Gustard Amplifiers and DACs
Sep 17, 2016 at 11:54 AM Post #586 of 605
Can anyone give me a comparison between the x20 and x12? Does the x20 allow opamp rolling?

Also, it would be great if I can get a comparison with the Aune s16


Well, they are both DACS so I don't think you'll be doing much opamp rolling.
 
Sep 17, 2016 at 4:27 PM Post #587 of 605
Meanwhile Gustard is presenting new model Gustard A20H, fully balanced with double AK4497 chips, discrete amplifier and so on.
 
All inputs support DSD:
IIS supports DSD64、DSD128、DSD256、DSD512
SPDIF、Optical、AES/EBU supports DSD64 (DOP);
USB supports DSD64、DSD128、DSD256; 
 
Here is few pictures of upcoming release:
 
 

 
 

 

 

 


 

 

 

 

 

 

 
Sep 18, 2016 at 8:55 AM Post #588 of 605
  Meanwhile Gustard is presenting new model Gustard A20H, fully balanced with double AK4497 chips, discrete amplifier and so on.
 
All inputs support DSD:
IIS supports DSD64、DSD128、DSD256、DSD512
SPDIF、Optical、AES/EBU supports DSD64 (DOP);
USB supports DSD64、DSD128、DSD256; 
 
....

Nice!!! A cool piece of gear for me to try out this winter!
 
Sep 24, 2016 at 6:42 PM Post #590 of 605
When I connect my X-12 to my computer (running windows 10) via the USB, the computer does not recognize the DAC. Do I need to download additional drivers?
If so, where do I go for the download/
Thanks.
 
Sep 24, 2016 at 7:30 PM Post #591 of 605
Hi
 
You need to download windows XMOS USB 2 drivers
Apparently Windows 10 anniversary now has built in USB 2.0 support but I have not tried this
 
This is the Tabao Gustard site - Chinese
https://world.taobao.com/item/18012850492.htm?fromSite=main&spm=a312a.7700824.w4002-620452546.23.gzQGpy
 
The Windows 10 driver (v3.20) can be download from here
http://pan.baidu.com/s/1V7oJG
 
Once loaded click on the download icon on the top row (slightly right off centre)
Then click the left hand button in the pop up for acceptance
 
Dec 24, 2016 at 7:19 PM Post #596 of 605
I think more important thing is the maximum input voltage if your power amp.
The input impedance of amp is quite high so that output impedance us not a problem.
 
Dec 24, 2016 at 8:23 PM Post #597 of 605
I am not an electrical engineer but after reading this
https://forum.audiogon.com/discussions/how-to-match-preamp-and-power-amp
It seems that matching an amp to a preamp is important. I did discover that the output impedance of the x20 is 100 ohms.
 
Dec 24, 2016 at 8:33 PM Post #598 of 605
The matching impedance is for very high frequency signal that the wave length is comparable to the size of electronics.
The audio is very long wave length so that it is irrelevant to the matching.
There is some myth on this world.
The input impedance of the amplifier more than several kilo ohms, which is far higher than that of the output impedance.
Only concerns might be that the higher swing of the preamp will clamp the signal, and the the sound will be muddy.
In general, the matching might be something not for the impedance but something other like harmonic sensitivities / transmission / as regarding the power amp as seen as filter.
X20 has volume control and will be matched well to your amp.
 
Merry Christmas.
 
Jan 3, 2018 at 9:49 AM Post #600 of 605
Anyone got a Gustard X9 they were looking to sell? I have feedback here on Head-Fi and am in the US.
 

Users who are viewing this thread

Back
Top