lower treble few db easily with steel mesh front of the driver and still keep frequency response smooth. On bass heavy songs you may not get desired sound level. Dynamic and planar you can get more volume until the sound gets very distorted.
  24. Miiksu

    What should my first Estat be?

    My first amp was SRM-313, it was around 500 euros and I still have it. I loved it until I started to want more. Then I started to google different solutions and I jumped into the unknown area. I decided to get the Ifi Audio Pro iESL and it was expensive for my wallet and then I also got a...
Back
Top