[AbortedBox]

Got that package today. Thanks Louie. I went right to the Ti,built a single coil and figured 30w was low enough to dry burn. I was wrong. Oxidized immediately. So I put that away for now and built a dual nickel. Was using the nickel in Ti mode *whoops*. So I said screw TC for the time being and threw in dual claptons. Work great,been using it around 50-70w. Is this the UD Clapton wire? It's quite good. You also threw in some MBV,not my favorite but will do good when I need a nicotine fix,12mg is what I run when I wanna lay back on the clouds and go lower watts. What kind of cotton is this? It's quite good. The last Jap cotton I used was horrible so I switched to Native Wicks but this stuff seems to be wicking great. Anything else hm. That's all for now.

 

[lugnut]

  no tips really.  i've only found 2 companies that i really like so far.  Texas Rebel and Elix Vapor.  both are very reasonably priced.  Elix Vapor's service is the worst tho so i won't even buy from them anymore.  buy you can get 150ml from them for $20 and i've tried 5 of their flavors and they are delicious.  i just ordered a sample pack from Texas Rebel yesterday and they run 20-30% off sales quite often. 
 
but yah man.  seems like everything in europe is more expensive. 

I finally tried Texas Rebel Juice. I could not find any coupons or free shipping for my order so I paid higher prices than what I am use to.Shipping was extremely slow, 10 days. The juice was good right out of the bottle. I look for three things with juice sellers, price, shipping time and quality. Rebel done good on the quality. I will buy from them again if, I catch a sale or a good coupon and don't need the juice right away.

 

[paradoxper]

  I finally tried Texas Rebel Juice. I could not find any coupons or free shipping for my order so I paid higher prices than what I am use to.Shipping was extremely slow, 10 days. The juice was good right out of the bottle. I look for three things with juice sellers, price, shipping time and quality. Rebel done good on the quality. I will buy from them again if, I catch a sale or a good coupon and don't need the juice right away.

What did you end up getting? Check out their FB for codes galore. And you'll have to get use to the
processing times. Usually 5-8 business days. That can extend with their 40-50% codes which happen way too often.

 

[lugnut]

  What did you end up getting? Check out their FB for codes galore. And you'll have to get use to the
processing times. Usually 5-8 business days. That can extend with their 40-50% codes which happen way too often.

I bought twinkie and zinger and they are both good, would buy the twinkie again. I would love to find some 40% off deals, I do not have a facebook account. Can I still get the codes, I did look no luck. Shipping I can live with if I can get the price down.
I wonder if they just ship one day a week and do all the orders at one time ? But yes I can say their juice is a quality product !

 

[paradoxper]

  I bought twinkie and zinger and they are both good, would buy the twinkie again. I would love to find some 40% off deals, I do not have a facebook account. Can I still get the codes, I did look no luck. Shipping I can live with if I can get the price down.
I wonder if they just ship one day a week and do all the orders at one time ? But yes I can say their juice is a quality product !

I know Twinkie is one of the bat**** flavors, people love that stuff. I'll PM you codes.
 
And no, they process juices about 7 days a week, but as said, they're a really active company so they're doing
a lot of orders.

 

[Raguvian]

Bought three more mech sauce flavors today. I also tried the Kettlehead flavor in the Bellus a few days ago... great flavor. I really liked it. I'll have to try it again in my RDA with a new build/wick on it to see how the taste compares to the Bellus. Right now I'm trying to finish off Pumpkin Face. It's almost unvapeable in the RDA because the flavor is way too strong but the tank mutes it a bit and makes it tolerable (or it's just steeped into something not horrible). I still have to try Goopy.
 
I really want to try the new flavors in the tank to see if the max VG juice is causing the occasional dry hit in the tank.

 

[AbortedBox]

Bought three more mech sauce flavors today. I also tried the Kettlehead flavor in the Bellus a few days ago... great flavor. I really liked it. I'll have to try it again in my RDA with a new build/wick on it to see how the taste compares to the Bellus. Right now I'm trying to finish off Pumpkin Face. It's almost unvapeable in the RDA because the flavor is way too strong but the tank mutes it a bit and makes it tolerable (or it's just steeped into something not horrible). I still have to try Goopy.

I really want to try the new flavors in the tank to see if the max VG juice is causing the occasional dry hit in the tank.

I just ordered some Pony Porn from Mech sauce,what did you get?

 

[bccass]

Put down your drippers, pack away your spools of wire.  I have been using the TFV4 for a couple of weeks now, and I am done rebuilding.  I was super addicted to rebuilding, did the whole DNA thing with the ZNA and then ni-200 with the Flask.  Got the SX Mini M when it came out, mainly used the troll and derringer.  Bought the lowpro, and because I knew it would be a PITA to build, I picked up the TFV4 mini.  
 
Now I have been converted.  I've tried a few of the coils for the TFV4, Quad, Triple, Sextuple... but the best is the Clapton. I've put everything away, stopped wasting my time playing with wires.  And I was pretty addicted (and good, if I say so myself) at making coils.

