Better Sound Card for better Digital Out for DAC? is there any difference between sound cards, for Digital Output? I want to upgrade sound card, but am just wondering is there a great improvement on Asus Xonar or M-audio

yup, I just saw it a 3Amp 250V fuse, thanks , case close

my mistake gonna change to US power cable

currently my darkvoice UK power cable is fused, would like to change to US power cable, hence there will be no fuse question" is it safe to run fuseless?

Quote: Originally Posted by FallenAngel "Sufficient bass"? I always thought the MS1 was a fairly warm headphone, you aren't likely to change it from what it is. Are you already using flat pads? Uhmm put it this way, I want it warmer

Recommend: cable for Headphone any good and cheap cables for a MS1 that can provide sufficient bass

uhmm how do I reduce the gain?

noob question : value of potentiometer for lower volume? I currently use a 100k pot in my cmoy, if I want to reduce the volume by default , should I reduce pot to 20k? or increase? help a noob

Quote: Originally Posted by DefectiveAudioComponent And you have made sure it's not the cable? open circuit at the driver side

my HD1000 driver is dead.... I have contact sennheiser and do not have spares... any idea I can get a spare driver

Quote: Originally Posted by Snicewicz Edit: I was wrong didnt watch the whole video didnt see the part at the end with them around her neck. From the first part with the phones on I though they were ATH-W100 almost similar ATH-W100, any more help?

help identify : orange retro looking headphone found in MTV , it looks like a panasonic RP-HTX7 thanks in advance, if anyone knows what brand/model is it YouTube - Kimura Kaela - happiness!!!

any1 have such problem with their 337? I can hear radio station signal station when music is low volume, and is even louder when no music and volume knob is '0', I plug out the RCA input cable and there goes the radio station signal. I have swap/change rca cables, taralabs to diy beldens...

Quote: Originally Posted by dvw Did the amp ever worked before without any RFI? It is possible that the connector on th amp is defective. Normally for the coax cable to work and shield RFI. The external shield needed to be grounded. The shield on the cable is grounded to the cable's...

is it the RCA cable acting as an atenna for the darkvoice 337 amp? although removing RCA removes the Radio signal, other cables like taralabs which I borrowed also have such problem

a line out will make it perfect... does it have?

Quote: Originally Posted by sejarzo What sort of RCA cable construction--coax or shielded twisted pair? using Nanotec Golden Strada #201: Dual Core Shield Cable

Quote: Originally Posted by dvw I think you have ground loop. Does the noise sounds like a hum? not hum, radio station signal

RFI noise interference with RCA cable, should be the root cause, since I took them out of the amp and no more noise/radio signal I know there are things ferrite rings, but what else? another shield on top?

Quote: Originally Posted by Mazuki I experienced this with the ASL MG Head OTL that I had a couple of years ago. You probably just need to move it a bit. It really was the RCA cable...I shift it lower and it works, if It hang on the air the 337 became a radio

does any1 have a this problem with the 337? I could receive radio broadcasting from the 337 when there is no signal from my cd transport? I plug out the rca source, there is still radio music I could hear them when music is playing, is like some noise, because the DJ was talking It is...

a noob question, is it ok to try any tubes? trial and error? if it works, good, if it doesnt will it damage amp?

Quote: Originally Posted by d-cee something mellow, maybe the OPA2604 or OPA 2107 uhmm the factory gave OPA2604, would OPA2107 gives a same characteristic?

Quote: Originally Posted by d-cee i think Fubar has opamps that you can roll but as mentioned already, if it's in the recording it'll probably come through unless your amp/player/headphones are heavily coloured btw what headphones are you using? opamp rolling, what are...

well I do not have a CDP yet, but a FubarIII, there are some CD that I cant always face sibilance could any1 recommend a CDP and DAC, so I can just drop by at the store to test selectively.... rather than testing everything thanks in advance