Vali 2 tube rolling
Jan 24, 2023 at 12:00 AM Post #6,151 of 6,436
The 7AF7 has a slightly lower amplification factor of 17 (versus 20 for the 7N7 / 6SN7). Couldn't really tell a difference in my system....volume levels seems to be the same between the two.

(note the GE was made by Sylvania....I haven't had a stroke or anything :slight_smile:)
7AF7s Marconi GE Syl.jpg
When i was cleaning the pins on my frankie I "accidentally" cleaned the GE logo off the tube too - I mean, it couldn't hurt, could it?
So, the accepted wisdom is the pretty much all 7N7 are either Sylvania or NU. Does the same hold true for 7AF7?
 
Jan 24, 2023 at 12:26 AM Post #6,152 of 6,436
When i was cleaning the pins on my frankie I "accidentally" cleaned the GE logo off the tube too - I mean, it couldn't hurt, could it?
So, the accepted wisdom is the pretty much all 7N7 are either Sylvania or NU. Does the same hold true for 7AF7?
Yes. NU and Sylvi. And to my careless eye, the round plates in the 7AF7 are similar to the round plates in the 7A4, except the plates in the 7A4 sound better. :beyersmile:
 
Jan 24, 2023 at 12:38 AM Post #6,153 of 6,436
When i was cleaning the pins on my frankie I "accidentally" cleaned the GE logo off the tube too - I mean, it couldn't hurt, could it?^^
So, the accepted wisdom is the pretty much all 7N7 are either Sylvania or NU. Does the same hold true for 7AF7?
^^ Without the GE logo, the tube has to be worth more!! (try it on EBay!…😜)
 
Feb 20, 2023 at 2:10 PM Post #6,154 of 6,436
Etching on tube says: R2A3
with a line over it that is sort of:

/Li

though the L is more a right angle and the i, is who knows.

Not good at uploading pics but I have a structure that looks like a typical 6dj8, with a solid silver thin disc getter,. Supported by one wire on the side, but not the Soviet style disc that looks like a UFO ... this is flat with ~8 dimples around the edge.

Two mica with dimples around each, no markings, gold pins, looks newer.

Top flashing comes down low and hides the most of the getter.

Anyone recognize this with their Vali?
 
Feb 23, 2023 at 8:39 PM Post #6,155 of 6,436
@inmytaxi, a pic would be really helpful. If you are you using it straight up in the Vali 2 without an adapter, it's a 6922/6DJ8 or a drop in replacement.


Where we at Vali 2 spankers???

Nobody spanks the Vali 2 anymore 😥

Well, I am!!! Fitted her with a delicious Ampy 12AT7 tonight. Spanking some Ultrasones. Great detail all around. Good Times!! Cheers!!! :beerchug:

Amperex 12AT7 (1).jpg
Vali 2+ & Ultrasone PRO 1480i & Amperex 12AT7 (2).jpg
 
Feb 23, 2023 at 9:37 PM Post #6,156 of 6,436
@inmytaxi, a pic would be really helpful. If you are you using it straight up in the Vali 2 without an adapter, it's a 6922/6DJ8 or a drop in replacement.


Where we at Vali 2 spankers???

Nobody spanks the Vali 2 anymore 😥

Well, I am!!! Fitted her with a delicious Ampy 12AT7 tonight. Spanking some Ultrasones. Great detail all around. Good Times!! Cheers!!! :beerchug:

What other 12AT7s have administered gluteal punishment to Vali ? 😫 I’ll suggest RFT ECC81 (foil getter), Brimar CV455 KB/FB (Footscray), NOS Mullard gold pin 6201… 🤷🏻‍♂️☑️
 
Last edited:
Feb 23, 2023 at 11:07 PM Post #6,159 of 6,436
wrong section. So Vali news ... Ge 5670 on the bay now is a great deal, NIB and sounds pretty good! Less than ten bux!
… look at how many have been sold … 🤪
 
Feb 23, 2023 at 11:08 PM Post #6,160 of 6,436
What other 12AT7s have administered gluteal punishment to Vali ? 😫 I’ll suggest RFT ECC81 (foil getter), Brimar CV455 KB/FB (Footscray), NOS Mullard gold pin 6201… 🤷🏻‍♂️☑️

Thanks j!

Don't even get me started. lol I used to own a Mapletree Ear+HD. Awesome amp. Had some nice 12xx7, 7025s (my fav) and 5751's, but some tough times came about and had to sell it. Included all the tubes with it. Little did I know, 5 years ago the adapters were gonna be in full swing. I could have used them with my WA2 and Vali 2+.

But the amp went to a very cool head-fier and found a great home. Happy about that. :beerchug:
 
Feb 24, 2023 at 12:15 AM Post #6,161 of 6,436
Thanks j!

Don't even get me started. lol I used to own a Mapletree Ear+HD. Awesome amp. Had some nice 12xx7, 7025s (my fav) and 5751's, but some tough times came about and had to sell it. Included all the tubes with it. Little did I know, 5 years ago the adapters were gonna be in full swing. I could have used them with my WA2 and Vali 2+.

But the amp went to a very cool head-fier and found a great home^^. Happy about that^^. :beerchug:
…^^ a wonderful appraisal there! Keep the tunes cranking and the tubes spanking … a sore 😖 amp is a slap-happy amp 🥲☑️
 
Feb 27, 2023 at 11:58 PM Post #6,162 of 6,436
This is for @HeatFan12: even though in a Woo WA3, Raytheon JAN 5670 (windmill getter) pair is a spanker! A wonderful, atmospheric, full-toned companion to Tung Sol 5998. Maybe both in your WA2? Or Raytheon by itself in Vali 2? 🤷🏻‍♂️.
D9B2F912-78FC-45EB-A1AA-8D64C054FF8B.jpeg

…. the harder the spanking, the greater the thanking …. sez the headphone amp …. 🤪
 
Last edited:
Mar 1, 2023 at 1:52 PM Post #6,163 of 6,436
This is for @HeatFan12: even though in a Woo WA3, Raytheon JAN 5670 (windmill getter) pair is a spanker! A wonderful, atmospheric, full-toned companion to Tung Sol 5998. Maybe both in your WA2? Or Raytheon by itself in Vali 2? 🤷🏻‍♂️.
D9B2F912-78FC-45EB-A1AA-8D64C054FF8B.jpeg
…. the harder the spanking, the greater the thanking …. sez the headphone amp …. 🤪


Get it J!!! Beautiful amp!! Great combo on the tubes with the 5998s and 5670s. Spanker for sure!! :beerchug:

I'm gonna fit the Vali 2+ later on with some 12AU7s, to see how if fares. Cheers!
 
Mar 1, 2023 at 3:28 PM Post #6,164 of 6,436
Get it J!!! Beautiful amp!! Great combo on the tubes with the 5998s and 5670s. Spanker for sure!! :beerchug:

I'm gonna fit the Vali 2+ later on with some 12AU7s, to see how if fares. Cheers!
Funny you mention that, I stepped back to my roots and plugged my 6189 black-plate (one of the first NOS I bought) in just last night. I do like 12au7 types with the Vali
 
Apr 24, 2023 at 4:24 PM Post #6,165 of 6,436
Hey all, new here but over the last couple weeks I have tried a bunch of tubes in my Vali2++'s. For anyone else new that is checking out this thread for ideas, the GE 5-Star 5670 has been my favorite so far.

I mainly listen to alternative, classic rock, and EDM of various types and that tube has full / deep bass without being sloppy and good clarity through the mids and up.
 

Users who are viewing this thread

Back
Top