 

[luberconn]

Got that package today. Thanks Louie. I went right to the Ti,built a single coil and figured 30w was low enough to dry burn. I was wrong. Oxidized immediately. So I put that away for now and built a dual nickel. Was using the nickel in Ti mode *whoops*. So I said screw TC for the time being and threw in dual claptons. Work great,been using it around 50-70w. Is this the UD Clapton wire? It's quite good. You also threw in some MBV,not my favorite but will do good when I need a nicotine fix,12mg is what I run when I wanna lay back on the clouds and go lower watts. What kind of cotton is this? It's quite good. The last Jap cotton I used was horrible so I switched to Native Wicks but this stuff seems to be wicking great. Anything else hm. That's all for now.

 
cool man.  glad you're enjoying!  ya, temp builds are a bit finicky.  took me several tries to get it right.  i didn't even bother with pulsing TI or NI. but if you're pulsing, you only need like 7-10 watts.  i just waited till i got cotton in it, juiced it up and checked for vapor.  then mess with temp settings to where it doesn't cutt off power all the time.  there is a curve you gotta learn with the resistance in relation to the power and temp setting.  i'm happier just using straight kanthal and wattage mode. 
 
yes, that clapton is the premade UD wire.  it is pretty nice to have it on hand.  it was like $10 for 25ft.
 
here is the cotton i use.  it's cheap man.  that pack will last me years probably.  it does work pretty well.
 
http://www.amazon.com/gp/product/B00MYXSRAQ?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s00

  I bought twinkie and zinger and they are both good, would buy the twinkie again. I would love to find some 40% off deals, I do not have a facebook account. Can I still get the codes, I did look no luck. Shipping I can live with if I can get the price down.
I wonder if they just ship one day a week and do all the orders at one time ? But yes I can say their juice is a quality product !

yah man.  i used a 30% off coupon last week and ordered a sample pack.  twinkie and zinger were included in my selection.  i should get it this week.  shipped out last Friday.  i think their shipping just depends on how busy they are.  a month ago i made an order from them and it took a week before i got an email saying it had been shipped out.  this last order i got an email saying it was shipped and it only took 2 days.  probably has to do with what specials they are running.  the order that took longer, they had a 40% off deal going on, so probalby more orders were placed than when the 30% was going on. 

 

[Raguvian]

I just ordered some Pony Porn from Mech sauce,what did you get?

 
I bought 30 ml bottles of Orange River, Schwartz Doom Pie, and Vampire's Lust.
 
Really tempted to try out the Kettlehead in the RDA tonight but I'm trying to force myself to finish Pumpkin Face first so I don't add to the collection of stuff I'll never finish.

 

[TrollDragon]

  Put down your drippers, pack away your spools of wire.  I have been using the TFV4 for a couple of weeks now, and I am done rebuilding.  I was super addicted to rebuilding, did the whole DNA thing with the ZNA and then ni-200 with the Flask.  Got the SX Mini M when it came out, mainly used the troll and derringer.  Bought the lowpro, and because I knew it would be a PITA to build, I picked up the TFV4 mini.  
 
Now I have been converted.  I've tried a few of the coils for the TFV4, Quad, Triple, Sextuple... but the best is the Clapton. I've put everything away, stopped wasting my time playing with wires.  And I was pretty addicted (and good, if I say so myself) at making coils.

 
Hope you can still get coils after the FDA regulations are in place. Lots of folks are loading up their Vapocalypse stash, gearing for the worst.
 
So I wouldn't abandon all those drippers yet, also get yourself a couple of good mechs to boot.

 

[bccass]

The government isn't going to make it illegal, and they won't do anything immediately.  But expect to get taxed.  Badly.  They want their delicious, delicious tax money.
 
And they can't tax a chip that modulated power, then there would be a tax on the wall warts, computer power supplies, and cell phone car chargers.  Making it into a device and selling that device is where things could get interesting... but that's what 3d printers are for.

 

[luberconn]

i got that nextgen clone last night. it's a handsome tank.  put 2 builds on it so far.  really wasn't hard to build or i just got lucky.  first i used 26ga and i think it was a bit too much.  5wrap came it at .6ohm. got burnt taste if i went past 20w or so.  the coil and mesh got really gunked up.  i've gotten burnt hits with cotton and kanthal but never saw it gunk up like it did on the nextgen with mesh.  it was pretty gross.  it actually covered the brass lock nut completely black.  so i took that off and did a 30ga 1.15ohm build and it's working much better.  it gives a nice clean vape with restrictive air flow.  i was expecting that tho.  overall, i would say i like it, but don't love it.  flavor is there, but not in your face like the aromamizer RDTA.  i like the fact i can vape 15-20w with it and the juice and battery last a really long time.  i will be keeping it, but the aromamizer still remains the tank king in my book. 
 

 

[skalkman]

  i got that nextgen clone last night. it's a handsome tank.  put 2 builds on it so far.  really wasn't hard to build or i just got lucky.  first i used 26ga and i think it was a bit too much.  5wrap came it at .6ohm. got burnt taste if i went past 20w or so.  the coil and mesh got really gunked up.  i've gotten burnt hits with cotton and kanthal but never saw it gunk up like it did on the nextgen with mesh.  it was pretty gross.  it actually covered the brass lock nut completely black.  so i took that off and did a 30ga 1.15ohm build and it's working much better.  it gives a nice clean vape with restrictive air flow.  i was expecting that tho.  overall, i would say i like it, but don't love it.  flavor is there, but not in your face like the aromamizer RDTA.  i like the fact i can vape 15-20w with it and the juice and battery last a really long time.  i will be keeping it, but the aromamizer still remains the tank king in my book. 
 

I'm using both my nextgen and nextiny at 25-30w without a hint of dryness. 200sf mesh with 6-7 wraps of 20g Ni80.  

 

[luberconn]

  I'm using both my nextgen and nextiny at 25-30w without a hint of dryness. 200sf mesh with 6-7 wraps of 20g Ni80.  

 
20ga?  that must be a typo.  or is it?  i did the 200 mesh core and 400 at the very top.  i have yet to try any nichrome 80.  that may be my next venture.  i should be getting that k.loud+g clone here real soon too.  i am enjoying the nextgen, but it's deff more of a mouth to lung atty.