Search results for query: *
  1. derbigpr

    post your grado mods....

    Does anyone here own G-cushion pads (preferably still in perfect shape) and could measure out the exact dimensions of them, as accurately as possible? I can't seem to find that info anywhere. The exact dimensions I'm talking about are in the picture, looking at the pad from a profile: Thanks!
  2. derbigpr

    Why the Beats Hate?

    The whole "beats suck" thing was blown way out of proportion even back when they weren't really all that good, truthfully they were never as HORRIBLE as some people made them out to be, they were just very overpriced at first, but the 2nd and especially the 3rd generations of Studio's and Solo's...
  3. derbigpr

    Grado Modders Go Ypsilon (Elleven Acoustica drivers and builds thread)

    Did anyone try this wooden Audeze-like setup with different pads instead of original Audeze ones?   What are the exact measurements of the Audeze pads earpad opening, how deep is it in the front, how deep on the rear?
  4. derbigpr

    3D printed closed headphones with HD800 driver

    I worked on something very similar to this, trying to put a driver that is usually inside open headphones into a closed back one with custom made baffle and cup, very similar to what you have here. Inherently wrong for many reasons, one of the main ones is that drivers which work specifically in...
  5. derbigpr

    Grado Modders Go Ypsilon (Elleven Acoustica drivers and builds thread)

        Wow that's impressive if they're on the level of high end drivers from big manufacturers.       Nhoords have 3D printed grills if I'm not mistaken, so it's hard to get a nice fillet on an edge with that.   Will you maybe install the Epsilon R1 into that Audeze headphone that you...
  6. derbigpr

    Grado Modders Go Ypsilon (Elleven Acoustica drivers and builds thread)

        When you say best mids you've heard,you mean out of the Grado aftermarket drivers,  or including the stock Grado drivers like the ones in the PS500, PS1000, GS1000, RS's, etc.?
  7. derbigpr

    Grado Modders Go Ypsilon (Elleven Acoustica drivers and builds thread)

        Is it totally acoustically transparent?  I just realized I could probably use that  materials that's used for speaker grills. It's a bit thick, but it should be perfectly transparent and not change the sound at all.
  8. derbigpr

    Grado Modders Go Ypsilon (Elleven Acoustica drivers and builds thread)

    Hey guys, I have a question not directly related to the Ypsilon driver, but the filter that should be in front of the driver. I'm talking about that totally transparent fabric that can be stretched over the front of the driver and block the holes, so that dust or hair doesn't fall in. Does any...
  9. derbigpr

    Grado Modders Go Ypsilon (Elleven Acoustica drivers and builds thread)

    Just a question...are the new S2 and R1 drivers slightly thinner than the first version?  They're 46x8 mm right? Old was 46x9mm if I'm correct.
  10. derbigpr

    Grado Modders Go Ypsilon (Elleven Acoustica drivers and builds thread)

    Oh yeaah, let us know how the R1 compares to regular ones as soon as possible. :P
  11. derbigpr

    [DIY MOD] Upgrading DT770 with 50mm Tesla drivers and reworking internals

    Are these drivers actually any good? I mean they look similar to T1 ones, but do they sound considerably or any better than stock DT770 drivers?
  12. derbigpr

    Grado Modders Go Ypsilon (Elleven Acoustica drivers and builds thread)

        Can you compare the overall sound to any other headphones? Where would you rank them....like under 500, 500-1000 or over 1000 dollar category?
  13. derbigpr

    Grado Modders Go Ypsilon (Elleven Acoustica drivers and builds thread)

      I presume this means they have great bass extension and punch as well, since most 90's music was dependent on that? :P
  14. derbigpr

    What amplifier to get around 100 dollars?

        Yes, there is no point in amplifying a signal that comes out of a bad sounding source. You'll make it louder of course, but that's about it. On top of it, you'll 99% certainly have ground loop issues, as is almost always the case when connecting low end sound cards to external...
  15. derbigpr

    What amplifier to get around 100 dollars?

          If gaming is important to you, then get a sound card.  Something like the Asus Essence ST or STX will do a FAR better job at powering those headphones than any external entry level amplifier anywhere near the price will. You can get used cards like that for far less than 100€, and...
  16. derbigpr

    What amplifier to get around 100 dollars?

          MF V-Can 2 and Project Headbox S are both great amps for the money, nothing wrong with them, it's just that almost nobody in the US heard of them let alone used them.
  17. derbigpr

    Beyerdynamic DT 1990 PRO // DT 1990 PRO MK II -- Impressions Thread

        You've been sleeping for the past few weeks, haven't you...? :P   Those Focals have the most advanced drivers ever put inside a headphone, and most importantly, take a different (and right) direction in designing headphone drivers from ground up.  Their diameter is irrelevant, the design...
  18. derbigpr

    Grado Modders Go Ypsilon (Elleven Acoustica drivers and builds thread)

        Aren't they quite tricky in terms of the cable thickness? I was thinking about using them instead of mini-xlr too, but what bothers me is that I won't be able to solder a cable into them.
  19. derbigpr

    Grado Modders Go Ypsilon (Elleven Acoustica drivers and builds thread)

        Are those the hifiman connectors?
  20. derbigpr

    Grado Modders Go Ypsilon (Elleven Acoustica drivers and builds thread)

      You have to unscrew that plastic cover on the back of the baffle that you can see on the picture I posted, 4 screws. Carefully because the cable is glued in the hole that goes through that cover and there's very little slack on the wire inside, so if you pull it off, you might rip the PCB...
  21. derbigpr

    Grado Modders Go Ypsilon (Elleven Acoustica drivers and builds thread)

        They're precised almost exactly the same (like half a pound more expensive for mk2) on the european spare parts store, so I doubt they're better, they just have a bigger baffle to fit inside the bigger cup on the mk2, hence the slightly higher price for a bit more plastic, but exactly same...
  22. derbigpr

    Grado Modders Go Ypsilon (Elleven Acoustica drivers and builds thread)

        Told ya, they're super cheap drivers considering they come in a almost 400 dollar pair of headphones.   The only fault is that they come built into the assembly, so it's a problem to extract the driver itself out of the assembly because it's glued onto the baffle, and the whole driver...
  23. derbigpr

    Grado Modders Go Ypsilon (Elleven Acoustica drivers and builds thread)

    ...approximately how to deal with all that stuff. But if someone tries I'd be happy to see some measurements so we can see which effects exactly it has on the sound. I just know from experience that tuning closed back headphone is a son of b**ch and the slightest change can totally mess up the...
  24. derbigpr

    Grado Modders Go Ypsilon (Elleven Acoustica drivers and builds thread)

        The tricky part about using different drivers is the fact that they're all different in shape and all have special ways of attaching to a baffle. Luckily Ypsilon driver is a nice even shape 46+9mm, so it's easy to glue it, pressure fit it or secure it with screws, but other drivers from...
  25. derbigpr

    Grado Modders Go Ypsilon (Elleven Acoustica drivers and builds thread)

      Your countries official Sennheiser website should have a link to a support page or spare parts page. If not just send them an email and ask for a spare part.   Here's the UK version of the site: http://headphonespares.sennheiser.co.uk/  It can also take you to their professional headphone...
Back
Top