A tip for iOS users - I managed to update my UTWS3 firmware the other day with my Sony TV running Android TV by sideloading the app using ES File Explorer and Sideload Launcher. It was a bit of a mission, but worth looking into - it was the only Android device that I had access to - everyone I...

True. That being said, I did struggle to get the pads on and off with the stock rings, it's a bit of a finnicky system. Even worse with my new pads because I had to fight with excess material on the back of the pads interfering with the clips - a lot of people have to cut some of the excess...

Yea no worries. I just replaced my stock pads with sheepskin pads from YDYBZB - had to take out the plastic rings from the old pads to fit the new pads. Was just thinking maybe that might be a solution to use the Panda pads on the PM3. It's a shame that they don't fit straight out of the box...

Hrm, what a shame. Would there be any way to take the plastic backing ring off the Panda pads and replace them with the PM3 backing ring?

FYI, Drop are now selling earpads for the Pandas. https://drop.com/buy/drop-earpads-for-panda-wireless-headphone#overview Looking at the photo that someone posted in the discussion on the page, the mounting clips on the Panda look the same (identical?) to the mounting system on my PM3s...

They have a 0.78mm recessed port. I’m using the OE adapter and the MMCX UTWS3. This is what they look like with the CIEMs in their normal orientation. Have to rotate them 90 degrees to fit in the case, and even then they barely fit. Not a big deal, just something to look out for for those...

I'm using the OE adapter, ordered directly from their website: https://www.oeaudio.net/product-page/mmcx-to-ciem-adapter Took about ~3 weeks to deliver over christmas China to Australia. As far as I can tell it has little to no impact on the fit of the UTWS3 around my ear, I don't notice it at...

Same here, been using it on a number of calls today and have had no complaints.

Finally got my pair in the mail via AliExpress, took over 4 weeks from China, ugh. First impressions, my 5BA CIEMs barely fit, be very careful with bigger iems. I have to spin them around the MMCX connector to fit them flush with the sides of the case. Good thing I got the MMCX version with...

I have the same question, how do you update the firmware if you don't have an android device?

Found this first look from hifigo.

You can get stick on qi receiving pads that have a USB C pigtail: https://www.amazon.com.au/Wireless-Charging-Receiver-Nillkin-Charger/dp/B01M11UT3V Likely much easier than trying to take the case apart and mod something internally. Stick the pad on the bottom of the case and plug it into the...

Sweet. Put an order through on Aliexpress and bought the OE 2 pin to MMCX adapter to adapt to my AAW CIEMs. Keen. Should turn up in early Jan which is fine by me because of Christmas.

Thats a shame! Can you tell me what the dimensions / length of the pins are? Otherwise might have to look at getting the MMCX version and use with the OE audio 2 pin to mmcx adapter.

There are a few photos of the 2 pin version on weibo, doesn't look like it will support a recessed 0.78mm 2 pin socket. Can you confirm that it will or not?

Does anyone have a recommendations on a good cable for IEMs with recessed 2 pin (0.78mm) sockets? I was going to grab the Kbear Rhyme for my AAW CIEMs, but doesn't look like the 2 pin connectors will work well with the recessed socket? The Null Audio cable that I have has failed at the jack end.

Messaged Fiio customer support and they said they are hoping to launch the UTWS3 by the end of the month. Keen.

I noticed that too, from the Mad Dog Pros, they needed more juice from the Corda Classic than my HE400is (2 oclock versus 12 oclock), but the Alpha Primes seem more efficient (10 oclock versus 12 oclock), interestingly! They also isolate noise far better than the Mad Dog Pros, which is awesome...

Yea fair, I just don't have the skill or dexterity for it haha. All done, not the cleanest job in the world, just a heatshrink y split, but it'll do until my cable comes. Now for the music! :D   Initial impressions are very positive (confirmation bias much?) coming from the Mad Dog Pro. Sound...

  Yea, they're already built cables, so all i'll be doing is cutting off a length of cable from the hirose connector side and splicing them into the 3.5mm connector side (ie making a y split), shouldn't be too hard. I've attempted to make my own cable with the hirose connectors and they're a...

Upgraded from mad dog pros, so they should have come with cables, sent an email into MrSpeakers, probably just an oversight, no worries. I didn't send my old ones in, lucky I've got two pairs of single entry cables, so my job tomorrow is to hack them together into a dual entry cable, shouldn't...

Just got my Primes :D Pretty! Buuttttttt no cable in the box :(

  Awesome, thanks :)

What sort of turn around time for the upgrades should we be expecting? I haven't heard anything, and my tracking number says it arrived at MrSpeakers 2 weeks ago.... o.O

For sure, can't wait to get mine back!   What I meant was when they say they need a sales receipt included in the box, I don't think it's the sales receipt for the original pair of headphones (as Jayzz seems concerned about, as he wouldn't have the original receipt for the headphones if he...