Recent content by nikko510
-
N
New Audio-gd R-7, R-7HE R-8, R-27, R-27HE, R-28 Flagship Resistor Ladder DACs and DAC/amps
I have never met such a manufacturer of equipment with such good contact and help as Kingwa. Whenever I had a problem, he tried to help me as soon as possible. This is a very big plus for me. The sound is very good, technically well built, and the appearance is of secondary importance to me.- nikko510
- Post #10,648
- Forum: High-end Audio Forum
-
N
Master Clock Talk
You can write what you want, but in my system the OCK-2 does a very good job. My daughter just needs a few sounds and in a blind test she will immediately indicate the plugged in clock. I have three inexpensive clocks and I do not regret the money spent on them, each of them brings something...- nikko510
- Post #2,020
- Forum: Dedicated Source Components
-
N
Master Clock Talk
I have to admit that the Telegartner cable is quite good, the first listening session left quite a good impression. In my free time, I also made the 75 ohm CL2 cable proposed here on the forum. Although the cable is quite well built, because it has a double copper shield + aluminum foil, the...- nikko510
- Post #2,000
- Forum: Dedicated Source Components
-
N
Master Clock Talk
I'm not sure, but my gut tells me that Alvin is not the manufacturer of these clocks, rather just a dealer.- nikko510
- Post #1,999
- Forum: Dedicated Source Components
-
N
Master Clock Talk
Yes, I agree with you, but the equipment produced now, especially in China, has mostly 50 ohm clock inputs. In my opinion, if someone sells a standard clock with 50 ohm settings, there should also be 50 ohm sockets for logic. Kingwa definitely uses 50 ohm sockets as standard, unless someone...- nikko510
- Post #1,994
- Forum: Dedicated Source Components
-
N
Master Clock Talk
Theoretically, if it is sold as standard with 50 ohm settings, and as you know, most equipment has 50 ohm clock inputs, then 50 ohm sockets should be mounted in the OCK-2. It seems to me that there should be 50 ohm sockets, but I could be wrong.- nikko510
- Post #1,992
- Forum: Dedicated Source Components
-
N
Master Clock Talk
I am very curious, what sockets does the OCK-2 clock have? The Gustard C18 should be 50 ohms.- nikko510
- Post #1,990
- Forum: Dedicated Source Components
-
N
Master Clock Talk
Telegartner 141 cables with plugs made, very easy to assemble - it went quickly. Technically quite good performance, much better in my opinion than the Gustard C2 cable and the cable included with the LHY. Finally, an all-50 ohm cable with non-magnetic plugs. Unfortunately, there is no time to...- nikko510
- Post #1,988
- Forum: Dedicated Source Components
-
N
Master Clock Talk
The entire housing of Telegartner plugs is made of brass, covered with a thin layer of nickel. The cable is Semi Flex .141 from the same company, the one shown in the photo looks like metal.- nikko510
- Post #1,981
- Forum: Dedicated Source Components
-
N
Master Clock Talk
Telegartner manufactures 50 ohm BNC plugs that are non-magnetic. When I have time, I will make cables on these plugs and a 50 ohm cable, then I will compare with other cables.- nikko510
- Post #1,977
- Forum: Dedicated Source Components
-
N
Master Clock Talk
I made a second longer BNC cable for DI20HE. I don't know if the silver plugs are as good or the silver wire, maybe both. Both new cables are unbaked and are 75 ohms, yet they are far superior to all my 50 ohm cables. There is even better separation, better decay of instruments and clarity. It's...- nikko510
- Post #1,976
- Forum: Dedicated Source Components
-
N
Master Clock Talk
Finally, after great effort, I managed to make a 75 ohm cable on a silver conductor - in a double braid. I had a huge problem with the confection of my best plugs, they did not fit the cable at all, and in addition they had a lot of parts that had to be drilled. As you can see, I had plugs for...- nikko510
- Post #1,962
- Forum: Dedicated Source Components
-
N
Master Clock Talk
I had problems with the LMR400 50ohm cable bought on aliexpress. I disassembled this cable and please see what the pins on the plugs look like. Not only that, the middle aluminum cable itself, which is covered with copper, is of similar quality - a massacre. It is better to make BNC cables...- nikko510
- Post #1,953
- Forum: Dedicated Source Components
-
N
Master Clock Talk
I found 75 ohm BNC plugs that were only made for the military. They are entirely non-magnetic and very heavily silver plated. Are these plugs suitable for making a 75 ohm clock cable?- nikko510
- Post #1,951
- Forum: Dedicated Source Components
-
N
New Audio-gd R-7, R-7HE R-8, R-27, R-27HE, R-28 Flagship Resistor Ladder DACs and DAC/amps
This is exactly how it is to get the maximum out of the Audio Gd equipment, we need about 4 hours of warm-up time, there is no other way.- nikko510
- Post #10,342
- Forum: High-end Audio Forum