pddjsteve
100+ Head-Fier
- Joined
- Jan 26, 2006
- Posts
- 212
- Likes
- 10
Quote:
Edit: Well, I think there is going to be enough clearance because there is the resistor next to the socket. The thing that concerns me is the jfets for class-a. If they are flush with the board and the buffer is socketed I think it will be ok.
Quote:
Yeah, it looked better when I had it open in Eagle. I already fixed it, I was just too lazy to update the picture.
Originally Posted by rsabo There's not a lot of spare room on the left side of the left buffer on the pimeta when using a RK27 'blue velvet' pot - are you sure this will fit? I used an SMD buffer and vertical resistor for my adapters and it's a snug fit. |
Edit: Well, I think there is going to be enough clearance because there is the resistor next to the socket. The thing that concerns me is the jfets for class-a. If they are flush with the board and the buffer is socketed I think it will be ok.
Quote:
Originally Posted by rsabo Edit: Also, you might want to move those two topmost traces more apart. eyeballing it, it doesn't look nearly far enough apart. |
Yeah, it looked better when I had it open in Eagle. I already fixed it, I was just too lazy to update the picture.